The man rode on the personnel carrier at the beginning of the shift to the section. When he arrived at the section, he reported that he had back pain from hitting a bump while riding on the carrier.
Roytown Deep Mine: 724 citaciones de la MSHA Coal
Roytown Deep Mine tiene $498K en multas propuestas de MSHA y $0 pendientes en 56 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Roytown Deep Mine.
- Muertes
- 0
- Incidentes totales
- 69
- Años en registro
- 2005–2013
- Último incidente
- May 2013
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Roytown Deep Mine tiene $498K en multas propuestas de MSHA y $0 pendientes en 56 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 184 · 87%
- Quedaron como emitidas 2 · 1%
- Anuladas o retiradas 25 · 12%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| PENN 2009-133 | Settlement | Bulluck | 2010 | $224K → $17K |
| PENN 2008-196 | Settlement | Bulluck | 2009 | $71K → $11K |
| PENN 2009-43 | Settlement | Barbour | 2010 | $45K → $6K |
| PENN 2008-310 | Settlement | Barbour | 2009 | $36K → $7K |
| PENN 2009-170 | Withdrawal | Harner | 2010 | $22K → $109 |
| PENN 2007-317 | Settlement | Hodgdon | 2008 | $20K → $3K |
El muestreo de MSHA en Roytown Deep Mine muestra que 93% de 1,151 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2013-10-28, hace 12 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.- CONTINUOUS MINER OPERATOR518
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)94
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)92
Sílice (cuarzo)
Última medición: 2013-10-31, hace 12 años- CONTINUOUS MINER OPERATOR35
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2013-04-08, hace 13 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)19
- SHUTTLE CAR OPERATOR (STANDARD SIDE)19
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)17
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2013 | 98% | 52 |
| 2012 | 97% | 113 |
| 2011 | 97% | 137 |
| 2010 | 98% | 152 |
| 2009 | 99% | 79 |
| 2008 | 94% | 153 |
| 2007 | 90% | 182 |
| 2006 | 82% | 207 |
| 2005 | 89% | 76 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2013 | 17.8 | 4 |
| 2012 | 6.9 | 3 |
| 2011 | 6.7 | 7 |
| 2010 | 6.0 | 8 |
| 2009 | 8.1 | 2 |
| 2008 | 14.3 | 20 |
| 2007 | 6.0 | 14 |
| 2006 | 8.0 | 38 |
| 2005 | 7.3 | 10 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2013 | 13% | 8 |
| 2012 | 7% | 15 |
| 2010 | 17% | 24 |
| 2009 | 0% | 17 |
| 2008 | 25% | 16 |
| 2007 | 31% | 16 |
| 2006 | 0% | 3 |
Roytown Deep Mine registró 15.42 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2013.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2013 * | 15.42 | 3.85 | 0.000 |
| 2012 | 10.53 | 0.00 | 0.000 |
| 2011 | 12.00 | 1.00 | 0.000 |
| 2010 | 1.08 | 0.00 | 0.000 |
| 2009 | 21.69 | 18.35 | 0.000 |
| 2008 | 11.20 | 11.20 | 0.000 |
| 2007 | 9.21 | 7.89 | 0.000 |
| 2006 | 5.31 | 3.98 | 0.000 |
- RoxCoal Inc 2004 a 2008
