EE was picking up pot on the roof bolter and twisted his back.
No 20: 151 citaciones de la MSHA Coal
No 20 tiene $36K en multas propuestas de MSHA y $0 pendientes en 26 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en No 20.
- Muertes
- 0
- Incidentes totales
- 24
- Años en registro
- 2006–2009
- Último incidente
- Jul 2009
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.No 20 tiene $36K en multas propuestas de MSHA y $0 pendientes en 26 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 80 · 98%
- Quedaron como emitidas 2 · 2%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2009-1066 | Settlement | Lesnick | 2009 | $5K → $4K |
| KENT 2008-684 | Settlement | Melick | 2008 | $4K → $3K |
| KENT 2009-1553 | Settlement | Lesnick | 2010 | $3K → $2K |
| KENT 2008-689 | Settlement | Lesnick | 2008 | $2K → $2K |
| KENT 2009-1323 | Settlement | Lesnick | 2010 | $2K → $1K |
| KENT 2009-907 | Settlement | Lesnick | 2009 | $2K → $1K |
El muestreo de MSHA en No 20 muestra que 95% de 176 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2009-07-30, hace 17 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.- CONTINUOUS MINER OPERATOR106
- SHUTTLE CAR OPERATOR (STANDARD SIDE)19
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)12
Sílice (cuarzo)
Última medición: 2008-12-15, hace 17 años- CONTINUOUS MINER OPERATOR8
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2008-09-04, hace 17 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- CONTINUOUS MINER OPERATOR2
- ELECTRICIAN2
- SCOOP CAR OPERATOR2
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2009 | 88% | 33 |
| 2008 | 95% | 60 |
| 2007 | 98% | 59 |
| 2006 | 100% | 24 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2008 | 8.8 | 7 |
| 2007 | 8.6 | 6 |
| 2006 | 10.8 | 3 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2008 | 0% | 5 |
| 2006 | 0% | 5 |
No 20 registró 5.31 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2008.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2008 * | 5.31 | 2.66 | 0.000 |
| 2007 * | 8.10 | 5.40 | 0.000 |
| 2006 * | 5.99 | 0.00 | 0.000 |
- Eagle Coal Company Inc 2005 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2009 | 29 | 64,738 |
| 2008 | 29 | 184,887 |
| 2007 | 31 | 191,647 |
| 2006 | 14 | 76,968 |
| 2005 | 0 |
No 20 se ubica en Johnson County, Kentucky, donde la categoría minera del Censo representa el 1.9% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2009 Q3 | 4,142 | 3 | 2 | 724.3 |
| 2009 Q2 | 20,077 | 11 | 3 | 547.9 |
| 2009 Q1 | 21,302 | 20 | 7 | 938.9 |
| 2008 Q4 | 20,744 | 13 | 6 | 626.7 |
| 2008 Q3 | 16,336 | 17 | 6 | 1040.6 |
| 2008 Q2 | 21,288 | 8 | 0 | 375.8 |
| 2008 Q1 | 16,918 | 17 | 9 | 1004.8 |
| 2007 Q4 | 20,929 | 10 | 1 | 477.8 |
Mostrar 8 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 16,333 | 10 | 3 | 612.3 |
| 2007 Q2 | 21,070 | 9 | 1 | 427.1 |
| 2007 Q1 | 15,771 | 19 | 4 | 1204.7 |
| 2006 Q4 | 20,292 | 9 | 4 | 443.5 |
| 2006 Q3 | 13,087 | 2 | 0 | 152.8 |
| 2006 Q2 | 0 | 0 | 0 | |
| 2006 Q1 | 0 | 0 | 0 | |
| 2005 Q4 | 0 | 3 | 1 |
Incidentes reportables
24 en archivo2009 · 7 incidentes
Employee was tramming a ride backwards to turn it around. When the front wheel hit a rock and spinning it out of his hand. When the handle hit his left hand. Spring left hand and bruising it.
