Gettysburg Quarry: 192 citaciones de la MSHA Metal/Non-Metal

EE placed chock block under wheel of pickup. EE's chock block is attached to the truck with a rope. EE tripped over the rope and landed on right side injuring right upper arm.

Changing screens on the telesmith triple deck.

LACERATION TO THE LEFT INDEX FINGER - WHILE USING EE'S PERSONAL KNIFE OPENING A SHRINK WRAPPED CASE OF GREASE CARTONS EE CUT FINGER

Employee stepped down onto a conveyor tail, lost his balance and fell backward, striking his head and briefly losing consciousness.

laceration left side of nose while removing & installing a new bearing in the return rollers

contusion to the left eyebrow, using a punch bar & sledge hammer to remove a pin in the stacker base of the #10 conveyor - the sledge hammer bounced back from contact with the punch striking the eyebrow

EMP HAD HIS RIGHT ELBOW CAUGHT BETWEEN ROLLER AND CONVEYOR FRAME. WHEN HE SLIPPED CHECKING THE ROLLERS.

EE was helping install cab protector on a truck when it slipped off chain and struck emp in the right shoulder.

Emp was using a digging bar to help loosen a tire on a haul truck. Bar slipped and struck employee in the shoulder area.

Insured worker and another emp were unloading 40ft long pvc pipe when emp lost handle on pipe and it hit him on his right knee. Emp missed 3 days of work. Emp returned to work on 10/13/12.

Emp was installing wear rubber on vsi when lid was lowered, pinching his right forearm.

INSTALLING PULLEY AND FINGER GOT CAUGHT BETWEEN PULLEY AND CONVEYOR FRAME. BROKEN FINGER.

Emp. reported he was working on equipment and felt a pain in his arm, like a bug bite. emp did not go to doctor until 7/31 and was given a note with no restrictions or medical treatment. on 8/12/2008, emp still felt pain and returned to the doctor, and on 8/13 emp had a non metal object removed from his arm. medical treatment and four stiches.

EMP WAS USING A UTILITY KNIFE, CUTTING TOWARDS HIMSELF AND CUT HIS KNEE. EMP MISSED 1 DAY OF WORK AND HAD ONE SUTURE.

EMP WAS CHANGING SCREENS AND BUMPED HIS RIGHT KNEE. WHICH BECAME SORE. EMP MISSED 2 DAYS OF WORK, 5 DAYS OF RESTRICTED DUTY AND RETURNED TO REGULAR DUTY ON 4/28/08.

EMP FELL OFF A STEP LADDER WHILE PERFORMING MAINTENACE/REPAIR ON A STEAM JENNY. STEP LADDER WAS NOT FULLY OPENED, IT WAS PROPPED AGAINST EQUIPMENT.

EMP WAS DESCENDING A 992C CAT LOADER, SLIPPED AND FELL, HURTING LEFT ELBOW AND BUTTOCKS.

Employee was getting cardboard blast hole casing from a shelf. He was turning to toss the casings to the floor and lost his balance. He fell approximately 3 feet to the floor.

EMP. SLIPPED WHILE GETTING IN TO TRUCK AND SPRAINED HIS SHOULDER. EMP. DID NOT SEEK MED. TREATMENT UNTIL 12/27/2007 WHERE HE WAS GIVEN A PRESCRIPTION AND RESTRICTION ON LEFT ARM.

emp stated his wrist was sore from beating ice off of steel. emp did not seek medical treatment until 12/26/07 where he was given a presciption and limited use of his wrist.

Emp was walking from truck to excavator, slipped on snow/ice and jammed right arm. Emp was given percocet and had to wear a sling for one work day.

Burn on left leg due to cleaning boots with steam jenny, EMP DIDN'T REPORT THIS UNTILL 10/26/2007.

EE was shoveling tunnel belt and felt pain in his back. EE took off work fri 8/31/07 without doctor note. EE was told he needed to see a panel doctor, who then put him on restrictions.

EMP WAS LIFTING 40-50 LBS ANVIL AND FELT PAIN IN HIS BACK. EMP MISSED WORK FROM 6/13 TO 6/15. EMP RETURNED TO WORK WITHOUT A RELEASE ON 6/18 AND WAS SENT HOME TO GET ONE. EMP RETURNED TO WORK ON 6/20 WITH RESTRICTIONS.

EMP LIFTED ATTACHMENT FOR BOBCAT(UNI LOADER) AND FELT PAIN IN LEFT SHOULDER

Employee was putting away a chain wrench and got his finger pinched between the chain and wrench.

Employee was dragging a 2" air line and stepped into a gulley and fell. He twisted his knee while falling to the ground and his head struck the ground. His hard hat flew off and his head hit the ground again, without his hard hat.

