Clamp failure allowed metal cup to dislodge, striking employee's nose.
Lane Mtn Silica Quarry & Mill: 361 citaciones de la MSHA Metal/Non-Metal
Lane Mtn Silica Quarry & Mill tiene $117K en multas propuestas de MSHA y $6K pendientes en 19 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Lane Mtn Silica Quarry & Mill.
- Muertes
- 0
- Incidentes totales
- 51
- Años en registro
- 1985–2026
- Último incidente
- Jul 2026
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Lane Mtn Silica Quarry & Mill tiene $117K en multas propuestas de MSHA y $6K pendientes en 19 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 84 · 93%
- Quedaron como emitidas 3 · 3%
- Anuladas o retiradas 3 · 3%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| WEST 2008-1185M | Settlement | Barbour | 2010 | $18K → $12K |
| WEST 2008-1184M | Settlement | Barbour | 2010 | $14K → $9K |
| WEST 2023-0296 | Settlement | Simonton | 2024 | $8K → $3K |
| WEST 2017-0551 | Settlement | Manning | 2018 | $7K → $5K |
| WEST 2019-0295 | Settlement | McCarthy | 2019 | $4K → $1K |
| WEST 2026-0093 | Settlement | Paez | 2026 | $2K → $1K |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2024-12-03
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz4920 en exceso
- Respirable dust, <.1mg23
- Cristobalite, respirable15
Ver los análisis individuales (87)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2024-09-25 | Quartz, respirable, >1% Qtz | 0.27 | 0.25 | 1.08 | Bagging Operator |
| 2024-09-25 | Quartz, respirable, >1% Qtz | 0.64 | 0.19 | 3.37 | Kiln/Dryer Operator |
| 2024-09-25 | Quartz, respirable, >1% Qtz | 0.66 | 0.21 | 3.14 | Kiln/Dryer Operator |
| 2019-06-26 | Quartz, respirable, >1% Qtz | 0.61 | 0.18 | 3.39 | Kiln/Dryer Operator |
| 2016-05-10 | Quartz, respirable, >1% Qtz | 0.32 | 0.31 | 1.03 | Kiln/Dryer Operator |
| 2016-03-29 | Quartz, respirable, >1% Qtz | 0.63 | 0.19 | 3.32 | Ball Mill Operator |
| 2011-08-11 | Quartz, respirable, >1% Qtz | 0.32 | 0.32 | 1.00 | Flotation/Concentrator Oper. |
| 2011-08-11 | Quartz, respirable, >1% Qtz | 0.41 | 0.15 | 2.73 | Crusher Oper/Worker |
| 2008-10-01 | Quartz, respirable, >1% Qtz | 0.49 | 0.34 | 1.44 | Kiln/Dryer Operator |
| 2008-10-01 | Quartz, respirable, >1% Qtz | 0.46 | 0.34 | 1.35 | Kiln/Dryer Operator |
| 2008-04-23 | Quartz, respirable, >1% Qtz | 0.36 | 0.24 | 1.50 | Kiln/Dryer Operator |
| 2008-04-23 | Quartz, respirable, >1% Qtz | 0.28 | 0.14 | 2.00 | Kiln/Dryer Operator |
| 2008-01-17 | Quartz, respirable, >1% Qtz | 0.71 | 0.46 | 1.54 | Kiln/Dryer Operator |
| 2006-08-09 | Quartz, respirable, >1% Qtz | 1.27 | 0.2 | 6.35 | Crusher Oper/Worker |
| 2004-03-31 | Quartz, respirable, >1% Qtz | 0.36 | 0.26 | 1.38 | Bagging Operator |
