Glen Mills Metal/Non-Metal

Employee fell on same level, resulting in sprain and strain injuries.

While removing C2 tail pulley guard, the guard made contact with the employee's face around employee's chin causing a laceration requiring stitches for wound closure.

Contractor fell while trying to climb down OEM ladder on a CAT 773E haul truck.

Employee slipped on loose stone at the bottom of a ladder causing a slip and fall on same level causing pain to right hand.

While using a retractable utility knife, contact was made between the blade and employee's right knee causing a laceration.

Tripped over string used to bundle cardboard boxes.

The employee was standing on the first rung of a step ladder helping out on a crusher repair job when they went to step down and lost balance falling on the catwalk. The employee struck elbow on the catwalk.

While attempting to obtain a sample of material at the 2A stockpile the employee felt a pop in EE's arm.

Left shoulder dislocated while dismounting quarry truck causing EE to fall.

Employee was climbing stairs in tertiary plant when the rung on the step broke and the employee fell forward hitting knee.

Miner was injured on 10/7/2019 and continued working until 12/18/2019 when miner's doctor put miner off of work. Miner was climbing down a ladder of a haul truck when miner stepped on a rock and hurt knee.

While descending a portable ladder, employee missed the last rung and fell backwards. The employee received a fracture to the left foot.

Employee was climbing a ladder and about 8 ft high employee went to step on an angle and it broke which caused employee to fall and strain left lumbar and shoulder.

WHILE TWO EMPLOYEES WERE WORKING OUT OF THE MAN BASKET EE'S HAND BECAME PINCHED BETWEEN THE CONVEYOR SLED AND THE MAN LIFT HANDRAIL. THIS MOTION REMOVED THE SKIN FROM THE TOP OF EE'S HAND TO EE'S FINGERS. EE WAS TRANSPORTED BY AMBULANCE TO CROZER HOSPITAL WHERE EE HAD SURGERY ON THE HAND

Employee was under shaker holding the nuts for another Employee using an impact gun to tighten when pieces of dirt fell and went into the right eye causing it to irritate the eye

Employee went to sit down on a guard and it gave out causing employee to hit their head and elbow on the wall behind them.

Employee climbing up machine put fuel nozzle in and began fueling the 988f. EE climbed back down to check machine over it auto shut off engaged when full. EE climbed back up to top fuel off as EE was topping off, EE slipped off step landed directly on feet and felt right knee pop.

Employee was moving an oil barrel and stepped on a stone twisted left knee

Employee states EE slipped on ice on EE's right elbow near restrooms across from garage resulting in pain in EE's right elbow

Employee twisted knee exiting conveyor head box. Employee was treated at Riddle Hospital where he was diagnosed with a right knee sprain and discharged with instructions of "No weight bearing on right leg until released".

While descending the stairs in the tertiary plant one of the treads broke free causing the ee to sprain his right knee. The employee was treated and returned to restricted duty.

IE was assisting a fellow EE in the removal of a water pump. It was being lifted with the aid of a come-a-long. It appears there was a mechanical failure in the lifting device that caused the pump to drop suddenly. When the pump dropped it jerked his arm as he was holding onto the chain guiding the pump. This caused a strain to his right arm. He returned to modified duty.

Employee was exiting the welding truck. As he stepped on the running board the bracket broke. The sudden drop caused him to slip and jerk his lower back. He was treated for a lower back strain and returned to restricted duty.

The injured employee was struck by a horizontal support beam mounted on the metal decking as it was being removed at the primary crusher. The metal decking was initial struck and broke free shifting the weight.

EE was walking out of the electric house for the plant slipped after taking step to the outside.EE was diag. with a lower back sprain and told to stay out of work for a few days by the treating phys.

While installing speed reducer on head pulley conveyor 26, EE pushed the speed reducer onto shaft. Injured had his hand on back side wiggling the reducer for it to slide onto shaft. When it shot on, EE's right hand fifth finger got smashed between the speed reducer and a piece of angle.

After cutting bushing off of shaft of speed reducer, he leaned over to look at the work, and while holding torch in left hand inadvertently moved torch over his lower right arm causing burn.

