Registro de la MSHA sobre Jonathan Limestone Underground Mill (ID de mina 3304169). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en Jonathan Limestone Underground Mill.
PUTTING ENGINE PARTS IN A BUCKET & THE ENGINE FELL ON RIGHT ANKLE.
EMPLOYEE WAS UNPLUGGING BELT HEAD AND INHALED FUMES FROM MATERIAL CALLED POND #2 ALUMINUM HYDROXIDE CAUSING THROAT IRRIATATION.
EMPL PUTTING MATERIAL ( POND #2 ALUMINUM HYDROXIDE ) ON BELT WITH LOADER AND FUMES CAUSED RASH AROUND NECK AND THROAT IRRITATION.
EMPLOYEE WAS USING BOBCAT LOADER PUTTING MATERIAL (POND #2 ALUMINUM HYDROXIDE) ON BELT INHALED FUMES FROM MATERIAL. ILLNESS WAS NOT REPORTED TILL 12-19-92.
INJ INSTALLING HAMMERS IN CRUSHER USING A 2 X 4 FOR A GUIDE. IT SLIPPED OUT OF BRACKET CAUSING HAMMER TO FALL AND STRIKE RIGHT KNEE PINNING IT AGAINST FRAME OF ROTOR.
INJURED WAS REMOVING PIN FROM HITCH ON TRUCK.PRY BAR WAS LAYING NEXT TO HIM.HE SWUNG SLEDGE TO DRIVE PIN OIT HIS LEFT ARM HIT BAR AND SPUN IT IN THE AIR STRIKING HIM ABOVE RIGHT EYE.
INSTALLING CYLINDER ON ROCK TRUCK USING CHAIN TO LIFT IT SLIPPED CYLINDER DROPPED PINCHING FINGER IN HOLE
INJURED WAS REMOVING BROKEN WING NOT FROM AIR FILTERS USING VISE GRIP PLIERS. PLIERS SLIPPED OFF NUT AND STRUCK MAN IN MOUTH CHIPPING TOOTH OFF.
HEADACHE SEVERE SINUS INFECTION
INJURED WAS WELDING MIRROR BRACKETS FOR TRUCK WHEN HE WAS WALKING TO TRUCK TO FIT BRACKETS HE TRIPPED OVER TORCH HOSE AND STRUCK HEAD ON WELDER FRAME. SAFETY GLASSES WERE JAMMED INTO EYE BROW CUTTING FOREHEAD REQUIRED A TOTAL OF 32 STITCHES TO CHOOSE WOUND.
INJ HARD FACING SCREEN CHUTE. PIECE OF SLAG OR METAL FELL ON ANKLE CAUSING BURN 3RD DEGREE.
INJURED WAS REMOVING LIMESTONE FROM PLUG UP IN PRIMARY CRUSHER BY THROWING ROCK OUT OF CRUSHER HE TURNED TO THROW ROCK BEHIND HIM AND STRUCK LEFT HAND ON ANOTHER ROCK.
INJ WAS USING JACK HAMMER TO REMOVE CONCRETE FROM REBAR & PIPE BEFORE BURNING THEM OFF WITH TORCH. JACKHAMMER BIT MAY HAVE HIT ONE CAUSING MATERIAL TO FLY & IMBEDDING IN EYE THIS HAPPENED AT U NDERGROUND CRUSHER AREA.
INJURED WAS MOVING ROCAK AWAY FROM CRUSHER OPENING TO UNPLUG CRUSHER WHEN ROCK SLIPPED PINCHING FINGER ON RIGHT HAND 3 RD AND 4 TH FINGER.
INJURED WAS PUTTING PATER MATERIAL ON BELT, THRU A HOPPER WITH BOBCAT LOADER, ROCK CAME OUT OF BUCKET AND CAUGHT UNDER HOPPER, CAUSING A SPILL. HE DID NOT SHUT BELT OFF, BUT TRIED TO REMOVED LODGED ROCK WITH LEFT HAND. THE ROCK MOVED PINNING FINGERS BETWEEN BELT AND HOPPER BOTTOM.
EMPLOYEE SLIPPED ON STEPS.
EMPLOYEE WAS USING A SQUARE AND KNIFE TO CUT THROUGH A BELT. THE KNIFE SLIPPED AND CUT INTO HIS LEFT INDEX FINGER. THIS RESULTED IN REMOVAL OF FINGERNAIL AND STICHES.
EMPLOYEE WAS CARRYING MATERIALS ON SOME STAIRS AND SLIPPED FALLING INTO A HANDRAIL.
EMPLOYEE WAS RELEASING I BEAM FROM CRANE AND THE SHEAVE FELL PINNING HIS FINGER.
EMPLOYEE WAS ATTEMPTING TO CLEAN OUT SOME ROCKS FROM THE TAIL PULLEY OF A SLOW MOVING GATHER-UP BELT. IN THE PROCESS HIS GLOVE GOT CAUGHT AND PULLED HIS ARM INTO THE PULLEY.
THIS EMPLOYEE WAS HELPING MAINTENANCE PUT A BEARING ON THE PRIMARY CRUSHER. THEY WERE USING A BAR IN THE PROCESS AND IT SLIPPED, RESULTING IN A SMASHED FINGER TO THIS INDIVIDUAL.
RUNNING LOADER BACK WENT OUT CAUSED HIM TO BE IMMOBILIZED HAS HAD PROBLEMS
EMPL WAS LIFITN GPIPE WHEN ON E END FELL PINNING HAND AGAINST BELTLINE FRAME.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.