- Elk Lick Energy Inc 2008 a 2009
- RoxCoal, Inc. 2009 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2025 | 0 | |
| 2024 | 0 | |
| 2023 | 0 | |
| 2022 | 0 | |
| 2021 | 0 | |
| 2020 | 0 | |
| 2019 | 0 | |
| 2018 | 0 | |
| 2017 | 0 | |
| 2016 | 1 | |
| 2015 | 1 | |
| 2014 | 4 | |
| 2013 | 24 | 55,217 |
| 2012 | 86 | 227,073 |
| 2011 | 91 | 300,748 |
| 2010 | 83 | 356,545 |
| 2009 | 56 | 191,891 |
| 2008 | 66 | 195,034 |
| 2007 | 72 | 279,574 |
| 2006 | 75 | 467,876 |
| 2005 | 55 | 192,931 |
Roytown Deep Mine se ubica en Somerset County, Pennsylvania, donde la categoría minera del Censo representa el 1.6% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q1 | 0 | 0 | 0 | |
| 2024 Q4 | 0 | 0 | 0 | |
| 2024 Q3 | 0 | 0 | 0 | |
| 2024 Q2 | 0 | 0 | 0 | |
| 2024 Q1 | 0 | 0 | 0 | |
| 2023 Q4 | 0 | 0 | 0 | |
| 2023 Q3 | 0 | 0 | 0 | |
| 2023 Q2 | 0 | 0 | 0 |
Mostrar 73 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q1 | 0 | 0 | 0 | |
| 2022 Q4 | 0 | 0 | 0 | |
| 2022 Q3 | 0 | 0 | 0 | |
| 2022 Q2 | 0 | 0 | 0 | |
| 2022 Q1 | 0 | 0 | 0 | |
| 2021 Q4 | 0 | 0 | 0 | |
| 2021 Q3 | 0 | 0 | 0 | |
| 2021 Q2 | 0 | 0 | 0 | |
| 2021 Q1 | 0 | 0 | 0 | |
| 2020 Q4 | 0 | 0 | 0 | |
| 2020 Q3 | 0 | 0 | 0 | |
| 2020 Q2 | 0 | 0 | 0 | |
| 2020 Q1 | 0 | 1 | 0 | |
| 2019 Q4 | 0 | 0 | 0 | |
| 2019 Q3 | 0 | 0 | 0 | |
| 2019 Q2 | 0 | 0 | 0 | |
| 2019 Q1 | 0 | 0 | 0 | |
| 2018 Q4 | 0 | 0 | 0 | |
| 2018 Q3 | 0 | 0 | 0 | |
| 2018 Q2 | 0 | 0 | 0 | |
| 2018 Q1 | 0 | 0 | 0 | |
| 2017 Q4 | 0 | 0 | 0 | |
| 2017 Q3 | 0 | 0 | 0 | |
| 2017 Q2 | 0 | 0 | 0 | |
| 2017 Q1 | 0 | 0 | 0 | |
| 2016 Q4 | 0 | 0 | 0 | |
| 2016 Q3 | 21 | 0 | 0 | 0.0 |
| 2016 Q2 | 18 | 0 | 0 | 0.0 |
| 2016 Q1 | 0 | 0 | 0 | |
| 2015 Q4 | 0 | 0 | 0 | |
| 2015 Q3 | 0 | 0 | 0 | |
| 2015 Q2 | 232 | 0 | 0 | 0.0 |
| 2015 Q1 | 952 | 0 | 0 | 0.0 |
| 2014 Q4 | 2,276 | 0 | 0 | 0.0 |
| 2014 Q3 | 1,088 | 1 | 0 | 919.1 |
| 2014 Q2 | 1,100 | 1 | 1 | 909.1 |
| 2014 Q1 | 2,609 | 1 | 0 | 383.3 |
| 2013 Q4 | 2,729 | 7 | 1 | 2565.0 |
| 2013 Q3 | 2,337 | 0 | 0 | 0.0 |
| 2013 Q2 | 26,605 | 5 | 1 | 187.9 |
| 2013 Q1 | 20,216 | 12 | 1 | 593.6 |
| 2012 Q4 | 26,311 | 6 | 0 | 228.0 |
| 2012 Q3 | 49,972 | 25 | 3 | 500.3 |
| 2012 Q2 | 52,647 | 21 | 4 | 398.9 |
| 2012 Q1 | 60,963 | 36 | 0 | 590.5 |
| 2011 Q4 | 51,746 | 22 | 1 | 425.2 |
| 2011 Q3 | 54,825 | 26 | 1 | 474.2 |
| 2011 Q2 | 49,806 | 17 | 5 | 341.3 |
| 2011 Q1 | 43,573 | 12 | 2 | 275.4 |
| 2010 Q4 | 48,464 | 32 | 1 | 660.3 |
| 2010 Q3 | 49,520 | 32 | 3 | 646.2 |
| 2010 Q2 | 46,582 | 27 | 3 | 579.6 |
| 2010 Q1 | 40,808 | 28 | 5 | 686.1 |
| 2009 Q4 | 39,969 | 26 | 3 | 650.5 |
| 2009 Q3 | 28,492 | 14 | 1 | 491.4 |
| 2009 Q2 | 25,059 | 16 | 0 | 638.5 |
| 2009 Q1 | 26,362 | 12 | 1 | 455.2 |
| 2008 Q4 | 36,530 | 23 | 6 | 629.6 |
| 2008 Q3 | 39,854 | 20 | 4 | 501.8 |
| 2008 Q2 | 36,601 | 9 | 6 | 245.9 |
| 2008 Q1 | 29,852 | 9 | 4 | 301.5 |
| 2007 Q4 | 26,087 | 14 | 7 | 536.7 |
| 2007 Q3 | 40,610 | 51 | 23 | 1255.8 |
