SEDALIA QUARRY Metal/Non-Metal

Employee was welding up two guards when EE took welding helmet off because it was flickering on and off. Employee decided to finish the weld without helmet on. On 2/6/25 EE reported to Supervisor that EE's eyes were bothering EE and EE wanted to go to the doctor. Employee went to clinic and was diagnosed with welding burn and issued prescription eye drops.

Employee was installing a new belt, belt was spliced and employee broke off excess bolts. Employee was using a foldable knife to cut the corners off the belt when the knife slipped and the employee's left forearm went forward scrapping the broken bolts. Employee received a laceration to the left forearm requiring eight stitches.

Employee caught finger on the edge of a screen discharge chute while cleaning the area. Injury required sutures. Employee returned to full duty the next day.

CHANGING A SCREEN DECK. THE GATE FELL BACK TRAP-PING HIS RT. HAND.

EE WAS ATTEMPTING TO ROLL V-BELT ON SHAFT WITH A WRENCH. HE LOST HIS FOOTING AND HE PUT HIS HAND OUT TO CATCH HIMSELF. HIS HAND THEN WENT UNDER THE SHAFT.

LAID AXLE ON BARREL, GOT DOWN ON GROUND TO LOOK AT EQUIPMENT, AXLE ROLLED OFF BARREL ONTO RIGHT FOOT CAUSING CONTUSION

EE WAS PUSHING THE DUMPSTER INTO POSITION - HIT FINGER GOT SMASHED IN BETWEEN THE TRUCK & HUMPSTER. LEFT HAND - LITTLE FINGER.

THERE WAS TROUBLE WITH THE SCREENING PLANT. EE WAS ATTEMPTING TO CHECK THE FUSE, PULLED IT OUT, IT ARCHED CAUSING A SMALL EXPLOSION.

THERE WAS TROUBLE WITH THE SCREENING PLANT. EE WAS ATTEMPTING TO CHECK THE FUSE, PULLED IT OUT, IT ARCHED, CAUSING A SMALL EXPLOSION.

EE WAS WORKING ON THE FEEDER CHAIN ON THE PRIMARY CRUSHING UNIT WHEN THE MOTOR STARTED UP & HIS HAND GOT STUCK.

WHILE GRINDING EXHAUST MANIFOLD ON CASE BACKHOE,EMPLOYEE GOT METAL IN HIS RIGHT EYE.

WHILE GETTING ON A BOBCAT, EMPLOYEE TWISTED AND HIT LEFT KNEE.

CHECKING WATER IN DOZER, EE FELL FROM DOZER'S TRACKS.

EMPLOYEE WAS BEATING, WITH A STEEL BAR, THE FROZEN LINE OF DRIVER PLATE IN ORDER TO MOVE IT. THE BAR CAME BACK AND HIT HIM ON THE RIGHT SIDE OF HIS FACE.

EMPLOYEE ON DOZER, PUSHING THE SCRAPER THROUGH THE DIRT, APPROACHED AND HIT THE SCRAPER TOO HARD. THIS CAUSED SCRAPER OPERATOR INJURE HIS LOWER BACK. INJURED WAS OPERATING THE SCRAPER.

HE GOT OFF DOZER TO CHECK GRADE AND STEP ON ROCKAND TWISTED ANKLE.

EMPLOYEE WAS HELPING STRING WIRE FOR A SHOT WHEN HE STEPPED ON A LUMP OF CLAY & TWISTED HIS LEFT ANKLE

EMPLOYEE STARTED TO CLIMB DOWN FROM A BACKHOE HE WAS OPERATING WHEN HE SLIPPED & FELL.

STEEL POLE FELL OFF CRUSHERS TOP CONVEYOR HITTING EE ACROSS BACK.

PULLING HIMSELF UP ON THE 631B SCRAPER AND PULLED SHOULDER MUSCLE.

WALKING UP STEPS TO METAL DETECTOR TO GET PIECE OF METAL, AND FELL DOWN ON STEPS.

CONSTANT STRAIN OF DRIVING LARGE TRUCK HAS CAUSED EMPLOYEE TO INJURE ROTATOR CUFF IN RIGHT SHOULDER. EMPLOYEE HAD SURGERY ON LEFT ROTATOR CUFF IN JAN. 1993).

PICKING UP DOOR ON IMPAC CRUSHER DUST CONTROL DOOR.

STEPPING OFF BOBCAT AND SLIPPED OFF BOBCAT, SLIPPED ON SMALL PATCH OF ICE INJURING LEFT KNEE.

EMPL OPERATING EARTH MOVING SCRAPER RAN OVER LARGE ROCK. MACHINE CAME OFF THE ROCK CAUSING SEVERE JOLT TO EMPL.

