Granite Falls Quarry: 20 citaciones de la MSHA Metal/Non-Metal

EMPLOYEE WAS IN THE PROCESS OF REMOVING THE FUEL TANK ON A 980-C CAT FRONT END LOADER. THE TANK FELL PINNING EMPLO9YEE ON THE GROUND BETWEEN THE GROUND AND THE LADDER HE WAS STANDING ON WITH S OME OF THE WEIGHT OF THE FUEL TANK ON THE LADDER

NO EXACT DESCRIPTION CAN BE MADE, OR AN EXACT INJURY DATE.

UTILITY KNIFE SLIPPED WHILE CUTTING CONVEYOR BELT AND STRUCK EE IN THE LEG JUST ABOVE THE RIGHT KNEE.

EMPLOYEE WAS WALKING ON THE GROUND FROM CRUSHERS3 AND 4 TOWARDS TOWER #2, WHEN HE TWISTED HIS ANKLE. THE AREA AROUND WHERE HE WAS WALKING WAS CLEAR OF DEBRIS.

EE WAS WALKING UP TO A STAIRWAY AND STEPPED ON AROCK AND TWISTED/SPRAINED HIS RIGHT KNEE.

EE WAS TORCHING OFF A BEARING RACE ON A SHAFT. APIECE OF SLAG ENTERED THE BOTTOM OF THE TONGUE AREA OF HIS BOOT, BURNING THE TOP OF THE FOOT ANDBETWEEN THE 3RD & 4TH TOES.

EMPLOYEE WAS TIGHTENING A BOLT WHEN THE WRENCH SLIPPED OFF AND EMPLOYEE FELL BACK AND HIT HAND ON GUARDRAIL.

WORKING ON SCREEN DECK WEHN DUST FELL INTO EYE.

FELL ON LEFT THUMB WHEN REACHING TO GRAB STEEL PLATE.

GRINGING METAL WITH AIR GRINDER, A PIECE FLEW OFF AND CAME UNDER FACE SHIELD AND GLASSES LODGING IN RIGHT EYE.

EE WAS TAPPING A TROUGHING ROLLER WITH A HAMMER TO FREE IT, WHEN HE SWUNG WITH BACK SWING THE NEXT ROUGH UP CAUGHT THE HAMMER, TWISTING HIS ARM.

WAYNE WAS PICKING UP A LARGE ROCK WITH SOMEONE ELSE AND WHEN THEY WERE SETTING IT DOWN IT LANDED ON HIS FINGER.

WAS WIPING OFF CRUSHER #4 WITH HAND AND A PIECE OF RUST FELL INTO LEFT EYE.

EE SLIPPED AND FELL ON A PILE OF ROCKS LANDING ON HIS ABDOMEN.

EE WAS USING HAND SHOVEL TO CLEAN MATERIAL SPILLAGE WHEN MUSCLE IN LEFT ELBOW STARTED HURTING. NO LOST TIME.

FOREMAN WAS SHOWING EE WHAT JOB TO DO NEXT. AS EE TURNED TO RETURN TO LOADER HE TRIPPED ON A ROCK FALLING TO THE GROUND. AS HE FELL HE PUT OUT HIS HAND TO CATCH HIS FALL. HIS HAND STRUCK A ROC K CAUSING A CUT ON THE LEFT INSIDE WRIST. STITCHES WERE REQUIRED.

DIVERTER 1A ON TOWER #1 WAS PLUGGED WITH ROCKS IN THE CHUTE INTO CRUSHER #2. EE REACHED INTO CHUTE TO DISLODGE A ROCK INSTEAD OF USING BAR WHICHWAS PROVIDED, AS HE REACHED IN A ROCK FELL ON HI S RIGHT HAND FRACTURING HIS RING FINGER.

EE WENT TO TOWN IN HIS PERSONAL PU. ON THE WAY BACK EE HAD A WRECK, HITTING A TREE. EE DIDN'T EVEN PUNCH IN HIS TIME CARD FOR THE SHIFT.

EE WAS CUTTING CROWN RUBBED TO LENGTH. AS HE WAS CUTTING THE RUBBER, HE FAILED TO REMOVE HIS FINGER FROM PATH OF KNIFE BLADE. THE RESULT OF WHICH CAUSED A CUT BETWEEN THUMB AND 1ST FINGER ON L EFT HAND.