| 2004-03-24 | Quartz, respirable, >1% Qtz | 0.81 | 0.66 | 1.23 | Kiln/Dryer Operator |
| 2002-11-20 | Quartz, respirable, >1% Qtz | 0.8 | 0.31 | 2.58 | Kiln/Dryer Operator |
| 2002-04-30 | Quartz, respirable, >1% Qtz | 0.38 | 0.2 | 1.90 | Kiln/Dryer Operator |
| 2002-04-30 | Quartz, respirable, >1% Qtz | 0.79 | 0.13 | 6.08 | Crusher Oper/Worker |
| 2001-08-29 | Quartz, respirable, >1% Qtz | 0.72 | 0.49 | 1.47 | Kiln/Dryer Operator |
| 2024-12-03 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2024-12-03 | Quartz, respirable, >1% Qtz | 0.13 | 0.18 | 0.72 | Kiln/Dryer Operator |
| 2024-09-25 | Quartz, respirable, >1% Qtz | 0.2 | 0.22 | 0.91 | Ball Mill Operator |
| 2023-05-12 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2023-05-12 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2023-05-12 | Respirable dust, <.1mg | 0 | Ball Mill Operator | ||
| 2019-10-02 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2019-06-26 | Quartz, respirable, >1% Qtz | 0.14 | Bagging Operator | ||
| 2019-06-26 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2016-05-10 | Quartz, respirable, >1% Qtz | 0.16 | 0.21 | 0.76 | Ball Mill Operator |
| 2016-03-29 | Quartz, respirable, >1% Qtz | 0.15 | 0.34 | 0.44 | Kiln/Dryer Operator |
| 2015-01-11 | Quartz, respirable, >1% Qtz | 0.18 | 0.2 | 0.90 | Kiln/Dryer Operator |
| 2015-01-11 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2015-01-11 | Respirable dust, <.1mg | 0 | Ball Mill Operator | ||
| 2013-08-14 | Quartz, respirable, >1% Qtz | 0.07 | 0.3 | 0.23 | Ball Mill Operator |
| 2013-08-14 | Cristobalite, respirable | 0 | Ball Mill Operator | ||
| 2013-08-14 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2012-06-12 | Quartz, respirable, >1% Qtz | 0.18 | 0.24 | 0.75 | Crusher Oper/Worker |
| 2012-06-12 | Cristobalite, respirable | 0 | Crusher Oper/Worker | ||
| 2012-06-12 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2011-10-26 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2011-10-26 | Respirable dust, <.1mg | 0 | Backhoe Operator | ||
| 2011-10-26 | Cristobalite, respirable | 0 | Crusher Oper/Worker | ||
| 2011-10-26 | Quartz, respirable, >1% Qtz | 0.08 | 0.17 | 0.47 | Crusher Oper/Worker |
| 2011-10-26 | Quartz, respirable, >1% Qtz | 0.31 | 0.32 | 0.97 | Kiln/Dryer Operator |
| 2011-08-11 | Quartz, respirable, >1% Qtz | 0.11 | 0.58 | 0.19 | Truck Driver |
| 2011-08-11 | Cristobalite, respirable | 0 | Crusher Oper/Worker | ||
| 2011-08-11 | Cristobalite, respirable | 0 | Flotation/Concentrator Oper. | ||
| 2011-08-11 | Cristobalite, respirable | 0 | Truck Driver | ||
| 2011-03-26 | Cristobalite, respirable | 0 | Flotation/Concentrator Oper. | ||
