Hayden Hill Mine: 7 citaciones de la MSHA Metal/Non-Metal

A RUBBER BAND WAS USED TO HOLD THE THROTTLE SLIGHTLY OPEN ON A SNOWMOBILE WHILE THE MACHINE WAS BEING PULL STARTED. WHEN EE PULLED THE ROPE SHE SLIPPED ON SOME ICE, FELL FORWARD ONTO THE HANDL E BARS. THE THROTTLE STUCK WIDE OPEN AND THE SNOWMOBIL WENT OUT OF CONTROL THROWING HER OFF. THE SNOWMOBILE CONTINUED UP AN EMBANKMENT AND CAME TO REST AGAINST A 988 LOADER.

WHILE CLIMBING OUT OF THE BACK OF A SERVICE TRUCK, EE SLIPPED ON THE BUMPER CAUSING HIS KNEE TO TWIST.

WHILE OPERATING DOZER ON THE LEACH PAD, EMPLOYEE GOT SOME DUST PARTICLES IN HIS RIGHT EYE.

WAS ON TOP OF THE LUBE TRUCK TAKING A HOSE LOOSE. HE SLIPPED CAUSING A STRAIN TO LEFT ANKLE & LACERATION TO LEFT MIDDLE FINGER.

EE WAS ATTEMPTING TO ADJUST THE 44 CONVEYOR BELT TRACKING BY MOVING A RETURN ROLLER WITH A HAMMER. WHEN HE STRUCK THE RETURN ROLLER BRACKET THIS HAMMER BOUNCED BACK AND INTO THE BELT ON THE BO TTOM SIDE. THE HAMMER WAS PULLED BETWEEN THE BELT AND THE RETURN ROLLER. HE DID NOT LET GO OF THE HAMMER IN TIME AND HIS LEFT ARM WAS ALSO PULLED BETWEEN THE BELT AND THE RETURN ROLLER.

EE WAS LEANING FORWARD ADJUSTING THE SEAT THE STEERING COLUMN FELL FORWARD CAUSING THE STEERING WHEEL TO HIT HIM IN THE FOREHEAD.

EE WAS MOVING A CAST IRON POT & PINCHED RIGHT THUMB BETWEEN ANOTHER POT RESULTING IN A PARTIAL AVULSION.

EE WAS CUTTING A BELT WITH A UTILITY KNIFE. UTILITY KNIFE SLIPPED OUT OF GROVE, CUTTING HIM 2" ABOVE THE RIGHT KNEE IN THE THIGH AREA.

EE WAS PUTTING PIPES IN A SECONDARY SCREEN CHUTETO PREVENT LEAKAGE OF MATERIAL. ONE PIPE WAS TO SHORT & DIDN'T REST ON OPPOSITE SIDE. PIPE FELL OFF OF THAT SIDE, PIVOTING ON THE OTHER, PINCHIN G LITTLE FINGER OF RIGHT HAND.

WHILE HAULING ORE TO THE HEAP LEACH PAD, EMPLOYEE BECAME EXPOSED TO LIME DUST WHEN BACKING UP TO DUMP.

EMPLOYEE WAS KNEELING DOWN CUTTING ON A RIPPER SHANK WHEN KNEE STARTED HURTING.

EMPLOYEE WAS WALKING TO AN AREA BY THE LEACH PADTO TAKE A WATER SAMPLE. HE TWISTED HIS FOOT AS HE WAS WALKING.

THE EMPLOYE EHAD BALANCED A DRILL HAMMER ON THE DECK OF THE DRILL. THE HAMMER FELL OVER HITTING HIM ON THE SHOULDER.

EMPLOYEE WAS PULLING INTO DUMP AREA, GETTING READY TO BACK UP AND DUMP. HE HIT A BUMP THAT JARRED HIS LOWER BACK.

EMPLOYEE WAS TRYING TO OPEN HER STUCK LOCKER DOOR WITH A SMALL PRY BAR. BAR SLIPPED OUT, HITTING HER ABOVE THE RIGHT EYE IN THE EYEBROW AREA.

EE HOPPED OUT OF THE BACK OF PICKUP TO THE FLOOR, TWISTING HIS ANKLE. HE WAS IN THE BACK OF THE PICKUP UNLOADING DRILL SAMPLES.

EE TRIPPED AND TWISTED ANKLE WHILE WORKING AT SECONDING CRUSHER. STEPPED DOWN APPROX. ON TO A ROCK.