81406IL ON SHOE WENT TO GET IN TRUCK & LEFT FOOT SLIPPED OFF RUNNING BOARD CAUSING THE LEFT KNEE TO HIT RUNNING BOARD

31303RUCK #1 DRIVEN BY INJURED WAS PULLING AWAY FROM THE HOPPER AFTER DUMPING, WHEN CAT TRUCK #2 BACKED INTO HIM.

EMPL PULLING HANDLE ON ELECTRIC BREAKER BOX TO TURN ON ROCK CONVEYOR.BEFORE HANDLE WAS ENGAGED ALL THE WAY,THE BOX EXPLODED CAUSING THE CURRENT TO ARC AND BURN THE EMPL.

KNEELING ON A SCREEN & WELDING FOR A LONG PERIOD OF TIME REPLACING CHUTE ON A SCREENING PLANT

WHILE DRIVING STOCK PILE TRUCK,HIT A BUMP IN ROAD,CAUSING INJURY TO BACK.

EMPL HELPING LIFT ELECTRIC MOTORS INTO STORAGE TRAILER FROM A PICKUP.PULLED MUSCLE ON RIGHT SIDE OF BACK.WENT TO DR WILSON AND WAS GIVEN 2 RXS.ONE FOR PAIN AND ANOTHER TO RELAX MUSCLES.

WORKING ON FRONTEND LOADER, EMPLOYEE PUT LOCTITE ON CROSSBEAM WHEN A GUST OF WIND BLEW IT INTO HIS FACE AND EYES.

GETTING OUT OF TRUCK, EMPLOYEE'S RIGHT FOOT SLIPPED CAUSING HIM TO TWIST HIS LEFT KNEE.

EMPLOYEE WAS TURNING OFF THE PUGMILL. WHEN HE PULLED BACK ON THE CLUTCH HANDLE, IT BUMPED HIS WRIST WHERE HE HAD A CUT. IT BRUISED THE TENDONS IN HIS WRIST.

TRYING TO REMOVE BOULDER FROM JAW CRUSHER PICKED UP LARGE ROCK & PULLED SOMETHING

EMPLOYEE WAS GETTING OUT OF TRUCK TO START CONVEYOR AND TRIPPED ON THE STEPS. FELL ABOUT 3 FEET AND LANDED ON RIGHT FOOT TWISTING BODY TO THE LEFT. RESULTED IN TORN MUSCLE IN BACK.

EMPLOYEE WAS WALKING ON ROCK LEDGE AND TRIPPED AND FELL LANDING ON HIS KNEE. HE SUSTAINED A DEEP BRUISE TO KNEE CAP.

EMPLOYEE WAS LIFTING A LIME COATED SCREEN WHICH RESULTED IN EMPLOYEE GETTING A HERNIA IN HIS LOWER ABDOMEN

EMPLOYEE WAS LOADING A CORNER BIT ON THE BACK OF A TRUCK AND HIT HIS FINGER WITH THE BIT, RESULTING IN A CUT TO THE LITTLE FINGERS ON THE RIGHT HAND.

EMPLOYEE WAS USING A CROWBAR TO PRY ROCKS ARPART. THE CROWBAR SLIPPED OFF THE ROCKS RESULTING IN EMPLOYEE SMASHING HIS FINGER.

EMPLOYEE WAS WORKING ON A CONVEYOR BELT AND IN ORDER TO ACCESS THE AREA THAT NEEDED REPAIR HE HAD TO TWIST HIS BODY WHICH RSULTED IN A STRAINED MUSCLE IN UPPER BACK AND LEFT SHOULDER.

EMPLOYEE WAS MOVING A ROCK IN THE SHAKER WHEN ANOTHER ROCK FELL HITTING HIS THUMB & MASHING IT

SHIELD HAD BROKEN OFF THE CONVEYOR BELT. EMPLOYEE CLIMBED DOWN INTO ROCK BIN TO RETRIEVE SHIELD AND IN HIS ATTEMPT TO GET THE SHIELD OUT OF THE BIN PULLED MUSCLE IN HIS ABDOMEN RESULTING IN A HERNIA.

EMPLOYEE WAS CL9ANING ICE FROM WINDOW OF LOADER. HIS FOOT SLIPPED AND HE FELL TO THE GROUND AND SPRAINED HIS RIGHT WRIST.

PIECE OF DRILL 8TEEL FELL OUT OF HANGER ON DRILL & STRUCK EMPLOYEE ON RIGHT ARM EMPLOYEE HAD TISSUE DAMAGE & BONE BRUISE ABOVE ELBOW ON RIGHT ARM