Bromley Lakes: 157 citaciones de la MSHA Metal/Non-Metal

Employee was welding, when welding the employee received flash burn to both eyes from another welder in the same area. The employee reported the flash burn 16 hours later, we are not exactly sure on the time of exposure.

On 10/16/12, EE was exiting the cat skid steer. Upon exiting, EE hit her shin on the cab which possibly cause here to slip. EE reported the accident to another EE on 10/23/12. On 10/24/12 EE showed me how she thought she may have hurt her thumb-wrist area-EE was taken to the doctor where she was given a brace-she was cleared to return to her full duty as an operator.

Employee was in a sited position (sitting Indian Style) as he rose he felt a large pop in his left knee.

Injured was stepping over the tailgate of his pickup truck, he placed his left foot on the bumper of the truck and his left hand on top at the tailgate. He swung his right leg over the tailgate. His left foot slipped off the bumper causing him to fall on his left side.

EE was steering the loader, he turned the wheel counter clock wise and felt a sharp pain in his left shoulder.

Employee was cleaning up scrap steel and putting the steel in back of a pick-up truck. The piece in his hand slipped, cutting his wrist.

EE was adjusting the CB antenna, as he walked back across the walkway of the loader, he tripped over a shovel that was laying on the walkway, lost his balance and hit his knee on the hood handle.

EE STEPPED DOWN FROM A CONVEYOR FRAME TO THE TRUCK BODY. AS HE TRANSFERRED HIS WEIGHT FROM ONE LEG TO THE OTHER LEG HE FELT A SHARP PAIN IN HIS RIGHT LOWER BACK.

EE NOTIFIED PLANT MANAGER DURING LUNCH PERIOD THAT HIS LOWER BACK WAS HURTING. SORE BACK - NOTHING SERIOUS & FINISHED SHIFT OPERATING A HITACHI EX300 BACKHOE-EXCAVATOR. NEXT MORNING WED. JULY 17 BACK WAS STILL SORE. REQUESTED TO SEE DOCTOR. SENT TO DOCTOR.

EMPLOYEE WAS HELPING DISMANTLE AND MOVE 36" FIELD TRUSS/CONVEYOR TO ANOTHER PART OF PIT. A HYDRAULIC CRANE WAS LIFTING 60' SECTIONS OF CONVEYOR. TAG LINES WERE ATTACHED. AS THE CONVEYOR WAS LI FTED THE CONVEYOR SWUNG AROUND TOWARD EMPLOYEE. EMPLOYEE MOVED OUT OF THE WAY QUICKLY SPRAINING RIGHT KNEE.

EE WAS RESETTING E STOP (SAFETY SWITCH) AFTER CONVEYOR HAD STOPPED. HE WAS PULLING HIMSELF UP ON CONVEYOR FRAME AND SLIPPED, AND FELL INTO SKID LOADER BUCKET THAT WAS BELOW HIM. CONVEYOR WAS 3 -4' OFF GROUND.

EE WAS ENTERING LUNCH ROOM DOOR TO EAT AND WIND WAS BLOWING STRONGLY. HE GRABBED THE OUTSIDE OF THE DOOR TO CLOSE IT WITH HIS LEFT HAND AND THE WIND BLEW IT SHUT STRIKING HIS LEFT MIDDLE FINGE R BETWEEN THE METAL DOOR AND METAL DOOR JAM BROKEN FINGER.

EE WAS WALKING DOWN SLOPED CATWALK GRATED. WHICH WAS FREE OF SNOW & ICE BUT WAS SLICK WITH FROST, & SLIPPED & FELL STRIKING LEFT WRIST.

EMPLOYEE WAS ROLING UP A 50' EXTENSION CORD AFTER USING AND WHEN HE WAS AT THE END OF THE CORD THE 3-PRONGED PLUG IN STRUCK HIM IN THE LEFT EYE.

EMPLOYEE WAS CHANGIGN TIMING SHEAVE ON VIBRATING SCREEN ADN WHILE ASSEMBLING PULLEY DROPPED STRIKING EMPLOYEES FINGER.

EMPLOYEE WAS WALKING DOWN STEEL GRATED STEPS AND ONE WAS PARTIALLY DISCONNECTED AND LOOSE FROM FRAME. HE STEPPED DOWN AND HE SLIPPED AND FELL ON HIS BACK. THERE WAS NO VISIBLE INJURY, BU THE W AS SENT TO THE DOCTOR AND HAD A MILD CONTUSION ON THE BACK.

CUTTING RUBBER LINER, CUT MYSELF IN THE LEG.

EE WAS STANDING ON A 36" MAINLINE CONVEYOR 3-6' ABOVE GROUND LEVEL & LOST HIS BALANCE. IN TRYING TO AVOID FALL HE SLIPPED AND FELL SPRAINING HIS RIGHT ANKLE.

EMPLOYEE WAS TRIMMING A 36" CONVEYOR BELT WITH STANLEY BELT KNIFE. THE KNIFE SLIPPED AND CUT HIS LEFT INDEX FINGER.