EMPLOYEE SLIPPED OFF THE FRONT OF THE LUBE TRUCK & FELL INTO THE EDGE OF THE DECK OF A BLAST HOLE DRILL HITTING HIS UPPER RIGHT LEG

EMPOLOYEE WAS BREAKING SLAG OFF OF ASSAY SAMPLER WITH A HAMMER. A PIECE OF SLAG FLEW UP UNDER HIS SAFETY GLASSES AND INTO HIS EYE.

EE WAS CLEANING THE TAIL OF A CONVEYOR. THE WIND BLEW A DIRT PARTICLE IN HIS LEFT EYE.

EE WAS CLIMBING OFF A LOADER THAT HE WAS WORKING. AS HE STEPPED TO THE GROUND FROM THE LADDER, HE STEPPED ON A GANTRY PIN ON THE FLOOR WHICH ROLLED UNDER HIS FOOT CAUSING IT TO TWIST.

EMPLOYEE STATED THAT HE HAD SMALL BLISTERS OR MAY BE ATHLETE'S FOOT ON HIS LEFT FOOT AND HE THOUGHT THE RUBBER BOOTS HE WAS WEARING WAS CAUSING THIS CONDITION. HE HAD GOTTEN WATER IN THEM AND WORE THEM WITH HIS FEET WET ALL DAY.

WHILE EMPLOYEE WAS PULLING SAMPLES OUT OF THE DRILL DECK TO COLLECT A SAMPLE HE FELT A STRAIN IN HIS LOWER BACK

EMPLOYEE WAS PRYING A CHUCKER WITH A BAR THAT WEDGED IN THE GYRO CRUSHER SPIDER. HIS FEET SLIPPED AND AS HE TRIED TO CATCH HIMSELF WITH HIS HANDS HIS FINGER WAS MASHED BETWEEN PRY BAR & CRUSHE R HEAD.

EMPLOYEE WAS PUSHING SLIDING DOOR SHUT, LET HIS FINGER GET BETWEEN THE DOOR JAM & THE DOOR, CAUSING DOOR TO SMASH HIS FINGER.

EMPLOYEE WAS WALKINGALONG OVERLAND BELT AREA SLIPPED ON ICE CAUSING HIM TO TWIST HIS KNEE SNOWY ICY CONDITIONS

EE WAS CLIMBING THE LADDER TO GET INTO THE CAB OF THE DOZER. FELT A SHARP PAIN IN LEG.

EMPLOYEE WAS REMOVING BOLTS THAT HOLD WEAR PLATES ON A LOADER BUCKET. ONE OF THE BOLTS SPUN WITH THE AIR WRENCH. A BURR ON THE BOLT CAUGHT HIS GLOVED FINGER.

EE GOT OFF HIS LOADER TO CHECK A SHOT TUBE IN THE DIGGING FACE. AS HE WAS WALKING AWAY SOME ROCKS CAME DOWN AND HIT HIM. THIS WAS INTIIALLY A 1ST AID INJURY. ON 10-15-94, EE DEVELOPED A VIRAL INFECTION IN A BRUISED AREA ON HIS LEG AND WAS AMITTED TO THE HOSPITAL.

EE WAS WELDING ON THE CONVEYOR. HE RAISED HIS HELMET SO THAT HE COULD SEE TO KNOCK SOME COMPACTED DIRT OUT OF HIS WAY. AS HE DID A PIECE OF DIRT FLEW UP INTO HIS EYE.

EE WAS CHANGING TOOTH ADAPTER ON LOADER BUCKET WITH A SLEDGE HAMMER A PIECE OF METAL CHIPPED OFF AND PUNCTURED LEFT ARM.

EMPLOYEE WAS CLIMBING OFF THE BLAST HOLE DRILL TO MEASURE THE DEPTH OF THE HOLE HAND SLIPPED OF THE DOOR JAM CAUSING HIM TO DROP TO GROUND (APPROX 3FT) BENDING HIS LEFT KNEE INWARD

EE WAS IN HIS TRUCK AFTER LUNCH WHEN ANOTHER TRUCK BACKED INTO THE RIGHT SIDE OF HIS TRUCK. EE REPORTED TO HIS SUPERVISOR THAT HE WAS UNABLE TO WORK AFTER THE INCIDENT. DAMAGE TO TRUCK WAS RIG HT SIDE HANDRAIL & RIGHT SIDE MIRROR.

EMPLOYEE WAS WALKING TO STACKER TURNED & T WISTED KNEE

EE WAS CLEANING A PARKING BRAKE PIN ON THE GRINDER. GRINDER CAUGHT THE PIN AND PULLED HIS FINGERS INTO THE WHEEL.

