EE was replacing tram-cylinder on HP4 cone and got EE's thumb pinched between the cylinder and cone, resulting in laceration/partial amputation of the left thumb.
Brookman Quarry Metal/Non-Metal
Brookman Quarry tiene $142K en multas propuestas de MSHA y $993 pendientes en 20 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Brookman Quarry.
- Muertes
- 0
- Incidentes totales
- 20
- Años en registro
- 1989–2026
- Último incidente
- May 2026
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Brookman Quarry tiene $142K en multas propuestas de MSHA y $993 pendientes en 20 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 12,504 | 1 | 0 | 80.0 |
| 2025 Q3 | 12,715 | 0 | 0 | 0.0 |
| 2025 Q2 | 13,068 | 0 | 0 | 0.0 |
| 2025 Q1 | 9,504 | 0 | 0 | 0.0 |
| 2024 Q4 | 5,376 | 0 | 0 | 0.0 |
| 2024 Q3 | 4,787 | 2 | 1 | 417.8 |
| 2024 Q2 | 4,438 | 0 | 0 | 0.0 |
| 2024 Q1 | 3,620 | 1 | 0 | 276.2 |
Mostrar 93 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q4 | 2,905 | 0 | 0 | 0.0 |
| 2023 Q3 | 3,523 | 1 | 0 | 283.8 |
| 2023 Q2 | 4,166 | 0 | 0 | 0.0 |
| 2023 Q1 | 5,435 | 1 | 0 | 184.0 |
| 2022 Q4 | 5,049 | 0 | 0 | 0.0 |
| 2022 Q3 | 8,721 | 0 | 0 | 0.0 |
| 2022 Q2 | 6,334 | 0 | 0 | 0.0 |
| 2022 Q1 | 6,840 | 1 | 0 | 146.2 |
| 2021 Q4 | 6,058 | 0 | 0 | 0.0 |
| 2021 Q3 | 7,091 | 2 | 2 | 282.0 |
| 2021 Q2 | 7,025 | 0 | 0 | 0.0 |
| 2021 Q1 | 7,173 | 1 | 1 | 139.4 |
| 2020 Q4 | 6,028 | 0 | 0 | 0.0 |
| 2020 Q3 | 7,011 | 2 | 1 | 285.3 |
| 2020 Q2 | 6,823 | 5 | 2 | 732.8 |
| 2020 Q1 | 7,322 | 0 | 0 | 0.0 |
| 2019 Q4 | 5,490 | 0 | 0 | 0.0 |
| 2019 Q3 | 7,968 | 3 | 0 | 376.5 |
| 2019 Q2 | 5,710 | 0 | 0 | 0.0 |
| 2019 Q1 | 5,902 | 3 | 1 | 508.3 |
| 2018 Q4 | 4,408 | 0 | 0 | 0.0 |
| 2018 Q3 | 7,710 | 5 | 0 | 648.5 |
| 2018 Q2 | 7,663 | 1 | 0 | 130.5 |
| 2018 Q1 | 7,698 | 4 | 1 | 519.6 |
| 2017 Q4 | 6,994 | 0 | 0 | 0.0 |
| 2017 Q2 | 12,626 | 2 | 0 | 158.4 |
| 2017 Q1 | 10,013 | 2 | 1 | 199.7 |
| 2016 Q4 | 3,577 | 0 | 0 | 0.0 |
| 2016 Q3 | 13,175 | 0 | 0 | 0.0 |
| 2016 Q2 | 16,007 | 4 | 3 | 249.9 |
| 2016 Q1 | 14,182 | 0 | 0 | 0.0 |
| 2015 Q4 | 16,219 | 2 | 1 | 123.3 |
| 2015 Q3 | 18,857 | 7 | 1 | 371.2 |
| 2015 Q2 | 18,049 | 0 | 0 | 0.0 |
| 2015 Q1 | 16,113 | 0 | 0 | 0.0 |
| 2014 Q4 | 17,467 | 0 | 0 | 0.0 |
| 2014 Q3 | 18,317 | 2 | 1 | 109.2 |
| 2014 Q2 | 15,387 | 0 | 0 | 0.0 |
| 2014 Q1 | 16,185 | 0 | 0 | 0.0 |
| 2013 Q4 | 16,874 | 1 | 0 | 59.3 |
| 2013 Q3 | 15,981 | 8 | 1 | 500.6 |
| 2013 Q2 | 15,656 | 0 | 0 | 0.0 |
| 2013 Q1 | 15,382 | 8 | 0 | 520.1 |
| 2012 Q4 | 16,274 | 0 | 0 | 0.0 |
| 2012 Q3 | 15,839 | 3 | 0 | 189.4 |
| 2012 Q2 | 14,570 | 0 | 0 | 0.0 |
| 2012 Q1 | 13,986 | 5 | 1 | 357.5 |