EMPLOYEE BENT OVER AND PICKED A 5 GALLON SPRING WATER BOTTLE (FULL)WITH ONE HAND AND SLIGHTLY PULLED LOWER BACK MUSCLE

EMPLOYEE WAS ROLLING 55 GALLON DRUMS OF OIL OUT OF THE WAY. THE FIRST THREE DRUMS WERE HALF FULL AND MOVED EASILY. THE FOURTH DRUM WAS COMPLETELY FULL, AND WHEN HE TRIED TO MOVE IT HE FELT A PAIN IN HIS GROIN AREA.

EMPLOYEE WAS MOUNTING THE TRUCK, PUT HIS FOOT ON SECOND STEP OF THE LADDER, SLIPPED AND FELL TO THE GROUND.

Employee dropping off paper work @ office, realized office had been burglarized, for fear he backed out and fell off the step.

WAS PULLING HOSE ON FUEL TRUCK, WHEN HE SLAMMED HIS ELBOW INTO THE STEEL TRACK OF THE SHOVEL (HITACHI).

GOT OUT OF CAB OF WATER TRUCK TO MAKE SURE IT WAS LINED UP. STEPPED ON LEFT SIDE OF CAB AND LOST HIS FOOTING, FELL APPROXIMATELY 72" TO THE GROUND.

GOING INTO SHOT ROCK PILE, EE'S TIRE WENT OVER SOME TOE AND HIS LOADER ROLLED FORWARD INTO A LARGE ROCK WITH HIS BUCKET, JARRING HIS BACK.

OPERATING WATER TRUCK. WHILE WETTING DOWN #5 BENCH, EE HIT A RUT (POTHOLE) AND JARRED HIS BACK.

EMPLOYEE WAS TAKING GREASE FITTING OUT OF ADJUSTMENT CYLINDER FOR TAILPULLEY & PRESSURE IN CYLINDER SHOT GREASE FITTING INTO HIS LEFT HAND BETWEEN INDEX & MIDDLE FINGER CAUSING PUNCTURE WOUND.

STANDING ON STEPS IN FRONT OF HAUL TRUCK TO ACCESS BRAKE VALVES. WHEN HE LOST BALANCE AND CAUGHT HIMSELF BY GRABBING HAND RAILING TO KEEP FROM FALLING.

EE STATES, AS I WAS DRAGGING 4 STICKS OF HYDROMITE 820 4 1/2 X 25 ONTO THE SHOT, I FELT A SHARP PAIN IN MY LEFT GROIN AREA.

EMPLOYEE WAS STEPPING OVER THE GUARD RAIL,ONTO AN 18" WIDE LEDGE,LOST HID FOOTING AND FELL 8' DOWN TO PRIMARY CRUSHER FLOOR,BOUNCED AND FELL 2'.

EMPLOYEE WALKED OUT OF THE SHOP AND SLIPPED AND FELL ON THE ICE. THE EMPLOYEE PULLED LIGAMENTS IN HIS RIGHT KNEE. OPERATION ON 2/11/97 ON RIGHT KNEE.

EMPLOYEE WAS CLIMBING UP TO THE DROPBALL CRANE PLATFORM IN ORDER TO FUEL THE CRANE. HE LOST HISFOOTING ON THE TIRE AND FELL.

EE WAS REMOVING DRILL MUFFLER FROM THE FLORLIFT. MUFFLER PINCHED HIS LEFT HAND. FRACTURED LITTLE FINGER OF LEFT HAND.

EE WHILE ATTEMPTING TO REMOVE A PIECE OF STEEL ANGLE, USED AS A WEDGE, THIS ANGLE WAS RIGHT IN BETWEEN 2 PLATES. WHEN HIT WITH THE HAMMER, ANGLE GOT DISLODGED ADN HIT EE IN THE BRIDGE OF NOSE. STITCHES REQUIRED.

EMPLOYEE WAS WORKING ON A COME-ALONG (TOOL FOR HOISTING EQUIP.), THE CABLE JAMMED WHEN IT CAME LOOSE AND TWISTED HIS LEFT KNEE.

EMPLOYEE WAS GETTING OFF OF TRUCK AND HE PULLED A MUSCLE IN HIS LEFT ABDOMEN. IT WAS DIAGNOSED AS A HERNIA.