WHILE MAKING A PREOPERATIONAL CHECK ON THE BACKHOE RADIATOR CAP CAME OFF SPRAYING EMPLOYEE WITH HOT ANTIFREEZE.

WAS DRIVING HAUL TRUCK UP THE ROAD ROUNDING A CORNER AND SLID IN MUD INTO A SAFETY BERM.

EE WAS OPERATING LOADER, LOADING TRUCKS, HIT A HARD SPOT IN THE WALL CAUSING REAR END OF LOADER TO COM UP THEN DROP DOWN. SEAT BELT SUPPOSEDLY SLIPPED CAUSING EE TO BOUNCE UP AND HIT HEAD ON C EILING OF LOADER.

EMPLOYEE WAS AT THE BOTTOM OF A CONVEYOR BELT PILE TRYING TO BREAK DOWN A SMALL WALL OF MATERIAL THAT WAS BUILDING UP. SOME OF THE MATERIAL CAME DOWN & CAUGHT HIS FEET & THEN MATERIAL KEPT COMING DOWN UNTIL HE WAS PARTIALLY BURIED. WAS STUCK APPROXIMATELY 2 1/2 HRS BEFORE WE GOT HIM OUT.

EMPLOYEE HIT A DIP IN THE HAUL ROAD WHILE DRIVING A TRUCK. HAD SEAT BELT ON AND CAUSED UPPER BODY TO TWIST.

EMPLOYEE WAS IN BALL MILL REMOVING BALLS. TRIED TO LOOSEN BALLS UP WITH A SLEDGE HAMMER. A PIECE OF METAL FLEW UP FROM IMPACT AND GOT IN LEFT EYE.

WHILE REMOVING WEAR IRON FROM A LOADER BUCKET WITH A IMPACT WRENCH, THE RETAINING BOLT SPUN AND A PIECE OF METAL CUT LEFT HAND.

EMPLOYEE WAS WASHING THE WINDSHIELD ON THE DOZER WHEN HE SLIPPED AS HE CAUGHT HIMSELF HE TWISTED AROUND CAUSING A STRAIN TO HIS GROIN AREA

EMPLOYEE WAS MOVING A DRILL HAMMER ACROSS THE SHOP FLOOR. HE SLIPPED AND FELL WITH HAMMER, HURTING RIGHT SHOULDER & NECK AREA.

EMPLOYEE WAS CLIMBINGDOWN THE REAR LADDER OF THE SERVICE TRUCK HIS FOOR SLIPPED OFF A RUNG CAUSIGN HIM TO DROP DOWN TOT HE FLOOR. HE LANDED ONT EH FRONT PART OF HIS RIGHT FOOT.

EMPLOYEE WAS WALKING FROM ADMINISTRATIN BUILDING TO EQUIPMENT READY LINE. TWISTED ANKLE & FELL.

EMPLOYEE WAS BACKING UP IN RUBBER TIRE DOZER & RAN OVER A ROCK CAUSING A SIDE SHIFT OF HIS BODY.

EMPLOYEE WAS WALKING TO THE CRUSHER SHOP IN THE SNOW, SLIPPED & FELL CATCHING HIMSELF WITH RIGHT ARM.

EMPLOYEE WAS SHOVELING SPILLED MATERIAL ONTO A CONVEYOR BELT. BANGED HIS HAND ONTO THE TAIL PULLEY GUARD, SMASHING RIGHT INDEX FINGER BETWEEN GUARD & SHOVEL.

EMPLOYEE WAS DRILLING OUT A BROKEN BOLT ON A PIECE OF EQUIPMENT. WHEN STANDING UP, A PIECE OF DRILL CUTTING THAT WAS STUCK TO HIS FOREHEAD ROLLED INTO HIS RIGHT EYE.

EE WAS TRYING TO LIFT AND SLIDE SOME WEAR PLATE ONTO THE FOLKS OF FORKLIFT, EE FELT PAIN ON HIS LOWER BACK.

EMPLOYEE WAS TALKING TO HAUL TRUCK DRIVER WHEN HE STEPPED BACK TO WAVE THE DRIVER CLEAR. HE TRIPPED OVER A ROCK & FELL BACKWARDS CATCHING HIMSELF WITH HIS LEFT ARM.

WHILE THROWING SPILLED ROCKS INTO THE CONES OF THE CRUSHER, A ROCK CAUGHT BETWEEN THE CONE & SHIRTING. EMPLOYEE TRIED TO PUSH THE ROCK IN & THE ROCK CAUGHT THE CUTICAL OF HIS FINGER TILL THE N AIL POPPED OVER TGE SKIN.