| 2011-03-26 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2011-03-26 | Quartz, respirable, >1% Qtz | 0.1 | 0.26 | 0.38 | Kiln/Dryer Operator |
| 2011-03-26 | Quartz, respirable, >1% Qtz | 0.13 | 0.39 | 0.33 | Kiln/Dryer Operator |
| 2011-03-26 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2011-03-26 | Quartz, respirable, >1% Qtz | 0.21 | 0.49 | 0.43 | Flotation/Concentrator Oper. |
| 2010-08-23 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2010-08-23 | Quartz, respirable, >1% Qtz | 0.14 | 0.22 | 0.64 | Kiln/Dryer Operator |
| 2010-08-23 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2010-08-23 | Quartz, respirable, >1% Qtz | 0.26 | 0.51 | 0.51 | Kiln/Dryer Operator |
| 2010-03-16 | Quartz, respirable, >1% Qtz | 0.2 | 0.24 | 0.83 | Bagging Operator |
| 2010-03-16 | Quartz, respirable, >1% Qtz | 0.16 | 0.25 | 0.64 | Bagging Operator |
| 2010-03-16 | Quartz, respirable, >1% Qtz | 0.14 | 0.24 | 0.58 | Bagging Operator |
| 2010-03-15 | Cristobalite, respirable | 0 | Dry Screen Plant Operator | ||
| 2010-03-15 | Quartz, respirable, >1% Qtz | 0.18 | 0.3 | 0.60 | Dry Screen Plant Operator |
| 2010-03-15 | Quartz, respirable, >1% Qtz | 0.14 | 0.3 | 0.47 | Dry Screen Plant Operator |
| 2009-03-11 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2009-03-11 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2008-01-17 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2008-01-17 | Quartz, respirable, >1% Qtz | 0.19 | 0.25 | 0.76 | Kiln/Dryer Operator |
| 2008-01-17 | Cristobalite, respirable | 0 | Kiln/Dryer Operator | ||
| 2007-05-16 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2007-05-10 | Quartz, respirable, >1% Qtz | 0.23 | 0.59 | 0.39 | Drill Helper |
| 2006-09-20 | Quartz, respirable, >1% Qtz | 0.16 | 0.19 | 0.84 | Crusher Oper/Worker |
| 2006-08-09 | Quartz, respirable, >1% Qtz | 0.18 | 0.19 | 0.95 | Bagging Operator |
| 2004-12-08 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2004-12-08 | Quartz, respirable, >1% Qtz | 0.15 | 0.16 | 0.94 | Dry Screen Plant Operator |
| 2004-07-29 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2004-07-29 | Respirable dust, <.1mg | 0 | Kiln/Dryer Operator | ||
| 2004-03-24 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2003-05-22 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2003-05-22 | Quartz, respirable, >1% Qtz | 0.48 | 0.61 | 0.79 | Kiln/Dryer Operator |
| 2002-11-20 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2002-11-20 | Quartz, respirable, >1% Qtz | 0.22 | 0.26 | 0.85 | Ball Mill Operator |
| 2002-11-20 | Respirable dust, <.1mg | 0 | Electrician | ||
| 2002-04-30 | Respirable dust, <.1mg | 0 | Bagging Operator | ||
| 2002-04-30 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2002-01-29 | Quartz, respirable, >1% Qtz | 0.51 | 0.67 | 0.76 | Kiln/Dryer Operator |