EE WAS CLIMBING DOWN OFF A 50 TON HAUL TRUCK WHEN HIS LEFT KNEE GAVE WAY.

EE LIFTED THE TABLE OF THE HYDRAULIC PRESS ONE KNOTCH WITH THE HELP OF OTHER OTHER HANDLE CAUSING THE WEIGHT TO SHIFT TO EE EE FRACTURED HIS THUMB ON HIS LEFT HAND.

EE WAS USING THE HYDRAULIC PRESS TO INSTALL A BEARING INTO A HOUSING FOR S-1 SCREEN. THE RAM FELL 1/4 INCH SHORT OF PUSHING THE BEARING INTO THE HOUSING. EE WITH THE HELP OF OTHER LIFTED THE T ABLE UP ONE MOR KNOTCH TO FINISH THE PRESS. THE HJANDLES ON THE TABLE BROKE SHIFTING THE FULL WIEGHT ONTO OTHER.

85033AIMED WHILE REMOVING THE KEYS FROM THE 50 TON TRUCKS THAT WERE PARKED AT THE PRIMARY CRUSHER FOR THE WEEKEND, ONE TRUCK WAS PARKED FURTHER THAN THE OTHERS IN LINE ABOUT 30" TO 36" APART. 85039IED TO STRETCH THE E XTRA DISTANCE INSTEAD OF USING THE LADDER THAT IS USED TO MOUNT AND DISMOUNT. NORMALLY THE TRUCKS ARE PARKED CLOSE ENOUGH TOGETHER THAT YOU COULD STEP FROM TRUCK TO T

HE CLAIMED WHILE HE WAS ON TOP OF AN INVERTED LOADER BUCKET PULLING ON A LEVER OPERATED COME-ALONG THAT HE WAS USING TO PULL A CUTTING EDGE INTO POSITION. ONE OF THE CLIPS THAT THE CHAIN WAS H OOKED TO BROKE LOOSE CAUSING A SUDDEN RELEASE OF PRESSURE. HE LOST HIS BALANCE, SHIFTED AND FELL FROM THE BUCKET ABOUT 5 FEET ONTO THE FLOOR STRIKING HIS HEAD AND SHOULDER ON THE CONCRETE.

EE CLAIMED WHILE CLIMBING DOWN THE CAT TRUCK HE WAS OPERATING USING STEPS AND HAND RAILS HE MISSED THE TAST STEP TWISTED TO ONE SIDE AND PULLED A MUSCLE IN HIS BACK.

WHILE INJURED WAS CUTTING AND REMOVING WORN OUT LINER PLATES FROM TEH HOT BINS OF #2 B.C. PLANT. HE WAS CUTTING A 3'X3'X 1/4" PLATE AND SET IT ON THE SCAFFOLD ABOVE WHERE HE WAS WORKING. WHE N HE CONTINUED CUTTING MORE PLATES OUT OF THE BINS HIS HOSE OF THE TORCH BECAME ENTANGLED WITH THE PLATE ON THE SCAFFOLD. HE PULLED ON THE HOSE OF TORCH CAUSING THE PLATE TO HIT HIM ON THE RI

I.NAME MOVING AIR TRACK DRILL BOOM FROM THE GARAGE TO A STORAGE AREA WITH A FRONT END LOADER. WENT TO UNLOAD THE BOOM ,PULLED CHAIN FASTENED TO BOOM TO THE BUCKET AND SLIPPED IN MUD. FELT SHAR P PAIN IN LOWER BACK.

I NAME CLAIMED HE PINCHED A NERVE IN HIS BACK WHEN HE WAS MOVING A 55 GALLON DRUM AT THE TERTIARY PLANT HE WAS MOVING AN OIL DRUM TOWARDS THE CRUSHER WHEN HIS HAND SLIPPED OFF THE EDGE OF THE DRUM & HE FELL AGAINST AN OIL TANK

WHILE REMOVING BOLTS AND EDGE SEGMENTS FROM THE CUTTING EDGE OF THE BUCKET OF A MICHIGAN FRONT-END LOADER WHEN A SHARP EDGE OF THE WORN METAL CUT THROUGH HIS GLOVE AND INTO HIS THUMB.