WHILE CUTTING RUBBER SKIRTING FOR THE STACKER WITHA KNIFE, THE KNIFE SLIPPED AND CUT RIGHT LEG.

WHILE CHANGING DRIVE BELTS ON VIBRATING SCREEN DRIVE. PRYING MOTOR WITH A PRY BAR TO RELEASE TENSION ON BELTS. EMPLOYEE WAS PUTTING NEW BELTS ON WHEN PRY BAR BENT & MOTOR DROPPED CATCHING IN DEX & MIDDLE FINGER OF LEFT HAND BETWEEN BELTS &SHEAVE.

WHILE THE EMPLOYEE WAS WALKING FROM A DRILL TO HAUL TRUCK HE TWISTED HIS RIGHT ANKLE,CAUSING HIM TO FALL AND HIT HIS RIGHT KNEE ON A ROCK AND ALSO SCRAPING RIGHT ARM NEAR ELBOW.

WHILE THE EMPLOYEE WAS ASSISTING IN HOOKING UP AND MOVING THE CONVEYOR SECTION, DUST WAS KNOCKED OFF THE CONVEYOR AND GOT INTO THE EMPLOYEE'S RIGHT EYE.

WHILE THE EMPLOYEE WAS REACHING TO OPEN A VALVE THE EMPLYEE FELT A SHARP PAIN IN HIS BACK & NECK AREA

WHILE THE EMPLOYEE WAS PUTTING CLIPS ON FENCE WITH PLIERS. IN DOING SO, THE EMPLOYEE RECEIVED A PUNCTURE WOUND TO HIS RIGHT FOREARM.

MAINTENCE WAS IN PROGRESS, INSTALLING A LIP PROTECTOR. EMPLOYEE WAS STANDING APPROX. 10' AWAY WHEN THE MECHANIC HIT THE LIP PROTECTOR WITH A SLEDGE HAMMER, A SMALL PIECE OF IRON FLEW ACROSS AN D STRUCK THE EMPLOYEE IN THE RIGHT FOREARM.

WHILE THE EMPLOYEE WAS ATTEMPTING TO HOOK UP A FLIGHT PUMP, FOR REMOVAL FROM A POND, THE BANK THE EMPLOYEE WAS STANDING ON GAVE WAY UNDER THE LEFT FOOT, CAUSING THE EMPLOYEE TO TWIST HIS RIGHT KNEE.

WHILE THE EE WAS OPERATING HIS HAUL TRUCK THE EE RAN OVER A DIP IN THE ROAD IN DOING SO THIS CAUSED THE EE TO BE JOSSELED INSIDE THE OPERATOR S CAB.

WHILE WALKING, EMPLOYEE WAS STEPPING DOWN (NEXT TO #7 BELT) AND SLIPPED. EMPLOYEE USED HIS HAND TO TRY TO CATCH HIMSLEF ON THE HAND RAIL WHEN HE INJURED HIS WRIST.

EMPLOYEE WAS LIFTING RIM OF HAUL TRUCK. CHAIN OR RIM SLIPPED AND RIM FELL LANDING ON LEFT FOOT

EMPLOYEE WAS CLIMBING LADDER OF HAULAGE. EMPLOYEE'S FOOT SLIPPED ON SLIPPERY STEP AND LEFT HAND SLIPPED FROM WET RAIL. EMPLOYEE CAUGHT HIMSELF WITH RIGHT HAND.

EMPLOYEE WAS OPENING INSPECTION DOOR TO CHECK TRANSMISSION FLUID. EMPLOYEE FELT A PULL IN NECK.

EMPLOYEE WAS SHAKING A NEW CAN OF PAINT (AEROSOL). HIS LEFT HAND TO MIX IT WHEN IT EXPLODED. APPEARS THAT SEAM RUPTURED AND BOTTOM OF CAN SEPARATED FROM REMAINDER OF CAN.

EMPLOYEE WAS WALKING INTO THE LEACH PAD AREA AND SLIPPED ON THE ICE THAT HAD BUILT UP FROM THE SPRINKLER SYSTEM.

WHILE ATTEMPTING TO CHAIN THE SECURITY BRONCEO TO HIS SERVICE TRUCK EE SLIPPED ON THE ICY ROAD LANDING UPON HIS FLASHLIGHT WHICH WAS IN HIS BACK POCKET.