EMPLOYEE WAS OPERATING EUCLID 0029 WHEN DRIVE SHAFT CAME APART. WHEN THE DRIVE SHAFT CONTINUED TO SPIN, IT KNOCKED OUT BOTH REAR BREAKING CYLINDERS. THE TRUCK DESCENDED A GRADE, AND PARTIALLY UP ANOTHER GRADE, THEN ROLLED BACK INTO THE HIGHWALL.

Employee was operating an Euclid R-13 haul truck. He lost control of vehicle and jumped out. Scrapes and cuts, mostly to legs.

EMPLOYEE SLIPPED AND DISLOCATED HIS PINKY FINGER.

Employee was wearing safety glasses and got debris in his eye when air hose was directed towards him. Dirt got in under safety glasses.

EMP WAS WELDING AND FELL BRUISING HIS STERNUM

EMP WAS DISLODGING A ROCK BETWEEN REAR TIRES. ROCK SPLIT CAME BACK AND STRUCK EMP IN LEG REQUIRING STICHES.

HYD. PUMP WAS NOT LOCKED INTO POSITION AND CLOSED ONTO EMP'S FINGERS SMASHING THEM

EMP. TRIPPED ON SAFETY LANYARD WHILE DOING MAINTENANCE AND FELL ONTO HIS THUMB. EMP WORK FROM DAY OF INJURY UNTILL 6/14/04 WHEN DOCTOR PUT HIM ON RESTRICTED DUTY. WE DID NOT HAVE A JOB FOR HIM TO DO WITH HIS RESTRICTIONS, SO HE WAS OFF. EMP RETURNED TO LIGHT DUTY ON 7/6/04.

EMPLOYEE SLIPPED WHILE DESCENDING LOADER AND CAUGHT HIMSELF BEFORE FALLING BUT FELT PAIN IN HIS SHOULDER.

EMP WAS CHANGING AC UNIT IN CONTROL TOWER, WHILE DOING SO HE FELT SHOULDER POP AND HAD PAIN IN SHOULDER.

EMP WAS REPAIRING A HOSE, WHEN IT SLIPPED FROM HIS HAND AND A METAL BAND AROUND HOSE CUT HIS THUMB.

EMPLOYEE WAS USING TARP STRAP. IT CAME LOOSE AND HIT HIM IN THE MOUTH.

EE WAS STUNG BY A BEE. HAD ALLERGIC REACTION AND WAS SENT HOME BY HOSPITAL. EE DID NOT HAVE HIS MEDICATION WITH HIM AT TIME HE WAS STUNG.

EE WAS DISMOUNTING WATER TRUCK. SLIPPED FELL AND TWISTED RIGHT ANKLE.

EMPLOYEE WAS DISMOUNTING HIS LOADER AND MISSED LAST STEP AND FELL. EMPLOYEE HAD A HAIRLINE FRACTURE ON RIGHT WRIST.

EMPLOYEE WAS TIGHTENING AIR LINE ON EUCLID WHEN HE FELT SHARP PAIN IN HIS BACK.

EE WAS USING AWRENCH TO TAKE BOLTS OUT OF CRUSHER WHEN HIS ARM WENT NUMB. NOTE: EE DID NOT SEE DR. UNTIL 10-02-2000.

EMPLOYEE WAS CARRYING A METAL CHUTE, WHEN IT SLIPPED FROM HIS HANDS AND FELL ONTO HIS LEFT FOOT.THE EMPLOYEE WAS WEARING STEEL TOED WORK BOOTS, BUT STILL LACERATED AND BROKE HIS BIG TOE.

EE WAS USING A GRINDER TO CUT OUT OLD LACERS ON A CONVEYOR BELT, WHEN A SMALL PIECE OF METAL FLEW INTO HIS LEFT EYE DESPITE THE USE OF SAFETY GLASSES.

EE WAS REMOVING STONES FROM JAMMED AC CONE CRUSHER WHEN HE SLIPPED AND FELL INTO SIDE OF CRUSHER HITTING HIS LOWER RIGHT RIBS.

EE WAS REMOVING THE SCREEN GUARDS TO GAIN ACCESSTOT HE BELTS. THE WRENCH SLIPPED FROM HIS HAND AND HIS LEFT ARM SLID ACROSS THE SCREEN CAUSING ASMALL LACERATION WHICH REQUIRED 4 STITCHES.

EE WAS USING THE BOBCAT TO MOVE TOGGLE PLATES UNDER THE JAW. AS HE EXITED THE BOBCAT HIS FOOT SLIPPED & HE FELL TO THE GROUND INJURING HIS SHOULDER.

EMPLOYEE WAS PERFORMING ROUTINE MAINTENANCE AND SOME REPAIRS ON THE POWERSCREEN. HE SLIPPED AND FELL APPROXIMATELY 5 FEET TO THE GROUND. HE SUSTAINED MULTIPLE CONTUSIONS AND A BROKEN WRIST.

EXITING THE CRUSHER SHED, EE SLIPEPD ON STONES AND LOST HIS BALANCE, HITTING HIS RIGHT FOREARM ON THE EDGE OF THE PLATFORM.