INJURED CLAIMED WHILE HE WAS CLIMBING DOWN FROM OPERATORS CAB OF A 769 CAB TRUCK.HE WAS USING THE HANDRAIL AND FACING THE TRUCK.INJURED MISSED THE LAST STEP AND HIS WEIGHT PULLED HIS BACK,HE S TILL HAD HOLD OF THE HANDRAILS.HE DID NOT FALL.

AFTER CHECKING BEARING AND DURING THE REINSTALLATION OF THE FLYWHEEL WHICH HAD BEEN ROLLED TO SPILL END OF INCLINED SCREW SCREEN,INJURED HAD PICKED UP FLYWHEEL AND WAS WALKING WITH FLYWHEEL AT CHEST HEIGHT UP INCLINED WALKWAY WHEN HIS FOOT SLIPPED ON STONES LYING ON WALKWAY JERKING HIS NECK.

EE CLAIMED WHILE TIGHTENING THE 7' CRUSHER BOWL HE HAD TO LIFT THE BOWL PUSHING CYLINDER UP SO HE COULD MOVE THE CRUSHER. HE THAN LOST HIS BALANCE FALLING BACK AND HITTING HIS BACK ON WORK PLA TFORM.

EMPL RIDING A LOADED RAIL CAR DOWN THE RAIL TRACK.WHEN IT CAME TIME TO STOP THE CAR,THE BRAKES WOULDNT HOLD.AFTER HE PUT THE HANDBRAKE ON HE JUMPED OFF CAR HURTING LEG WHEN HE HIT THE GROUND.

EE CLAIMED WHILE UNDER A 50 TON TRUCK ABOUT 500' AWAY AND ON THE SAMEL LEVEL OF THE SHOT, WHEN HE DETONATED THE 29 TOE HOLES ON LEVEL 5. WHEN THE SHOT WENT OFF A ROCK FLOW UNDER THE TRUCK AND STRUCK HIM ON HIS LEFT LEG BENEATH THE KNEE. HE DID NOT KNOW WHAT SIZE ROCK HIT HIM. AFTER THE ACCIDENT, EE FOUND 6 ROCKS THAT WERE 2" X 8" IN DIZ. UNDER THE TRUCK.

OPENING SHOWER-ROOM DOOR.THE DOOR CAME BACK BEFORE HE WAS THROUGH IT.TRIED TO STOP TO DOOR WITH ARM,ARM WENT THROUGH MIDDLE PANE OF GLASS CUTTING RIGHT ELBOW.

HE WAS USING HTE EXYGEN-PROPANE TORCH CUTTING ON A LOADER BUCKET. THE EXYGEN HOSE BLEW A HOLE IN THE HOSE TEN FOOT FROM THE TORCH WHERE HE WAS WORKING. HE WALKED OVER TO THE TANKS TURNED THE M OFF AND WALKED BACK TO THE HOSE, WHERE IT WAS LEAKING. HE PICKED THE HOSE UP TO LOOK AT IT, WHEN HE DID A LARGE BALL OF HIS WELDING GLOVES AND BURNED HIS FINGERS. HE RECEIVED 3RD DEGREE BU

HH CLAIMED WHILE BURNING SLAG OFF A 3" PIPE FROM THE DUST COLLECTOR WATER LINE, HE WAS HOLDING ON TO THE PIPE WITH HIS LEFT HAND, AND BURNING WITH HIS RIGHT HAND. AS HE FINISHED BURNING HE PUL LED THE TORCH ACROSS HIS LEFT HAND.

EE CLAIMED WHILE HE WAS ON THE CONVEYOR BELT REPLACING BELT CLIPS. WHILE HE WAS ATTEMPTING TO GET DOWN FROM THE CONVEYOR BELT HE STEPPED OVER THE HAND RAILING ON THE OTHER SIDE USING THE RAIL AS A LADDER TO GET DOWN. HIS FOOT SLIPPED ON THE RAIL, CAUSING HIM TO STRIKE HIS CHIN ON THE SAME RAILING.

SEE ATTACH SHEET BUT THE SHEET WAS NEVER WITH THE NOTE OH WELL !!!!!!

