Kaycee Mine Metal/Non-Metal

EE was cleaning out a scraper bowl when they slipped and fell backwards into the bowl. EE was waiting on a doctor's appointment for follow up. EE is now on injury leave awaiting further tests and treatment.

EE was removing a pin from the broken bail of a scraper. EE slipped and fell appx eight feet to the ground.

EE was washing out a loader engine deck. EE descended ladder, slipped on the cab step that was covered in wet bentonite and oil, and fell on their right hip/side. EE injured their right hip area and neck.

Employee was trying to dislodge a rock from between discs on tractor and used a hammer and a screwdriver. Employee hit the top to their left hand with the hammer when the rock broke free.

Employee was ripping rock with a dozer, when the dozer tracked over a rock and dropped. The employee's back started hurting, and they called their supervisor and went home for the day to go see a doctor. Employee has seen a doctor but states they have not gotten their paperwork from the doctor yet 07/25/2022

Employee was exiting 627G Scraper when they missed a step while descending. Employee fell backwards and landed on their lower back area and hips.

Employee was operating a scraper, transferring bentonite and ran over a large rock on the edge of the haul road. The resulting impact from rolling over the rock jarred and strained the employees lower back.

Employee was driving a field tractor when the right tire smacked into a concrete barrier employee headbutted the steering wheel getting a cut on forehead

EE lifted a cutting edge to install on a 627G scraper and twisted lower back. He felt pain then and for the next few days before going to a Chiropractor on 06/03/2013 who told him bone spurs prevented proper alignment of the back. He is going to another doctor today, 06/10/2013 for further diagnostics. He is currently off work.

EE was cutting metal with an abrasive saw when a piece of metal passed by his face shield and glasses and embedded in his eye. He thought it might extract itself but he eventually went into emergency room to have it removed the next day. It was a mild embedding and was quickly extracted by the doctor. There will be no lost time from this accident.

The employee was involved in push-pull scraper operation. He was in 2nd scraper and hooked to 1st scraper with the bale. The 1st scraper moved forward causing the 2nd scraper to unhook which caused it to drop down hard, causing a trauma of compression to the center of lower back.

pressure trauma lead to sprained lower back and neck

At 4:45 a.m. the driver entered loader put on seat belt and proceeded to load his trailer. He noticed that he was close to the embankment. That's when the edge gave way and the loader slid down the edge and laid over on it's left side. The driver was bounced around in the cab but needed no medical treatment at that time. Later EE went to the Doctor and was checked over.

EE was barring track onto dozer, felt discomfort in lower stomach. He thought it was pulled muscle and waited a few days to see if it got better - it did not. He went to doctor on 02/27/2011 to confirm it was a hernia which will require surgery. No lost time as yet.

EE was cutting hinge off right loader door. He was cleaning weld off with grinder when it kicked back and deeply cut left arm several inches above the wrist. He went to emergency room to have it cleaned and stitched up.

EE ran over a large rock while operating a scraper which caused him to pull groin muscle in right leg. He expects to return to work on 02/23/3009.

Operating scraper over rough terrain and strained lower back.

EE hit a bump while running scraper and felt pain in upper back near his shoulder. There was a stinging sensation when he would look to his right.

Driving down road at speed during plowing operations, hit a bump, causing his face to strike steering wheel. He sustained bruises - missed 2 days work.

While stepping down out of trailer van, the wind caught van door and slammed it around against employee, knocking him to the ground. He sustained trauma to the right knee and leg by way of bruising and abrasions. He went to emergency room at hospital and had x-rays, which do not reveal any fracturing. Leg was wrapped in a soft-brace, therapy and several days lost time.

Employee was under rear push block of scraper when he attempted to stand up without first clearing it. He hit his lower back on the block, receiving some trauma.

Employee slipped off step while in process of starting scraper engine and herniated a disk in lower back when landing.

Ee drove Cat 627F scraper down hill into pit, as left tire dropped into pit, the operator was slammed against left side of cab, bruising his side and kidney area. He went to doctor the following afternoon due to some blood in his urine. He was instructed to take 5 days off to ensure that he would be ok.

EE WAS HELPING MECHANIC MOVE AN ENGINE BLOCK FROM ONE TRUCK TO ANOTHER WHEN HE PINCHED THE TIP OF HIS RIGHT PINKY FINGER BETWEEN THE TRUCK BED AND ENGINE BLOCK, CAUSING IT TO BE SEVERED ABOUT HALF WAY THROUGH THE FINGER NAIL. HE WAS TAKEN TO THE EMERGENCY ROOM TO HAVE IT SEWN UP.

THE DRIVER WAS GOING DOWN THE HILL ON HAUL ROAD, THE TRUCK BEGAN TO GAIN SPEED. THE BRAKES WERE APPLIED ALONG W/ENGINE BRAKE. THE TRUCK WASN'T SLOWING DOWN FOR THE CORNER AT BOTTOM OF HILL. TH E AIR PRESSURE WAS LOW & THE DRIVER ENTERED THE CORNER TOO FAST. TRUCK LAID OVER ON LEFT SIDE. DRIVER WAS PINNED BETWEEN SEAT & DOOR, RECEIVED CUT ON LEFT CALF & HEAD.

WHILE LAYING ON A CREEPER UNDER A MACHINE, EE REACHED ACROSS TO PICK UP A WRENCH. THE TWISTING MOTION CAUSED HIS BACK TO GO OUT AND IN JAN HE HAD BACK SURGERY TO REPAIR THE DAMAGE. HE HAS HAD PREVIOUS BACK TROUBLE AND SURGERY IN YEARS PAST THE SAFETY OFFICE RECEIVED THE INJURY REPORT ON JAN 18 2002.

EE AND OTHER MAN WERE LIFTING A PARTICALLY FILLED BARREL OF ANTIFREEZE, WEIGHING ABOUT 75 POUNDS, WHEN EE TWISTED HIS BACK.

EMPLOYEE(OPERATOR) HURT HIS BACK WHILE RUNNING DOZER IN A PIT.

WHILE OEPRATING SCRAPER, EE WAS JARRED SOMEWHAT DUE TO ROUGH TERRAIN, CAUSING DISCOMFORT IN HIS LOWER BACK.

WAS DUMPING HIS LOADED SCRAPER WHEN HE DROVE OVER A ROCK AND BOUNCED HARD, HURTING HIS BACK.

WHILE GREASING 627 B SCRAPER, HOOKED HEEL ON ROCK GUARD AND LOST HANDHOLD AT SAME TIME FELL ABOUT 4 FEET AND LANDED ON REAR END. HURT BACK.

RAN OVER LARGE ROCK WHILE OPERATING A SCRAPER. FELT PAIN IN BACK.

FELL WHILE FULING A FUEL TRUCK.

HE WAS DRIVING SCRAPER & HURT NECK & LEFT SHOULDER.

WHILE WORKING ON FRONT END LOADER THE EMPLOYEE SLIPPED ON ICE AND FELL INJURING HIS RIBS.

WHILE RUNNING A SCRAPER THE EMPLOYEE WAS TURNED LOOKING BACK WHEN SOME LARGE ROCKS FELL IN FRON OF THE SCRAPER.THE SCRAPER RAN OVER SOME ROCKS CAUSING A JOLT WHICH CAUSED THE EMPLOYEE NECK PAI N.