EE WAS STEPPING OFF THE BACK OF THE LUBE TRUCK AND SLIPPED ON MUD WATER AND GREASE ON FLOOR.

EMPLOYEE BENT OVER TO PICK UP STAKE AND CAST PRIMER EMPLOYEE'S RIGHT LEG SLIPPED DUE TO SLIPPERY CONDITIONS DOWN 6.75" BLAST HOLE.

EE WAS CLIMBING INTO CAB OF MOTOR GRADER EE LOST HER FEETING ON STEPS AND HER HANDS SLIPPED FROM HAND RAILS CAUSING HER TO FALL TO GROUND.

EMPLOYEE SLIPPED ON ICE AND LOWER LEFT LEG STRUCK BLADE OF 166 MOTOR GRADER.

54730 ASSIGNED AS LABORER AT THE PRE?G? POND.SLID ON PLASTIC LINER AND RAN INTO 3/8" STEEL CABLE UTILIZED TO HOLD NETTING IN PLACE.

35199NG AND ASSISTING IN MOUNTING TIRES IT SPUN OUT HIT BY THE BEAD BREAKER

EMPLOYEE WAS ADJUSTING SKIRTING ON CONVEYOR BELT. HE NOTED A DIRT BUILDUP ON A RETURN IDLER AND ATTEMPTED TO DISLODGE IT BY STRIKING THE IDLER WITH A HAMMER. THE HAMMER WAS DRAWN BETWEEN THE I DLER AND BELT AND PULLED HIS HAND INTO IDLER.

CLEARING CRUSHER PLUG. EMP SLIPPED ON WET SURFACE FELL ON DECKING

EMPLOYEE WAS OPERATING 85 TON HAULAGE TRUCK. A LARGE ROCK FLOPPED AGAINST THE SIDE OF THE BED JOSTLING THE EMPLOYEE SEATED IN THE TRUCK CAB.

USING BAR TO CLEAN HOPPER PNCHED HAND BETWEEN HOPPER AND BAR

VICTIM HAD LOADED A D7 DOZER ON TO A TRANSPORT. HE LEFT THE DOZER BLADE IN THE UPRIGHT POSITION TO BE ABLE TO CHAIN DOWN THE FRONT OF THE DOZER. AS HE WAS PERFORMING THIS TASK, THE DOZER OPE RATOR ENTERED THE CAB AND ACCIDENTLY HIT THE CONROL ARM CAUSING THE DOZER BLADE TO DESCEND. DOZER BLADE HIT THE VICTIM ON THE BACK FORCING HIM TO HIS KNEES.

EMPL CUTTING FLAT PLATE WITH TORCH. REMOVED GLOVE TO SHUT OFF TORCH.ACCIDENTLY LEANED AGAINST CUT PIECE OF PLATE.THE PLATE FLIPPED UPWARD AND EMPL NATURAL REACTION WAS TO PUT HAND UP TO BLOCK THE STEEL PLATE FROM HITTING HIM. THE HOT PLATE CAME INTO CONTACT WITH OUTSIDE OF LITTLE,RING AND MIDDLE FINGER LEFT HAND.

EMPLOYEE WAS CLIMBING LADDER AT LADDER. HIS HAND SLIPPED ON LADDER AND EMPLOYEE FELL AND LAND ON HEEL OF LEFT FOOT.

WHILE EMPLOYEE (#1) WAS OBSERVING ANOTHER EMPLOYEE (#2) HAMMERING THE REMOVAL OF A SHANK GUARD EMPLOYEE #1 WAS STRUCK BY A SMALL METAL CHIP FROM THESHANK GUARD

FELL FROM PLANK AND LADDER/PLANK BETWEEN LADDER AND OUTSIDE WALL,LADDER GAVE WAY WHILE PAINTER WAS PAINTING DRYWALL.PAINTER FELL APPROXIMATELY 12' BREAKING SMALL BONE OF LEG BELOW KNEE.

WHILE THE EMPLOYEE WAS CLIMBING ONTO THE HAULTRUCK, THE EMPLOYEE PULLED HIMSELF UP ON THE LADDER AND INJURED HIS SHOULDER.

EMPLOYEE AFTER GREASING FORK SECTION OF FORKLIFT PUSHED THE FORK ACROSS THE GREASED AREA WHEN THE EMPLOYEES FINGER WAS PINCHED BETWEEN THE FORK AND MAST.

EMPLOYEE WAS MOVING A DESK WHEN SHE STUMBLED AND HIT HER CHIN ON THE DESK.