| 2007 Q2 | 41,971 | 56 | 17 | 1334.3 |
| 2007 Q1 | 43,403 | 49 | 13 | 1129.0 |
| 2006 Q4 | 39,744 | 36 | 12 | 905.8 |
| 2006 Q3 | 42,544 | 15 | 1 | 352.6 |
| 2006 Q2 | 35,361 | 23 | 4 | 650.4 |
| 2006 Q1 | 33,132 | 4 | 1 | 120.7 |
| 2005 Q4 | 28,283 | 10 | 2 | 353.6 |
| 2005 Q3 | 25,504 | 9 | 2 | 352.9 |
| 2005 Q2 | 39,326 | 10 | 6 | 254.3 |
| 2005 Q1 | 4,737 | 1 | 0 | 211.1 |
Incidentes reportables
69 en archivo2013 · 4 incidentes
The man was pulling miner cable to place against the rib when he stated he developed pain in his low back.
The man was bending a roof bolt and installing the bolt in the roof bolter chuck. While straightening the bolt, the plate slid down the bolt and pinched his finger between the plate and chuck.
The man was scaling down loose roof in an area supported with roof bolts and straps when a piece of rock fell and struck the man on the head.
2012 · 10 incidentes
The man was walking in the section when he felt a pain in his back.
The man was scaling roof rock with a rock bar when a piece of scale struck the man on the arm. Report filed for Medical Treatment Only (stitches)
The man was pushing up on a panel on a Kennedy wall when he felt a pain in his wrist.
The man was adjusting the canopy on a shuttle car. The socket he placed on a bolt fell off the bolt before he attached the ratchet to the socket. The socket struck the man on the lip. Report filed for Medical Treatment Only (Stitches).
The man was preparing to re-position the roof bolter when a piece of roof scale fell between the roof bolts and struck the man on the back.
The man was repairing a sprocket on a shuttle car when the lid slipped and struck the man's fingers. The man received medical treatment on 5-17-12 to receive stitches.
The man was tramming a personnel carrier on the travelway when he hit a rut causing the steering wheel to spin around and strike his hand. Report filed for Medical Treatment Only.
The man was rock dusting in a crosscut when a piece of roof rock fell between the roof bolts and struck the man on the hardhat and knee.
The man was pulling roof mats off of the supply scoop when he cut his finger on the edge of the mat. Report filed for medical treatment only.(Stitches)
The man was installing a roof bolt when a piece of roof rock fell from around the bolt and struck the man on the thigh.
2011 · 12 incidentes
The man was placing his hand on the roof bolter when he slipped and struck his mouth against the base of the roof bolter canopy. Report filed for Medical Treatment Only(chipped tooth)
The man was walking up an entry when he struck his ear against a metal roof mat. Report filed for Medical Treatment Only (stitches)
The man was bending a roof bolt as he was preparing to install it into the roof when he felt a pain in his lower back. The man continued to perform his normal work duties until 10-28-11 at which time he went on restricted duty status.