I NAME CLAIMED WHILE CHANGING A CHUTE SWING DOOR FROM ONE OPENING POSITION TO ANOTHER DOOR INSIDE CHUTE IS 8FT LONG BY 18IN WIDE POSITIONED IN FRONT OF S5 SCREEN HE PUT A PIPE ON THE END OF TH E LEVER FOR BETTER LEVERAGE PIPE WAS A 2IN PIPE OVER A 1IN PIPE TWO PEOPLE HAVE TO SWING DOOR BACK & FORTH TO GET IT LOOSE TO OPEN WHEN IT CAME LOOSE THE END OF THE PIPE HIT HIM IN CHIN MAJOR

I NAME CLAIMED WHILE CLIMBING UP THE LADDER OF A 275 LOADER TO TALK TO AN OPERATOR ABOUT PUSHINGHE SLIPPED ON THE BOTTOM RUNG ON THE LADDER OF THE LOADER IN DOING THIS HE PULLED SOMETHING IN H IS NECK

I.NAME IN SCREENING TOWER CHECKING S-9 SCREEN.WAS WALKING DOWN FLIGHT OF STAIRS TO GROUND.GOT TO LAST STEP,SLIPPED IN MUD SPRAINING LEFT ANKLE.

I.NAME WALKING THROUGH SNOW TO POLE BARN FROM PARKING AREA.LEFT FOOT SLIPPED OUT FROM UNDER HIM IN THE SNOW.FELT PULL IN LOWER RIGHT BACK,WHICH LATER IN THE DAY BEGAN TO HURT.

I.NAME LIFTING SCREEN CLOTH PANEL OVER SCREEN SIDE TO ANOTHER EMPL.FELT INTENSE PAIN IN MIDDLE OF HIS BACK -THROACIC STRAIN TO BACK.

HE CLAIMED WHILE HE WAS SITTING UP INSIDE FEEDER, HE WAS BURNING OFF BOLTS THAT RETAIN WEARPLATER FROM THE OUTSIDE, WHEN HE PULLED THE PLATE OUT OF POSTION, ONE BOLT GOT TIPPED BETWEEN THE PLA TE AND HIS LEFT LEG ATTEMPTING THROUGH PANTS AND ROLLED DWN HIS LEG.

HE CLAIMED WHILE TIGHTENING A NUT AND BOLT FASTENER WITH TWO WRENCHES. HE HAD ONE WRENCH ON THE HEAD OF THE BOLT WEDGED AGAINST A PIPE, SO HE COULD HAVE BOTH HANDS FREE TO PULL ON THE OTHER W RENCH. WRENCH HE HADWEDGED SLIPPED OFF, AND STRUCK HIM IN THE MOUTH BREAKING OFF A PIECE OF TOOTH ON HIS LOWER RIGHT JAW.

HE CLAIMED WHILE HE WAS FUELING A CAT LOADER. HE WAS STANDING HALFWAY UP THE LADDER HOLDING ON WITH HAND, AND HOLDING THE FUEL NOZZLE IN THE LOADER WITH THE OTHER HAND. HE REMOVED THE NOZZLE SWINGING IT AROUND TO GO DOWN THE LADDER AND TH E EAMINING FUEL IN THE NOZZLE SPLASHED IN HIS FACE GOINING UNDER HIS SAFTEY GLASSES.

HE CLAIMED WHILE REMOVING CONCAVES FRM PRIMARY CRUSHER, THE CONCAVES WERE BEING REMOVED BY STRICKING WEDGES WITH SLEDGE HAMMER. THE TOP OF THE WEDGE WAS MUSHROOMED OVER. WHEN HE HIT THE WEDG E A PIECE BROKE OFF, HITTING HIM IN THE LEFT LEG

I.NAME CLAIMED WHILE HELPING TO REMOVE ALLOY CONCAVES FROM PRIMARY CURSHER, HE HIT CONCAVES WITH A 20 LB. SLEDGE HAMMER TO BREAK THEM LOOSE FROM THE WALL OF THE CRUSHER. WHEN HE WAS HITTING TH E CONCAVES, HE HIT TOO CLOSE TO THE EDGE OF THE CONCAVE, BREAKING A CHIP OF STEEL OFF, WHICH HIT HIS LOWER LEFT LEG.

I.NAME CLAIMED WHILE HE WAS SHOVELING DIRT IN THE CRUSHER DUMP HOPPER; HE FELT A PAIN IN LOWER BACK AREA. ACUTE BACK STRAIN.