| 2011 Q4 | 13,957 | 0 | 0 | 0.0 |
| 2011 Q3 | 14,896 | 0 | 0 | 0.0 |
| 2011 Q2 | 15,268 | 5 | 1 | 327.5 |
| 2011 Q1 | 14,036 | 3 | 2 | 213.7 |
| 2010 Q4 | 12,814 | 0 | 0 | 0.0 |
| 2010 Q3 | 8,741 | 12 | 4 | 1372.8 |
| 2010 Q2 | 7,516 | 3 | 1 | 399.1 |
| 2010 Q1 | 15,462 | 31 | 18 | 2004.9 |
| 2009 Q4 | 15,622 | 0 | 0 | 0.0 |
| 2009 Q3 | 15,742 | 3 | 1 | 190.6 |
| 2009 Q2 | 14,947 | 0 | 0 | 0.0 |
| 2009 Q1 | 15,226 | 3 | 1 | 197.0 |
| 2008 Q4 | 15,782 | 0 | 0 | 0.0 |
| 2008 Q3 | 17,010 | 3 | 1 | 176.4 |
| 2008 Q2 | 17,106 | 0 | 0 | 0.0 |
| 2008 Q1 | 17,446 | 3 | 2 | 172.0 |
| 2007 Q4 | 15,281 | 0 | 0 | 0.0 |
| 2007 Q3 | 15,882 | 3 | 0 | 188.9 |
| 2007 Q2 | 16,763 | 0 | 0 | 0.0 |
| 2007 Q1 | 17,162 | 0 | 0 | 0.0 |
| 2006 Q4 | 15,916 | 0 | 0 | 0.0 |
| 2006 Q3 | 15,336 | 0 | 0 | 0.0 |
| 2006 Q2 | 15,540 | 0 | 0 | 0.0 |
| 2006 Q1 | 13,388 | 0 | 0 | 0.0 |
| 2005 Q4 | 13,109 | 0 | 0 | 0.0 |
| 2005 Q3 | 10,934 | 0 | 0 | 0.0 |
| 2005 Q2 | 10,830 | 3 | 1 | 277.0 |
| 2005 Q1 | 10,980 | 0 | 0 | 0.0 |
| 2004 Q4 | 9,770 | 3 | 2 | 307.1 |
| 2004 Q3 | 9,398 | 0 | 0 | 0.0 |
| 2004 Q2 | 8,248 | 0 | 0 | 0.0 |
| 2004 Q1 | 6,975 | 8 | 4 | 1147.0 |
| 2003 Q4 | 7,155 | 0 | 0 | 0.0 |
| 2003 Q3 | 7,546 | 0 | 0 | 0.0 |
| 2003 Q2 | 7,740 | 5 | 3 | 646.0 |
| 2003 Q1 | 7,222 | 0 | 0 | 0.0 |
| 2002 Q4 | 7,900 | 9 | 4 | 1139.2 |
| 2002 Q3 | 9,288 | 0 | 0 | 0.0 |
| 2002 Q2 | 9,765 | 7 | 3 | 716.8 |
| 2002 Q1 | 11,777 | 0 | 0 | 0.0 |
| 2001 Q4 | 10,636 | 4 | 3 | 376.1 |
| 2001 Q3 | 13,227 | 0 | 0 | 0.0 |
| 2001 Q2 | 14,238 | 5 | 2 | 351.2 |
| 2001 Q1 | 11,993 | 2 | 0 | 166.8 |
| 2000 Q2 | 5,932 | 5 | 2 | 842.9 |
| 2000 Q1 | 6,310 | 0 | 0 | 0.0 |
Incidentes reportables
20 en archivo2026 · 1 incidente
2025 · 2 incidentes
EE was welding, and when EE finished with the rod, threw it from the holder. The rod fell into EE's boot and burned EE.
EE was loosening a drain elbow on the HP3 cone hydraulic tank. The pipe wrench EE was using slipped from the plug and EE hit their hand on adjacent beam.
2023 · 1 incidente
Employee was moving the hinge portion of the chute attached to the Simplicity shaker for the secondary plant. The amount of force used to pry the hinge portion of the chute caused the blade portion of the telehandler to jump when the piece was dislodged. The blade from the telehandler landed on the Employee's left index finger causing laceration.
2018 · 1 incidente
Employee was finishing shift and had forgotten lunch pale at break room. While walking back EE ducked underneath a conveyor belt support, EE's hard hat fell off and EE struck EE's head on steel support resulting in laceration on top of head. Ten stitches required.