The man was walking in the section when he stepped in a hole and twisted his knee.
The man was bending a roof bolt when he fell forward and struck his forehead against the ATRS system on the roof bolting machine. Report filed for Medical Treatment Only. (stitches)
The man was removing a piece of rock from the continuous miner with a rock pry bar when he struck his hand against the mine roof and lacerated his hand. Report filed for Medical Treatment Only(stitches)
The man was operating a personnel carrier on the outby travelway when a piece of roof scale fell and struck the man on the hardhat.
The man was changing drill steels at the roof bolter head when a piece of roof scale fell and struck the man on the right hand. Report filed for Medical Treatment Only (stitches)
While crossing the belt, the man stepped onto the bottom and twisted his ankle.
As the man began drilling the roof, a piece of roof scale fell and struck the man on the hand. Report filed for Medical Treatment Only.
The man was shoveling coal onto the conveyor belt when he felt pain in his shoulder. The man continued to work his regular duties until 8-22-11 when he went on restricted duty status.
The man was bending a roof bolt while pushing it into the roof when he felt a pain in his shoulder.
2010 · 2 incidentes
The man was tightening a shuttle car tire with a socket wrench. The wrench slipped off the bolt causing the man to strike his hand against the frame of the machine. Report filed for Medical Treatment Only.
While putting a box of resin on the roof bolter tray, a piece of roof rock fell and struck the man on the shoulder. The man continued to work at regular job duties until 3-4-10 at which time he reported off work.
2009 · 13 incidentes
EE was cleaning rock off of the cont. miner when a piece fell and struck the EE on the foot behind the steel toe. Report filed for medical treatment only.
The man was lying under a feeder burning with a torch when a piece of slag went into his ear. The man worked in regular job until 12-1-09 when he reported off.
Man was guiding the drill steel to the roof and a piece of scale fell and struck the man on the hand.
The man was lifting crib blocks when he felt a pain in his back. Man worked until 11/17/09 at which time he reported off.
The man was tramming a shuttle car when the canopy struck a roof mat ripping the mat from the roof. The end of the mat came towards the operator's compartment lacerating the man's hand.
While spinning a roof bolt in the roof a piece of scale fell and struck man on the lip. Note: report filed for medical treatment only (stitch)
The man was lifting the end of a cross bar when the other end fell off the pile causing the mans arm to jerk. NOTE: man continued to work regular duties until 9/17/09 when he reported off work.
Man was swinging boom out on roof bolter when a piece of roof rock fell between the roof, rib and ATRS and struck man on thigh.
The man was closing the scrubber compartment door on the continuous miner, when he pinched his finger between the door and the machine.
The man was making a splice in a cable when the screwdriver slipped and lacerated his thumb. The man worked until 4-27-09 at which time he reported off.
the man was installing a roof bolt near the rib. As he lower the head of the bolter, it struck his right thigh.
The man was knocking a used drill bit off of a drill steel when the bit bounced off the canopy and down his shirt collar.
The man was standing behind the roof bolter. When the cable reel was started, the cable struck the man on the leg and knocked him down.
2008 · 8 incidentes
EE was bending a roof bolt when he slipped and felt a pain in his back. The man continued to work untill 11/20/08 at which time he reported off.
The man was lifting an oil can and felt a pain in his back.
The continuous miner was loading into a shuttle car. A piece of rock bounced off the shuttle car and into the crosscut and struck the man on the leg. The man continued to work until 10/15/08 which was his first day of work.
The EE was pilling miner cable when he felt a pain in his shoulder.
The man was walking up the Entry when he struck his back against a metal strap.
The man was lifting his tool box when it slipped out of his hand and struck him on the left middle finger.
The man was lifting a roll of conveyor belt when he felt a pain in his right shoulder.
The man was lifting belt structure when he felt pain in his lower back.
2007 · 9 incidentes
The man was trimming a shovel handle with a knife when the knife slipped and cut the man's left thumb. Report filed for medical treatment only-stitches.