EMPL CLAIMED WHILE MOVING NEW DESK INTO TEST LAB THERE WAS 3/4" STONE SPREAD AROUND OUTSIDE OF BUILDING. TRUCKING CO DRIVER WAS PUSHING DESK ON HAND KART WHILE EMPL WAS GUDING HANDLE END OF KA RT. RUBBER TIRES GOT STUCK IN 3/4" STONE. DRIVERTHEN GAVE ESK SHOVE TO FREE WHEELS. AT THAT TIME ALL OF WEIGHT WAS PUT ON EMPL CAUSING HIM TO DROP KART SMASHING RIGHT THUMB BETWEEN HAND TRUCK

EE CLAIMED WHILE PICKING UP TRASH FROM THE POLE BARN, THE 55 GALLON DRUM HE THOUGHT WAS ONLY FILLED WITH PAPER. HE PICED UP THE DRUM THINKING IT WAS LIGHT, WHICH IN REALITY HE FOUND OUT LATER SOMEONE HAD PUT SOME JUNK STEEL IN THE BOTTOM OF THE DRUM UNDER THE PAPER.

EE WANTED TO GET A PIECE OF FRUIT FROM HIS LUNCH PAIL. TO DO THIS MEANS THAT HE HAD TO OPEN PASSENGER DOOR OF THE 773 B CAT TRUCK WHICH HE WAS OPERATING TO HAUL SHOT MATERIAL TO THE PRIMARY CR USHER. HE REMOVED SNACK FROM HAND FROM DOOR JAMB, CLOSING DOOR ON THUMB.

AS HE WAS HELPING TO REMOVE PLYWOOD FORMS HE BENT OVER TO LOOSEN FORM FROM THE BOTTOM OF THE STRUCTURE CAUSING IT TO FALL OFF THE TOP OF THE FORM, STRICKING HIM ON RIGHT SIDE OF THE HEAD JUST ABOVE THE EAR.

EE WAS ATTEMPTING TO UNLOAD CONCRETE MAN HOLE EXTENSIONS OFF FLAT BED ROAD TRUCK HE FELT SOMETHING PULL IN HIS LEFT SHOULDER. THESE UPRIGHT CYL. HAD TO BE LAID OVER IN ORDERTO UTILIZE FORLIFT. HE ASSISTED BY OTHER BUT EVEN WITH HELP IN ORDER TO PREVENT CYLINDER FROM FALLING HARD INTO TRUCK BED AND POSSIBLE BREAKING HE STRAINED HIS SHOULDER DURING THIS PROCESS.

GENERAL CONTRACTOR WORKING ON CONSTRUCTION PROJECT FELL OFF WALL 9' ABOVE GRADE WHILE PERFORMING CONSTRUCTION DUTIES.

HE CLAIMED HE WAS WORKING IN THE WEEDS WHERE HE WERE REMOVING SCRAP PARTS FROM AN SHOVEL. HE WAS GUIDING A PIECE OF STEEL WHEN THE LAOD SLIPPED IN THE MUD CAUSING HIM TO BACK INTO PIECE OF RU STY STEEL IN THE BUSH.

HE CLAIMED WHILE INSTALLING A NEW AIR COMPRESSOR ON A NEW MOUNTING PLATE. THE BOLTS IN THE PLATE DID NOT QUITE LINE UP WITH THE COMPRESSOR HOLES. HE RAISED THE CORNER WITH PINCH BAR WHILE HE PUT HIS HAND UNDER THE COMPREESOR TO GUIDE THE COPRESSOR OUT OF THE PLATFORM/

HE CLAIMED REMOVING WEAR PLATE HE WAS STRUCK IN RIGHT HAND WITH WEAR PLATE AS IT WAS SLIDING DOWN CHUTE TOWARDS HIM. HE WAS ATTEMPRING TO KEEP PLATE FROM STRICKING HIS LEGS OR FEET.

EMPLOYEE WAS STANDING ON A TEN FOOT STEP LADDER,WELDING ANGLE ON A CONVEYOR.EMPLOYEE OVER-EXTENDED HIMSELF AND FELL OFF THE LADDER.