2017 · 3 incidentes
Two employees including one supervisor was in the Quarry tunnel attempting to raise the gate for the tail pulley. After repeated attempts, the wall went up and jammed one employee's right hand between the pulley and the wall of the tunnel. It took about 3 minutes to pry their hand out from being squeezed.
EE and two others were working in the Tunnel in the Quarry trying to raid the gate for the tail-pulley. When it became unstuck, EE's hand got stuck between the gate and the wall. The other two rushed to help free EE's hand using a piece of 2x4 wood to pry EE's hand out. It took about 3 minutes to free EE's right hand; EE's thumb was numb.
The employee was not wearing safety goggles while dispensing grease to a Trackhoe. The hose burst and entered the eye of the employee. Employee drove to the emergency room on own due to denying assistance. No medical report was received. The employee is seeing blurry and has not returned to work.
2016 · 1 incidente
Employee was replacing a roller that goes underneath the conveyor belt #7 when employee tried to use force and pushed to flip the roller in place it slipped and became in contact with the employee's right middle finger.
2010 · 1 incidente
Employee was hammering a tooth on an excavator bucket when a piece of metal broke off and became airborn, striking employee resulting in a minor laceration to the abdomen approximately 3/8" in length
1999 · 2 incidentes
EE WAS USING A CROW-BAR TO DISLODGE A ROCK THAT WAS STUCK IN A PULLY. AS EE PULLED ON THE CROW-BAR HE LOST HIS FOOTING CAUSING THE CROWBAR TO STRIKE HIM IN THE GROIN
EMPLOYEE WAS MOVING BACKWARDS PULLING A LARGE HOSE TO CONNECT TO A WATER PUMP WHEN HE TRIPPED ON SOME ROCKS ON THE GROUND AND FELL ON HIS BACK.
1998 · 1 incidente
EE WAS ASSISTING WITH REPAIRING A CONVEYOR BELT. EE WAS USING A KNIFE TO CUT THE BELT & AS HE CUT THROUGH THE BELT THE KNIFE CUT HIS RIGHT THIGH.
1997 · 1 incidente
EMP HAD USED A BLOW TORCK TO CUT OFF A PIECE FROM A FROMT END LOADER BUCKET. AS EE WAS REMOVING THE PIECE OF METAL IT STRUCK HIS FINGER AGAINST THE BUCKET.
1996 · 1 incidente
EMPLOYEE WAS WORKING NEAR A CONVEYOR BELT THAT WAS MOVING ROCKS TO A ROCKPILE. A ROCK BOUNCED OFF THE CONVEYOR AND STRUCK EMPLOYEE ON THE RIGHT SHOULDER.
1995 · 2 incidentes
EMPLOYEE WAS LYING ON HIS BACK CUTTING AMETAL BAR OVER HIS HEAD IWH A TORCH. WHIEL CUTTING BAR SPARKS FLEW IN BETWEEN EMPLOYEE'S EYES AND PROTECTIVE GLASSES.
WHILE SHOVELING A MOUND OF WET DIRT IN THE QUARRY'S TUNNEL, THE SHOVEL STRUCK AN OBJECT CAUSING SHOVEL TO BOUNCE BACK STRIKING EMPLOYEE ON THE UPPER RIGHT THIGH.
1993 · 1 incidente
EMPLOYEE WAS STANDING ON A FRONT-END LOADER POURING OIL INTO THE LOADER'S ENGINE. AS EMPLOYEE STARTED TO MOVE HIS FEET TO GET DOWN FROM THE LOADER, HIS RIGHT FOOT SLIPPED AND SCRAPED AGAINST T HE SIDE OF THE LOADER.
1991 · 1 incidente
EMPLOYEE WAS STANDING ON A CONVEYOR BELT TO REMOVE TWO FLAT ROCKS THAT WERE LODGED IN A HEAD PULLEY. THE EMPLOYEE SIGNALED THE CRUSHER OPERATOR TO TURN OFF AN ADJOINING CONVEYOR SO HE COULD E VEN A LOAD OF ROCKS IN A PILE. THE CRUSHER OPERATOR MISUNDERSTOOD AND TURNED ON THE CONVEYOR ON WHICH EMPLOYEE WAS STANDING CAUSING HIM TO FALL ONTO PILE OF ROCKS.
1989 · 1 incidente
EMPLOYEE WAS ASSISTING WITH SETTING UP A CRANE BY PLACING A BLOCK OF WOOD TO SERVE AS A SUPPORT FOR THE CRANS OUTRIGGER. WHILE SETTING BLOCK IN PLACE, EMPLOYEES THUMB GOT CAUGHT BETWEEN OUTRI GGER AND THE BLOCK OF WOOD.
The full compliance file on Brookman Quarry
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.