EMP WAS SHOVELING MUD FROM BENEATH THE CONVEYOR BELT. EXPERIENCED BACK PAIN RADIATING DOWN LEFT LEG.

A CRANE WAS POSOTIONING THE TOGGLE PLATE BEHIND THE JAW. EE WAS WAITING TO POSITION THE PLATE. THE METAL LIFTING EYE WELDED ONTO THE PLATE BROKE. THE PLATE FELL ONTO THE EE CRUSHING HIS RIGHT HAND SEVERAL STICHES, NO BROKEN BONES AND BRUISING UPPER LEFT LEG. HIS RIGHT HAND RECEIVED A CAST AND A SLING.

USING HAND GRINDER, GRINDING PIECE OF METAL ON SCRUBBER WHEN A PIECE OF RUST FLEW INTO EYE BETWEEN FACE AND SAFETY GLASSES.

ROCK FELL OFF OF HAUL TRUCK. BENT DOWN TO PICK UP ROCK & WHEN HE DID HE HURT BACK.

LIFTING WET MUDDY ROCK ROCK SLIPPED AND LACERATED FINGER.

LAYING ON BACK DRILLING HOLE IN TRUCK CAB WITH DRILL, METAL SHAVING FELL IN LEFT EYE.

SETTING CONE CRUSHER,WENT TO INSPECT OIL TANK,STEPPING DOWN-LOST BALANCE FELL AGAINST RAIL BREAKING RIBS.

DRILLING OUT BOLT WHEN PIECE OF METAL FLEW INTO R EYE

CHECKING AIR LEAK ON EUCLID, WENT TO CLIMB DOWN AND CAUGHT WEDDING RING AND RIPPED FLESH ON FINGER.

WORKING ON COVEYOR FLASHING LOOSENING BOLTS.APPLIED PRESSURE TO WRENCH WHEN SHARP PAIN OCCURRED IN BACK.

WHILE RUNNING G9INDER A STEEL CHIP FLEW INTO EYEBURNT THE EYE.

MAJOR DEPRESSIO3 NERVES GAVE OUT BECAUSE OF THINGS THAT HAPPEN AT HOME AND HARASSMENT FROM FELLOW WORKERS.

EMPLOYEE WAS CH5NGING LIFT BULB ABOVE A SCREEN AS HE CLIMBED OFF OF SCREEN HIS HAND SLIPPED AND STRUCK SCREEN CAUSING A PUNCTURE AND EMBEDDING A PIECE OF METAL IN HIS RIGHT HAND.

I NAME WAS SERV3CING HIS EUCLID AND WAS ATTEMPTING TO DIG MUD OFFTHE TRANSMISSION WITH A SCREW DRIVER WHEN HIS RIGHT HAND SLIPPED OFF THE SCREW DRIVER AND FORCEFULLY STRUCK THE SIDE OF THE TRA NSMISSION. 3

WHILE SCRAPING 7ATWALK OF CRUSHER WITH A WOODEN HANDLED SCRAPER, TO FREE SOME FROZEN DIRT, A SHARP PAIN DEVELOPED IN LOWER BACK

I,NAME AND ANOT2ER EMPLOYEE WERE DRIVING A BUSHING OUT OF A CRANE BOOM. I,NAME WAS HOLDING THE PUNCH AND AS THE OTHER EMPLOYEE POUNDED THE BUSHING THE HAMMER GLANCED OFF AND HIT HIS HAND.

THE INJURED EMP5OYEE WAS ATTEMPTING TO BACK THE EUCLID HE WAS OPERATING TO THE EDGE OF THE STOCKPILE TO DUMP HIS LOAD. HE BACKED TOO FAR AND THETRUCK ROLLED DOWN THE STOCKPILE.

HE WAS CLIMBING3OUT OF SHOVEL WHEN HIS FOOT CAUGHT ON DOOR SILL OF SHOVEL AND FELL TO GROUND.

HELPING TO CHANGE SCREENS ON PLANT WHILE USING A WRENCH IT SLIPPED AND A BOLT HEAD CUT INDEX FINGER ON RIGHT HAND

CHANGING SCREEN ON PLANT - PICKED UP 2 X 4 BOARD TO HIT CLAM PLATE AS HE D R EW BACK THE 2 ? 4BOUNCED OFF AND CAUGHT EMPLOYEES FINGER BETWEEN WALL OF SHAKER BED AND THE 2X4

EMPLOYEE WAS REPAIRING MACK TRUCK AND IN LIFTING THE TIRES AND TWISTING TO INSTALL THEM ON THE TRUCK, EMPLOYEE INJURED HIS BACK.

EMPL GETTING OFF SHOVEL AT END OF WORK DAY.STEPPED ON CATS OF SHOVEL.CATS WERE WET AND EMPL SLIPPED STRIKING RIB ON CATS.

EMPLOYEE WAS LIFTING SWING LININGS FROM SWING OF SHOVEL WHEN HE TWISTED HIS BACK.