Muestras de área (aire de molino y taller)
Última medición: 2002-11-20, hace 23 añosVer los análisis individuales (7)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Área muestreada |
|---|---|---|---|---|---|
| 2002-11-20 | Quartz, respirable, >1% Qtz | 3.18 | MP DRY SCREENING | ||
| 2002-11-20 | Quartz, respirable, >1% Qtz | 0.23 | SF ORE PROCESSING | ||
| 2002-11-20 | Quartz, respirable, >1% Qtz | 14.15 | MP DRY SCREENING | ||
| 2002-11-20 | Quartz, respirable, >1% Qtz | 7.21 | MP DRY SCREENING | ||
| 2002-11-20 | Quartz, respirable, >1% Qtz | 0.28 | MP DRYING/ROA | ||
| 2002-11-20 | Respirable dust, <.1mg | 0 | MP BAGGING/PA | ||
| 2002-04-30 | Respirable dust, <.1mg | 0 | MP DRYING/ROA |
Lane Mtn Silica Quarry & Mill registró 2.19 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 2.19 | 2.19 | 0.000 |
| 2024 * | 4.38 | 0.00 | 0.000 |
| 2023 * | 4.42 | 4.42 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 2.27 | 2.27 | 0.000 |
| 2020 * | 2.21 | 0.00 | 0.000 |
| 2019 * | 4.30 | 4.30 | 0.000 |
| 2018 * | 2.05 | 2.05 | 0.000 |
- Lane Mountain Silica Company 1950 a 1985
- Hemphill Brothers Inc 1985 a 2013
- Lane Mt. Silica Co. 2013 al presente
| Año | Empleados |
|---|---|
| 2026 | 40 |
| 2025 | 44 |
| 2024 | 44 |
| 2023 | 42 |
| 2022 | 42 |
| 2021 | 41 |
| 2020 | 42 |
| 2019 | 42 |
| 2018 | 46 |
| 2017 | 45 |
| 2016 | 41 |
| 2015 | 40 |
| 2014 | 41 |
| 2013 | 39 |
| 2012 | 42 |
| 2011 | 40 |
| 2010 | 39 |
| 2009 | 38 |
| 2008 | 46 |
| 2007 | 41 |
| 2006 | 39 |
| 2005 | 34 |
| 2004 | 32 |
| 2003 | 23 |
| 2002 | 22 |
| 2001 | 22 |
| 2000 | 24 |
Lane Mtn Silica Quarry & Mill se ubica en Stevens County, Washington, donde la categoría minera del Censo representa el 0.6% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 26,691 | 16 | 0 | 599.5 |
| 2026 Q1 | 16,991 | 0 | 0 | 0.0 |
| 2025 Q4 | 20,710 | 14 | 1 | 676.0 |
| 2025 Q3 | 29,014 | 0 | 0 | 0.0 |
| 2025 Q2 | 25,272 | 10 | 1 | 395.7 |
| 2025 Q1 | 16,454 | 0 | 0 | 0.0 |
| 2024 Q4 | 19,298 | 5 | 1 | 259.1 |
| 2024 Q3 | 27,100 | 0 | 0 | 0.0 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 27,206 | 4 | 1 | 147.0 |
| 2024 Q1 | 17,674 | 5 | 0 | 282.9 |
| 2023 Q4 | 20,795 | 0 | 0 | 0.0 |
| 2023 Q3 | 27,364 | 0 | 0 | 0.0 |
| 2023 Q2 | 23,877 | 19 | 1 | 795.7 |
| 2023 Q1 | 18,454 | 0 | 0 | 0.0 |
| 2022 Q4 | 19,436 | 7 | 1 | 360.2 |
| 2022 Q3 | 27,067 | 0 | 0 | 0.0 |
| 2022 Q2 | 25,273 | 2 | 0 | 79.1 |
| 2022 Q1 | 16,812 | 0 | 0 | 0.0 |
| 2021 Q4 | 20,345 | 4 | 1 | 196.6 |
| 2021 Q3 | 26,040 | 0 | 0 | 0.0 |
| 2021 Q2 | 25,007 | 2 | 0 | 80.0 |
| 2021 Q1 | 16,888 | 5 | 1 | 296.1 |
| 2020 Q4 | 21,707 | 0 | 0 | 0.0 |
| 2020 Q3 | 27,010 | 0 | 0 | 0.0 |