The man was lifting a piece of belt structure, when he felt a pain in his back.
Man was walking through the equiment airlock door in #5 entry when he bumped his head against the door frame. Man continued to work until 10/3/07 at which time he reported off.
Lump on knee; doesn't remember doing anything to injure knee; gradually getting worse. *Last day worked was 8-9-07.
EE was sitting on same side as scoop operator, approx 50' outby scoop. Scoop operator made a pass to the face, during time EE moved to blind side of scoop. Scoop came around corner, ran over EE's foot.
Checking outside belts: got dirt in right eye.
EE placed his right hand on the drill head for body support while observing roof conditions. His hand slipped, causing EE to strike gloved hand on drill head. Roof bolter not energized. EE continued to work regular duty until 6/13/07, at which time he went on restricted duty.
While advancing a crosscut left off #4 entry of mecharized mining at #00-0 near survey station #1228 a 3" borehole was cut into. Mining operations ceased until the hole was plugged and a 103(R) order issued by MSHA was terminated. There were no injuries and no property damage. MSHA national hotline was notified.
Injured EE was holding onto drill steel with up pressure on head. He was attempting to drop head to change bit end. Steel broke in 2 pieces. Top part remained in roof & other part in drill head. Upward pressure abruptly raised to roof injuring thumb.
2006 · 4 incidentes
Injured empliyee was attempting to park mantrip in a charging station. Left front tire struck rib line, while attempting to back up from rib-steering wheel turned abruptly in oposite direction striking employee on ungloved hand.
Injured employee was assisting witness named on report unsecuring portable rockduster. Tongue hitch was being blocked. Witness lost control of hitch, dropping same on injured's finger.
EE states he slipped on sloped, wet bottom while carrying 50lb bag of rock dust, landing on right hip. No accident report filed, sought treatment on 3/30/06. Advised mine management 3/30/06.
Employee claims he felt hot flash in lumbar area while handling continous miner cable. Area where accident occured was four feet high slightly sloped to left, bottom was wet. Employee worked entire shift, did not report injury until arriving at residence two hours later
2005 · 7 incidentes
EMPLOYEE WAS STRUCK ON HIS FACE BY DRILL STEEL THAT WAS STUCK IN DRILL HOLE. STEEL SUDDENLY DISLODGED, STRIKING EE & CAUSING A LACERATION TO HIS LEFT CHEEK, REQUIRING 7 SUTURES FOR CLOSURE.
INJURED PERSON WAS INSTALLING A RESIN GROUTED ROOF BOLT WHEN HE INADVERTENTLY PINCHED TWO FINGERS OF HIS LEFT HAND BETWEEN THE ROOF BOLT BEARING PLATE AND THE ROOF. HE SUSTAINED OPEN FRACTURES OF THE MIDDLE AND RING FINGERS ON HIS LEFT HAND WHICH WILL REQUIRE HIM TO LOSE TIME FROM WORK.
Injured person moved a pump from one working face area to another. That afternoon he reported having back pain from moving the pump. He later that same day also reported pain in left shoulder. He sustained a strain of low back and left shoulder.
Employee had accumulations of rock in knee pads. On attempting to kneel down he states sharp pain felt in right knee. Area progressively became swollen, warm to touch over the following week. Sought treatment on 9-27-05.
EMPLOYEE WAS WALKING IN AN ENTRY IN A BENT FORWARD POSITION. HE IS 6'3" TALL AND THE ENTRY IS 5'6" HIGH. HE FELT A SHARP PAIN IN LOWER BACK WHILE WALKING.
EMPLOYEE WAS ATTEMPTING TO REMOVE SUCTION HOSE FROM ROOF BOLTER DRILL HEAD. HOSE DISCONNECTED ABRUPTLY CAUSING EE'S LEFT HAND (UNGLOVED) TO STRIKE THE FRAME OF THE MACHINE.
Continous Miner was tramming in reverse direction. Injured employee reached to move cable/h20 line from rear of machine. Finger was caught between miner and line post.