EE was making a splice in high line using a utility knife, when the knife slipped and cut his forearm. He received 10 stitches, no lost time.
Employee was cutting a piece of belt line with a utility knife when the knife slipped and cut him on the left leg. 3 stitches, no lost time. Came back to work the next day.
Rock fall in the face at 2 heading. The rock was 15' high, 8' wide and 40' long. Fall is dangered off and supported as per roof control plan. The fall will not be cleaned up.
Employee was unloading structure off flatcar into scoop bucket when he mashed middle finger on right hand between structure and scoop bucket. 2 stitches, returned to work the next day. NO LOST TIME.
EE was walking through a brake in 4 right, he had his head dwon and a T5 channel was hanging down, it hit him on the back of his neck and cut it. He received 15 stitches, he returned to work the next day, no lost time.
2008 · 7 incidentes
Rock fall 2200ft from the face in the return airway in old works, rock was 5ft high, 20ft wide and 30ft long. No injuries or equipment were involded. Fall will not be cleaned up. Fall is dangered off and supported as per roof control plan.
Rock fall, 1100ft from the face in #6 enter x. The fall was 5'high 20'wide and 30'long. The fall will be cleaned up, a clean plan has been developed.
1000 Feet from the face in old works. Roof fall was found at 1105 on 8/14/08. 8'Hx16'W and 60'L. Entrance to fall is dangered off and supported as per roof control plan.
He was making his bolts up and a rock 8"x14"x2" thick fell and struck him in the back of the head. He received a small cut on the back of his head. He received 1 stitch. No lost time.
He was roof bolting when the drill steel got stuck. He tried to get it out when he grabbed the wrong lever and it pulled the canopy over on his right hand. It fractured his right hand/wrist.
2000' feet from the face at #2 entry the fall was 7' high. 14' wide and 40' long, it will not be cleanup . The fall will be dangered off and supported as per roof control plan.
Roof fall 2000 feet from the face. #4 right between #4 and #5 fall was 4' high. 14' wide and 30' long entrance to fall will be dangered off and supported. per roof control plan.
2007 · 9 incidentes
Roof fall 2 breaks outby the face. The fall was 15' high, 18' wide and 30' long. The fall was in #6 right. The entrance to the fall was dangered off and supported as per roof control plan it will not be cleaned up.
Roof fall 3200' from the face at spad #143. Fall was 5' high X 18' wide X 40' long. Entrance was dangered off and supported, as per roof control plan. Fall will not be cleaned up.
Roof fall 3200 feet From: the face at spade #151. Fall was 5 ft high, 19 feet wide, 30 ft long. Entrance was dangered off and supported as per roof control plan. Fall will not be cleaned up.
Roof fall, 3200 feet from the face at spad #111 fall was 5 ft high, 18 ft wide. 80 ft long entrance was dangered off and supported as per roof control plan. fall will not clean up.
Roof fall 2800' from the face in the intake. 42 1/2' high X 19' wide X 19' long. Fall has been dangered off and supported as per roof control plan. I t will not be cleaned up.
Rock fell 3200' from the face in the return airway. Rock was 4.5' high, 19' wide and 60' long. Entrance was dangered off and cribbed. Fall will not be cleaned up.
Another EE was hitting a dust box with a hammer when a piece of the hammer chipped off and hit injured in his right eye. He was 6' away from the dust box. He came back to work on the 9th and 10th. Doctor took him off work on the 12th.
EE was roof bolting with another EE, when the drill steel stopped up with mud. While attempting to clean, the drill came loose and hit EE on the forehead, causing a small cut. He received two stitches. No lost time.
EE had been spray painting. Completed test hole when he turned around and bumped right leg on tee bar on roof bolter.
2006 · 1 incidente
He was pulling bugg anchor up with Johnson 4-wheeler when the lid came up and hit him on his nose. 1 small cut on his nose. 3 stitches, no lost time.