| 2020 Q2 | 24,232 | 1 | 0 | 41.3 |
| 2020 Q1 | 17,600 | 0 | 0 | 0.0 |
| 2019 Q4 | 22,366 | 2 | 1 | 89.4 |
| 2019 Q3 | 27,498 | 2 | 2 | 72.7 |
| 2019 Q2 | 25,089 | 2 | 0 | 79.7 |
| 2019 Q1 | 18,009 | 3 | 0 | 166.6 |
| 2018 Q4 | 22,930 | 0 | 0 | 0.0 |
| 2018 Q3 | 29,067 | 0 | 0 | 0.0 |
| 2018 Q2 | 25,996 | 5 | 0 | 192.3 |
| 2018 Q1 | 19,607 | 0 | 0 | 0.0 |
| 2017 Q4 | 20,646 | 1 | 0 | 48.4 |
| 2017 Q3 | 28,826 | 0 | 0 | 0.0 |
| 2017 Q2 | 24,717 | 9 | 1 | 364.1 |
| 2017 Q1 | 26,762 | 0 | 0 | 0.0 |
| 2016 Q4 | 19,551 | 3 | 0 | 153.4 |
| 2016 Q3 | 27,013 | 0 | 0 | 0.0 |
| 2016 Q2 | 24,962 | 1 | 0 | 40.1 |
| 2016 Q1 | 16,092 | 5 | 2 | 310.7 |
| 2015 Q4 | 19,234 | 7 | 1 | 363.9 |
| 2015 Q3 | 23,647 | 0 | 0 | 0.0 |
| 2015 Q2 | 25,194 | 3 | 0 | 119.1 |
| 2015 Q1 | 15,328 | 4 | 1 | 261.0 |
| 2014 Q4 | 18,434 | 0 | 0 | 0.0 |
| 2014 Q3 | 27,364 | 2 | 0 | 73.1 |
| 2014 Q2 | 24,385 | 0 | 0 | 0.0 |
| 2014 Q1 | 15,489 | 1 | 1 | 64.6 |
| 2013 Q4 | 17,908 | 0 | 0 | 0.0 |
| 2013 Q3 | 26,929 | 3 | 0 | 111.4 |
| 2013 Q2 | 23,497 | 4 | 0 | 170.2 |
| 2013 Q1 | 14,263 | 0 | 0 | 0.0 |
| 2012 Q4 | 17,396 | 0 | 0 | 0.0 |
| 2012 Q3 | 26,517 | 0 | 0 | 0.0 |
| 2012 Q2 | 24,039 | 6 | 3 | 249.6 |
| 2012 Q1 | 15,466 | 0 | 0 | 0.0 |
| 2011 Q4 | 18,725 | 2 | 1 | 106.8 |
| 2011 Q3 | 28,769 | 5 | 1 | 173.8 |
| 2011 Q2 | 24,606 | 1 | 0 | 40.6 |
| 2011 Q1 | 14,763 | 5 | 1 | 338.7 |
| 2010 Q4 | 17,751 | 0 | 0 | 0.0 |
| 2010 Q3 | 26,537 | 7 | 4 | 263.8 |
| 2010 Q2 | 21,458 | 0 | 0 | 0.0 |
| 2010 Q1 | 12,808 | 10 | 1 | 780.8 |
| 2009 Q4 | 14,776 | 0 | 0 | 0.0 |
| 2009 Q3 | 26,601 | 0 | 0 | 0.0 |
| 2009 Q2 | 22,301 | 0 | 0 | 0.0 |
| 2009 Q1 | 14,193 | 2 | 0 | 140.9 |
| 2008 Q4 | 17,652 | 5 | 0 | 283.3 |
| 2008 Q3 | 28,517 | 1 | 0 | 35.1 |
| 2008 Q2 | 25,168 | 36 | 11 | 1430.4 |
| 2008 Q1 | 14,505 | 9 | 3 | 620.5 |
| 2007 Q4 | 17,546 | 0 | 0 | 0.0 |
| 2007 Q3 | 26,352 | 0 | 0 | 0.0 |
| 2007 Q2 | 22,643 | 16 | 5 | 706.6 |
| 2007 Q1 | 14,282 | 0 | 0 | 0.0 |
| 2006 Q4 | 16,052 | 0 | 0 | 0.0 |
| 2006 Q3 | 22,061 | 2 | 0 | 90.7 |
| 2006 Q2 | 19,889 | 0 | 0 | 0.0 |
| 2006 Q1 | 11,996 | 0 | 0 | 0.0 |
| 2005 Q4 | 14,895 | 1 | 0 | 67.1 |
| 2005 Q3 | 20,356 | 0 | 0 | 0.0 |
| 2005 Q2 | 16,158 | 10 | 4 | 618.9 |
| 2005 Q1 | 10,514 | 0 | 0 | 0.0 |
| 2004 Q4 | 12,553 | 14 | 0 | 1115.3 |
| 2004 Q3 | 18,210 | 9 | 3 | 494.2 |
| 2004 Q2 | 17,286 | 0 | 0 | 0.0 |
| 2004 Q1 | 11,339 | 17 | 4 | 1499.3 |
| 2003 Q4 | 11,311 | 0 | 0 | 0.0 |
| 2003 Q3 | 12,586 | 0 | 0 | 0.0 |
| 2003 Q2 | 12,426 | 3 | 0 | 241.4 |
| 2003 Q1 | 10,969 | 11 | 4 | 1002.8 |
| 2002 Q4 | 10,437 | 0 | 0 | 0.0 |
| 2002 Q3 | 11,563 | 0 | 0 | 0.0 |
| 2002 Q2 | 11,608 | 13 | 4 | 1119.9 |
| 2002 Q1 | 10,094 | 9 | 5 | 891.6 |
| 2001 Q4 | 10,041 | 0 | 0 | 0.0 |