EMPLOYEE WAS WELDING UNDER A BELT CONVEYOR. WHEN HE WENT TO STAND UP, HE HIT HIS HEAD ON THE CONVEYOR. THE EMPLOYEE WAS WEARING A HARD HAT. HE FELT PAIN IN HIS BACK AND LATER HAD NUMBNESS IN T HE HANDS AND LEGS.

EMPL CLAIMED AFTER CHANGING SCREEN CLOTH ON MIDDLE DECK HE WAS CLIMBING OUT OF SCREEN WHEN HE SLIPPED & HIT CHIN ON TOP DECK DISCHARGE LIP OF S-6 BREAKING TOOTH OFF. LEFT FRONT EYE TOOTH & BR UISED CHIN.

EMPL CLAIMED WHILE ATTEMPTING TO LIFT TONGUE OF P2160WJD AIRCOMPRESSOR FROM PINTEL HITCH OF TOW VEHICLE. AS HE WAS LIFTING HITC OFF HE FELT PAIN IN LOWER BACK. HE SAID HE MIGHT NOT HAVE USED L EGS AS MUCH AS HE SHOULD HAVE.

WHILE WORKING ON CAROUSAL FOR PRIMARY DRILL RIG IN GARAGE. WELDER HE WAS ROTOATING WORK TO CONCTIUE CUTTING RPOCESS. IN PREPARTION HE LAID CUTTING EQUIPMENT ON NEARBY CHAIR. AS HE STOOD AND STEPPED BACKWARDS, LEWFT LEG CONCTATED STIIL HOT CUTTING ELECTRODE CAUSING PUNTURE TYPOE BURN TO BACK OF CALF.

AS HE WAS WELDING OVERHEAD HE WAS SITTING ON A BOARD AND HOT WELD SPATTER DROPPED ON HIS LAP BURNING THROUGH FLAME RETARDENT COVERALLS BLUE JEANS AND SWEAT PANTS. IT CUASED 2ND DEGREE BURNS T TO RIGHT BUTTOX AND UPPER THIGH AT GROIN AREA.

HE CLAIMED WHILE ATTEMPTING TO REMOVE BUSHING FROM TABLE OF PRIMARY DRILL RIG HE FELT PAIN ON LEFT WRIST AREA.

I NAME CLAIMED WHILE ATTEMPTING TO MOVE PLATE WITH ANOTHER MEPL WHEN HIS FOOT SLIPPED ON SNOWY GROUND CAUSING STRAIN TO BACK AND DOWN LEG

I.NAME CLAIMED WHILE USING AN AIR HAMMER TO DRILL HOLES IN A LARGE ROCK IN THE QUARRY THE ACCIDENT HAPPENED WHEN HE WAS ON THE LAST HOLE IN THE ROCK NEAR THE BOTTOM AS HE STARTED THE HOLE 3 FT DOWN THE AIR VALVE STUCK OPEN AT THE SAME TIME THE HAMMER JUMPED OUT OF THE HOLE CAUSING HIM TO LOSE HIS BALANCE AND FALL BACKWARDS THIS SUDDEN MOVEMENT CAUSED HIM TO PULL A MUSCLE IN HIS RT

I.NAME CLAIMED WHILE HE WAS STRAIGHTENING A BENT RAIL SWITCH ARM LEVER HE WAS USING A PICK AS THE TOOL TO PRY BENT LEVER UP PICK SLIPPED OUT FROM UNDER THE LEVER SHERE HE HAD IT LODGED BECAUSE OF THE PRESSURE HE HAD ON THE PICK IT CAME BACK & HIT THE TARSUS OF HIS FOOT (RT.)

