Employee was working around the Highwall Miner when flash from welding got into his eyes.
Elm Lick Mine Coal
Elm Lick Mine tiene $308K en multas propuestas de MSHA y $22K pendientes en 3 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Elm Lick Mine.
- Muertes
- 0
- Incidentes totales
- 15
- Años en registro
- 2007–2010
- Último incidente
- Oct 2010
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Elm Lick Mine tiene $308K en multas propuestas de MSHA y $22K pendientes en 3 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Elm Lick Mine muestra un polvo respirable de carbon promedio de 0.17 mg/m3 (100% en cumplimiento) en 69 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2012 Q4 | 0 | 0 | 0 | |
| 2012 Q3 | 0 | 0 | 0 | |
| 2012 Q2 | 0 | 0 | 0 | |
| 2012 Q1 | 0 | 2 | 1 | |
| 2011 Q4 | 15,508 | 4 | 1 | 257.9 |
| 2011 Q3 | 21,671 | 0 | 0 | 0.0 |
| 2011 Q2 | 21,678 | 2 | 1 | 92.3 |
| 2011 Q1 | 29,393 | 12 | 5 | 408.3 |
Mostrar 17 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2010 Q4 | 34,509 | 0 | 0 | 0.0 |
| 2010 Q3 | 38,572 | 3 | 2 | 77.8 |
| 2010 Q2 | 33,017 | 24 | 10 | 726.9 |
| 2010 Q1 | 30,560 | 2 | 1 | 65.4 |
| 2009 Q4 | 32,842 | 40 | 22 | 1218.0 |
| 2009 Q3 | 27,514 | 0 | 0 | 0.0 |
| 2009 Q2 | 30,116 | 26 | 11 | 863.3 |
| 2009 Q1 | 30,168 | 0 | 0 | 0.0 |
| 2008 Q4 | 35,638 | 18 | 8 | 505.1 |
| 2008 Q3 | 31,675 | 40 | 14 | 1262.8 |
| 2008 Q2 | 33,459 | 0 | 0 | 0.0 |
| 2008 Q1 | 38,027 | 17 | 10 | 447.1 |
| 2007 Q4 | 39,696 | 0 | 0 | 0.0 |
| 2007 Q3 | 33,467 | 33 | 8 | 986.0 |
| 2007 Q2 | 37,514 | 0 | 0 | 0.0 |
| 2007 Q1 | 32,115 | 10 | 3 | 311.4 |
| 2006 Q4 | 6,172 | 0 | 0 | 0.0 |
Incidentes reportables
15 en archivo2010 · 2 incidentes
Employee was walking and twisted right foot.
2009 · 4 incidentes
Employee was working on beam on the highwall miner when the cable arm fell on the employee injuring his back.
Employee was traming excavator when a rock hit him in the face lacerating check bone.
Employee was using a hammer and was pulling pins when he felt a cramp in his left leg.
Employee was fueling equipment when something blew in his right eye.
2008 · 2 incidentes
Employee was going to change a torque shaft when he sprained his left ankle.
Employee was on 992G when he fell from the fender hurting his left arm.
2007 · 7 incidentes
Dust blew into employee's eyes.
Employee was prying with a bar in a push beam. The bar flew out and hit the right side of his head.
Employee was climbing off excavator and hit his left elbow.
Employee was setting beam on hwm when something gave way allowing the arm to swing around and hit ee in the head knocking him to the motor injuring his right foot and head.
Employee was stepping off a beam onto the ground and stepped on a round piece of coal fracturing his right ankle.
Cut finger with box cutter while splicing MS 42.
Employee was pushing in shot when the D11N rolled over on its side hurting his right shoulder.
The full compliance file on Elm Lick Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.