| 2001 Q3 | 11,664 | 10 | 4 | 857.3 |
| 2001 Q2 | 11,914 | 0 | 0 | 0.0 |
| 2001 Q1 | 9,598 | 0 | 0 | 0.0 |
| 2000 Q4 | 9,606 | 0 | 0 | 0.0 |
| 2000 Q3 | 12,269 | 0 | 0 | 0.0 |
| 2000 Q2 | 12,675 | 0 | 0 | 0.0 |
| 2000 Q1 | 11,091 | 2 | 2 | 180.3 |
Incidentes reportables
51 en archivo2026 · 2 incidentes
Mid-shift truck did hour-long regen burn. Bad smell caused headache. Soon afterward another burn started up. This time threw up. Finished shift in another truck then went to ER.
2025 · 1 incidente
Crusher operator received a deep laceration from a metal plate on their left, inside forearm while routine cleaning. Operator was transported by EMTs to hospital and received stitches.
2024 · 2 incidentes
Employee wearing a welding hood while grinding metal, received metal flakes onto eye.
Exposed to noise in work area(s). STS reported after annual audiometric testing.
2023 · 2 incidentes
Employee's age and health. Pain was immediate and continuous.
Employee's ring caught by shoekicker when slowing down rotar in motion.
2021 · 1 incidente
Chemical room was being washed with water from hose. The floor was sanded but ramp was not. The right foot slipped on ice while the left foot was stable on the sanded floor. EE did the splits.
2020 · 1 incidente
Employee was replacing worn out return roller. Item fell and the sharp edge cut through glove.
2019 · 2 incidentes
Truck driver struck by falling rock.
While exiting truck, slipped on step & pulled muscle in lower back. *Employee did not report injury - notified us 9/16/19.
2018 · 1 incidente
The loader made a sudden stop after EE hit a sub-terrain rock. EE's body was jarred from the incident.
2017 · 2 incidentes
While removing a worn plate ee lacerated finger. EE was holding a sharp spot on the metal. Also, ee was wearing leather gloves.
Employee stained back while lifting a corner of 4X8 sheet of metal.
2016 · 2 incidentes
Lifting and moving a large sheet of metal. Strained back and right shoulder.
Strained lower back while lifting & opening a frozen rail car lid.
2013 · 4 incidentes
Stepped on rock and twisted left knee. He was stepping off the loader.
While working on a maintenance item the item fell. EE reached for the item and this is when the torch burned his left arm.
The cutting edge was being removed from the loader bucket. The impact wrench twisted the bolt, which was being held by his hand. The sharp edge of the bolt cut his hand - requiring stitches and glue.
While removing the cutting edge off the loader bucket, the cutting edge fell to the floor and came in contact with a bolt which blew up and hit employee in the face cutting his lip. There was support under the bucket as well as the cutting edge.