WAS JACKHAMMERING TOE IN THE QUARRY THE TOE WAS ONLY A SLIGHT HUMP WHEN HE STARTED THE HOLE HE STOPPED TO CLEAN THE HOLE OUT THE TRIGGER ON THE AIR JACKHAMMER STUCK OPEN WHILE HE WAS PULLING THE STEEL OUT OF THE HOLE A PIECE OF ROCK CHIPPED OFF AT THE TOP OF THE HOLE CAUSING THE AIR HAMMER TO FALL AWAY FROM HIM HE GRABBED THE HAMMER FEELING A PIAN IN HIS BACK

CLAIMED WHILE CHANGING A GREASE LINE UNDER 7' CRUSHER DISCHARGE BOX HE WAS USING AN 8' LADDER WHICH HE HAD LEANING AT THE TOP AGAINST THE OUTSIDE WALL OF THE BOX WHEN CLIMBING DOWN A SECONDE TIME THE LEFT SIDE OF LADDER SLIPPED IN DIRT CAUSING HIM TO SWING TO THE RIGHT AND THROWING HIM INTO A PLATE OF STEEL ON OPPOSITE WALL

BURNING ANGLE FOR HANDRAIL

GETTING OFF THE LOADER, CLIMBING DOWN LADDDER AND TWISTED LOWER BACK.

I.NAME CLAIMED WHILE HE WAS CLIMBING DOWN FROM TRUCK THE BOTTOM STEP WAS SWINGING BACK AND FORTH HE MISJUDGED STEP MISSING IT AND FELL TO SAVE HIMSELF HE CLUNG TO RAILS OF LADDER STRIKING HIS RT SIDE AGAINST SAME STEP

I.NAME CLAIMED 4HILE HE WAS PREPAIRING TO CHECK B C SCREENS HE WAS LIFTING UP THE DISCHARGE CHUTE WITH 3 OTHER EMPLOYEES HE FELT A PULL AND SHARP PAIN IN HIS LOWER RT ABDOMEN APPROX 3 WEEKS L ATER WHILE AT H2ME HE FELT MORE PAIN AGAIN THIS TIME MORE SEVERE HE THEN WENT TO THE DOCTOR

I,NAME CLAIMED 4HILE USING WRENCH TO REMOVE BOLTS FROM SKIRT BOARD THE WRENCH SLIPPED OFF NUT AND STRUCK RING FINGER ON RIGHT HAND. HIS RIGHT HAND SLAMMED INTO THE SIDE OF THE SCREEN.

I,NAME CLAIMED 4HILE LIFTING 3/4" SCREEN PLATE INTO POSITION HE FELT A SHARP PAIN IN HIS LEFT SIDE WHICH CONTINUED TO BOTHER HIM FOR SEVERAL DAYS, HE THAN WENT TO HOSPITAL TO GET CHECKED OUT, AND FOUND HE PU5LED A MUSCLE.

I,NAME CLAIMED 4HILE HE WAS REMOVING SPIDER BOLTS ON THE PRIMARY CRUSHER HE WAS STANDING ON A WALKWAY HOLDING A 1" AIR WRENCH, CHEST LEVEL WITH ANOTHER EMPLOYEE. WHEN THE NUT ON THE BOLT WAS T IGHTENED A PIEC9 OF RUST BLEW INTO HIS LEFT EYE.

HE WAS HOLDING 7HE HAND RAIL WITH HIS LEFT HAND,AND A RADIO WITH HIS RIGHT HAND.IN HIS MOVEMENT WHEN HE MADE CONTACT WITH THE SHOVEL IT THREW HIM OFF BALANCE THROWING HIM OVER THE HANDRIAL ON THE LEFT,FALLIN1 TO THE FLOOR 4"TO 5" BELOW.

HE WAS LOADING 2XYGEN TANKS IN THE B.C. PLANT PICKUP. HE TWISTED HIS R WRIST FEELING PAIN, LATER USING HIS HAND WITH A CHIPPING HAMMER HIS WRIST BECAME MORE IRRATATED

HE WAS WALKING 7O THE AIR COMPRESSOR, GETTING READY TO HOOK UP TO DUMP TRUCK. HE CLAIMED HE SLIPPED ON ICE, FELL HURTING HIS BACK. HE HAS PAIN IN LOWER BACK AND DOWN RIGHT LEG

CHANGING WEAR S5EEVE ON DHD 360 HAMMER.

I.NAME CLAIMED 4HILE CHANGING WEAR SLEEVE ON HAMMER WHICH WAS WORN THIN & TAPERED AS A RESULT VERY SHARP WHILE TRYING TO KNOCK BIT ALIGNING BEARING OUT OF SLEEVE RESULTING CUT REQUIRING STITCH ES 3

STEPPING DOWN F9OM DROPBALL CRANE.