EMPLOYEE WAS TAKING OFF A FUEL FILTER WHEN THE LINE CAME OFF AND GAS SHOT ALL OVER. GOT GAS IN BOTH EYES. HE WAS WEARING SSAFETY GLASSES.

EE WAS CUTTING 3/4" SKIRTING RUBBER WITH STANLEYBELT KNIFE. HE WAS HOLDING RUBBER DOWN WITH RIGHT ARM & THE KNIFE SLIPPED & THE BLADE PUNCTURED HIS RIGHT LOWER FOREARM.

THE MPLOYEE WAS STANDING IN THE PLANT AREA AND NOTICED THAT SOME FOREIGN OBJECT HAD BLOWN INTO HIS LEFT EYE.AFTER THOROUGHLY WASHING HIS EYE WITH EYE SOLUTION THE OBJECT WAS STILL THERE.HE WEN T TO A DOCTOR THAT REMOVED A SMALL FLAKE OF METAL.

EE WAS USING A HAMMER HITTING A BEARING TO FORCE IT ONTO A SHIAFT. HE MISSED THE BEARING AND HIT HIS LEFT THUMB WITH THE HAMMER.

INJURED SAID THAT HE WAS PICKING MUD OFF OF A CONVEYOR BELT AND ALL OF A SUDDEN HE GOT A PAIN IN HIS LOWER BACK AND LEFT LEG.

EE SAID THAT WHILE HE WAS SHOVELING NEAR SQUEEZE CONVEYOR 3 HE HIT HIS LEFT HAND ON THE CONVEYOR FRAMS. THE CONVEYOR WAS NOT RUNNING AT THE TIME OF THE ACCIDENT.

INJURED AND EMPLOYEE WERE LIFTING A SHAFT. THE SHAFT SLIPPED AND SLID APPROX ON EFOOT ALONG A CATWALK HITTING INJURED ON THE RIGHT ANKLE.

HE SAID THAT HE WOKE UP IN HIS MORNING (4-14-94) AND HIS LOWER BACK HURT. HE SAID THAT HE DID NOT FALL, HAVE ANYTHING FALL ON HIM OR HIT HIS BACK OR ANY OTHER PART OF HIS BODY ON ANYTHING.

EE SLIPPED AND FELL APPROX. 10 FT TO THE GROUND WHILE WALKING ON A CONVEYOR BELT WHICH IS A VIOLATION OF CO POLICY CO WORK RULES. AT THE TIME OF THE ACCIDENT WORK WAS BEING DONW ON THE TAIL PU LLEY OF THIS CONVEYOR WHICH IS AT GROUND LEVEL. WHEN HE WAS ASKED WHY HE WAS ON THE CONVEYOR HE STATED ID ONT KNOW WHY I WAS UP THERE POST ACCIDENT DRUG SCREENING WAS POSITIVE FOR COCAINE MET

PATIENT ALLEGES HE TRIPPED OVER CENTER BLOCK AND INJURED HIS LEFT WRIST.

CLAIMANT JUMPED FROM A CONVEYOR & TWISTED HIS BACK

CLAIMANT SLIPPED AND FELL ON METAL STEPS.

CLAIMANT WAS WORKING ON A JAW CRUSHER, TOGGLE PLATE SLIPPED AND CAUGHT HIS HAND AND ARM. THE INJURY WAS BRUISING.

EMPLOYEE ALLEGES HE SLIPPED ON ICE, FELL BACKWARD AND HIS HAND STRUCK AN IRON BEAM.

SLIPPED ON SNOW ON STEPS TO TRAILER AND FELL ON STEP ON HIS ARM.

SLIPPED & FELL AGAINST CONVEYOR BRUISING RIGHT ELBOW.

EMPLOYEE WAS WELDING CRUSHER HE SLIPPED & FELL

EMPLOYEE WAS NOTCHING A BOARD WITH A POCKET KNIFE, KNIFE SLIPPED CUTTING FINGER.

WHILE LOCKING UP THE PIT SCALE HOUSE THE CLERK EITHER SLIPPED OR LOST HER BALNCE, FALLING OFF THE STEPS AND LANDING ON CONCRETE.

STRAINED LOWER BACK LIFTING BELT FROM BACK OF PICKUP TRUCK

EMPLOYEE ALLEGES THAT WHILE GETTING INTO CAB OD LOADER,HE SLIPPED AND FELL TO GROUND.

EMPLOYEE ALLEDGED THAT AS HE LIFTED UP A CAST IRON PIPE TO PUT A BRICK UNDER IT, HE FELT A PAIN IN HIS BACK.

EMPLOYEE WAS USING POCKET KNIFE TO CUT A HOLE IN A BELT. HE ALLEGES THE KNIFE FOLDED, CUTTING THE OUTSIDE OF KNUCKLE ON RIGHT PINKY FINGER. EMPLOYEE WAS NOT AWARE UNTIL 2-9-89 THAT INJURED EMP LOYEE RECEIVED STITCHES.

EMPLOYEE ALLEGES HE WAS HOLDING REBAR FOR WELDING & TURNED & GLANCED AT THE WELDING PERFORMED THUS BURNING EYES