EMPLOYEE WAS INSTALLING A NEW CONVEYOR PULLEY AND WHILE POSITIONING IT HE FELT PAIN IN HIS LOWER BACK EMPLOYEE HAS COMPLAINED NUMEROUS TIMES IN THE PAST AND WAS NOT WEARING BACK BELT AT THE TI ME OF ACCIDENT.

GRAPPLE OPERATOR WAS LOADING ROCKS FROM UNER THE SCALPER A ROCK CAME ACROSS THE SCALPER & WHEN FALLING INTO PILE A PORTION OF THE ROCK BROKE OFF & STRUCK THE OPERATOR UNDER THE LEFT EYE

EMPLOYEE COULD NOT TELL HOW OR WHEN ACCIDENT OCCURRED. HE STATED THAT HIS ARM WAS HURTING WHEN HE WOKE UP IN THE MORNING. EMPLOYEE GREASE'S CHANGES, FILER ETC.

EMPLOYEE WAS DOING MAINTENANCE WORK ON THE BOBCAT. EMPLOYEE CLAIMS HE WAS LAYING IN MACHINE WITH HIS ARM IN THE FINAL DRIVE WHEN HE FELT PAIN IN HIS NECK. EMPLOYEE STATES THAT HE WAS IN AN AWK WARD POSITION.

EMPLOYEE WAS USING A 12LB SLEDGE TO HAMMER A PUNCH THROUGH A PIECE OF RUBBER BELTING TO HANG BELT IN THE SCALPER. THE SLEDGE MISSED THE PUNCH AND SQUARCH, HIT THE THUMB AND INDEX FINGER OF H IS LEFT HAND.

LLEANED UP TO JACKS WITH HAND UNDER I BEAM USED JACKS I BEAM SLIGHTLY STACK ASND WHEN BUMPED IT DROPPED ON FINGER

EMPLOYEE WAS WORKING ON CONVEYOR DOING SOME CUTTING WHEN HE PUT HIS ARM ON A HOT SPOT.

THE EMPLOYEE WAS OPERATING THE JAY DRILL AT THE TIME OF THE ACCIDENT. THE OPERATOR HAD INCREASED THROTTLE ON THE COMPRESSOR WHEN THE DRILL STARTED TO BACKUP AND JACK KNIFED. THE OPERATOR TRI ED TO SHORT CUT BETWEEN THE COMPRESSOR AND THE DRILL TO ADJUST THE PROPELL LEVER. WHEN CROSSING BETWEEN THE EUQIPMENT THE EMPLOYEES FOOT WAS TRAPED BETWEEN THE DRILL TRACK AND THE COMPRESSOR

I.NAME SAID HE CLIMBED DOWN THE BANK OFF OF THE 700 LEVEL TO LOOK FOR SOME BULL HOSE. ON HIS WAY BACK UP HE ROLLED OFF A ROCK AND THREW OUT HIS HIP.

EMPLOYEE WAS HA4MERING A SCREEN TIGHTENING WEDGE IN PLACE WHEN THE WEDGE BROKE & A PIECE OF THE WEDGE LODGED UNDER THE SKIN OF THE EMPLOYEES FOREHEAD

EMP WAS GRINDIN1 WITH A DISC GRINDER, THE DISC CAUGHT THE METAL AND KICKED BACK, CUTTING THE WIRXX WRIST OF THE OPERATOR

EMPLOYEE WAS US3NG A CUTTING TORCH AND ACCIDENTALLY BURNED HIS THUMB WHEN A HOSE RUPTURED.

THE EMPLOYEE WA8 WALKING DOWN THE ROCK SLOPE. HE ACCIDENTALLY DISLODGED SMALL ROCKS FROM UNDER A LARGE ROCK, CAUSING THE LARGE ROCK TO ROLL APPROX. 8 INCHES, PINNING THE EMPLOYEE'S LEGS AND HI PS UNDER THE LA9GE ROCK.

HE WAS PUTTING 5 TAILPULLY COVER BACK ON AND THESIDE PLATE DIMOND PLATE STEEL CUT HIS RIGHT INDEX FINGER.

TESTING VOLTAGE3IN ELECTRICAL CONTROL TRAILER A SHORT ARCED BURNING BOTH HANDS AND FACE.

HEAVY SNOW CAUSED TREES TO FALL INTO ROAD, 966 LOADER WAS CLEANING ROAD, SMALL OLDER TREE BROKE, FLEW UP & STRUCK EE ON FOREHEAD.