2012 · 4 incidentes
EE was walking near the maintenance shop when he slipped and fell on the ice, which wasn't visible with snow cover.
When disposable box cutter handle broke it cut through leather gloves & right hand.
When installing chain onto sprocket, release of stored energy from bound-up chain caught middle finger on right hand. His reaction of pulling hand away tore off finger nail.
Climbed down from truck and stepped on rock, twisting right leg. We were not told he had gone to Doctor. First knowledge of incident 6/15/12.
2011 · 4 incidentes
While ascending ladder on railcar, the safety harness/lanyard being worn swung around his left side and hit him in the mouth which broke off his capped tooth.
Employee was wearing welding helmet. He was welding gripper to drill then metal piece hit right eye.
He was barring and jack hammering frozen sand chunks. Claim original injury 2/27/11 but did not go to doctor til 4/1/11.
He was disconnecting a rubber hose with a utility knife when he accidentally cut the top of his left hand.
2010 · 4 incidentes
Slipped on ice while getting into pick up, he grabbed door jam with arm and hands. Hurt his elbow. Slipped on ice 11/27/10, went to doctor 12/8/2010.
Cut left ring finger on sharp edge of square tube iron while putting away inventory.
Airborne particle entered and scratched right eye
EE was striking kicker with hammer when metal dislodged from kicker, passed through his glove, then imbedded into his left hand.
2009 · 4 incidentes
Cut right index finger with knife while retrieving falling board.
Left eye injury from using grinder.
Hurt his back while changing a pump.
Employee of Lane MTN. slipped on ice and fell breaking bones/dislocating ankle.
2008 · 3 incidentes
Exposed to noise in work area throughout 16 years.
Changing drill stems on drill over the course of many years with this company as well as his own.
Employee slipped on ice climbing onto loader-fell with fist hitting his right cage.
2003 · 1 incidente
SILICOSIS.
1994 · 3 incidentes
HE WAS CLEANING THE CONVEYOR BELT, TURNING IT BYHAND, WHEN HIS FINGERS WAS CAUGHT IN THE PULLEY.
HE WAS COMING DOWN SOME STEPS, WHEN HE MISSED ONE AND TRIED TO CATCH HIMSELF AND IT TWISTED HIS BACK.
HE WAS KNEELING DOWN TO REPAIR THE GEAR BOX ON THE ELEVATOR, WHEN THE GEAR BOX BROKE LOOSE, HITTING HIM.
1993 · 1 incidente
JACK SLIPPED BACKWARDS. JACK HANDLE CAUGHT FINGER BETWEEN HANDLE AND WORK BENCH.
1991 · 1 incidente
HE WAS INSTALLING ANEW SCREEN ON CRUSHER AND REMODELING FEED SCHUTE TO CONE, WHEN HE SLIPPED AND FELL APPROX. 3 FEET TO GROUND.
1990 · 1 incidente
USING A CUTTING TORCH,IT BLEW UP BURNING RIGHT HAND.
1989 · 1 incidente
WHILE BACKING DOWN RAMP, HE HIT A BUMP, HURTING HIS BACK NECK AND SHOULDERS.
1988 · 2 incidentes
HE WAS PRYING ON A ROCK WITH A BAR WHEN BAR SLIPPE D HITTING HIM ON THE HEAD
HE JUMPED FROM THE BALL MILL INTO A PILE OF LOOSE SAND, ABOUT A 3' DROP. THE JUMP CAUSED BACK PAIN. WILL BE SCHEDULED FOR SURGERY ON OCT. 5, 1988.
1987 · 1 incidente
HE WAS LIFTING 100LBS SACKS WHEN HE SPRAINED HIS BACK.
1985 · 1 incidente
HE WAS PUTTING A MOP HEAD ON TOP OF A MOTOR AND HE GOT HIS HAND CAUGHT INTO ONE OF THE PULLEYS AND IT TORE OFF PART OF THE ENDOF THE MIDDLE FINGER