While assisting the mechanic make a splice on the miner cable, EE cut his left wrist with a belt knife, requiring 4 stitches.
Liggett #5 Coal
Liggett #5 tiene $736K en multas propuestas de MSHA y $211K pendientes en 31 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Liggett #5.
- Muertes
- 0
- Incidentes totales
- 20
- Años en registro
- 2007–2010
- Último incidente
- Mar 2010
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Liggett #5 tiene $736K en multas propuestas de MSHA y $211K pendientes en 31 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Liggett #5 muestra un polvo respirable de carbon promedio de 0.39 mg/m3 (96% en cumplimiento) en 382 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2010 Q2 | 13,640 | 44 | 16 | 3225.8 |
| 2010 Q1 | 24,641 | 30 | 8 | 1217.5 |
| 2009 Q4 | 27,762 | 29 | 10 | 1044.6 |
| 2009 Q3 | 37,255 | 74 | 20 | 1986.3 |
| 2009 Q2 | 54,665 | 94 | 28 | 1719.6 |
| 2009 Q1 | 46,694 | 34 | 9 | 728.1 |
| 2008 Q4 | 52,401 | 83 | 29 | 1583.9 |
| 2008 Q3 | 53,209 | 119 | 34 | 2236.5 |
Mostrar 6 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2008 Q2 | 52,398 | 48 | 18 | 916.1 |
| 2008 Q1 | 52,148 | 44 | 10 | 843.8 |
| 2007 Q4 | 53,843 | 62 | 15 | 1151.5 |
| 2007 Q3 | 47,980 | 96 | 40 | 2000.8 |
| 2007 Q2 | 45,757 | 47 | 26 | 1027.2 |
| 2007 Q1 | 8,180 | 1 | 0 | 122.2 |
Incidentes reportables
20 en archivo2010 · 1 incidente
2009 · 10 incidentes
Employee was working on the belt line, using a metal bar to change out a roller when the bar slipped hitting him in the mouth.
The time of this incident is unknown, it was discovered on the pre-shift exam. A roof fall was discovered on the 2B beltline at break #6 in an intersection. The fall measured 20' x 30' x 10' high. This beltline is abandoned, therefore, the fall will not be cleaned up. The area has been cribbed and timbered to insure the safety of surrounding areas.
EE was helping lift a metal beam when he lost his grip, causing it to land on his hand. Bruising and swelling occurred, with no broken bones.
A rock fall was discovered during the preshift exam in the last open break in #3 entry of the 001 section. The fall measured 20' x 25' x 8'. The fall has been cleaned up and arches installed for support.
EE was installing roof bolts when a portion of the rib rolled out striking him on the back. Treated and released at hospital with scratches & bruises.
A rock fall was discovered on 5/21/09 by a representative of the company and MSHA inspector on an old panel, 1A panel. The rock fall has been timbered off and dangered off. This is a worked out area.
Injury stated that a rib rolled off on him while scooping section.
Injury was bolting top, when a piece of rock from the rib fell off hitting him and pushing him against the bolt machine. Breaking his right arm and cutting his left arm, that required 12 stitches.
Employee was unloading a box out of scoop bucket when he lost his footing and fell landing on his butt.
As employee was finishing a belt splice, the come-along being used to pull the belt together slipped and struck him in the left shoulder.
2008 · 5 incidentes
Injury was spotting bolts along a rib where sloughing had occured. a rib roll approximately 1'x31/2'x1' hit ee in the left arm and side causing bruising and contusions.
EE was carrying his co-workers dinner buckets and self rescuers when he slipped in the mud and twisted his ankle.
As employee was unloading rock dust from the rail car, the pile of rock dust tipped over and caught his leg between the rock dust and the rail car.
While shoveling the belt, EE was pushing against the shovel with his right knee and experienced pain. After consulting a Dr., it was determined he had a sprain/bruise.
While helping to load a scoop onto a Lo-Boy Trailer, EE stepped on a loose crib block and lost his balance, falling to the ground, approx 24" and struck his left shoulder.
2007 · 4 incidentes
EE was changing a crawler on a Jow 14-15 miner. He was setting a jack when it slipped and mashed his thumb.
Employee was loading a speed reducer in a scoop bucket when he bent down to push the reducer in the bucket and twisted his knee.
A 12' x 20' x 8' rock fall was discovered on 8-15-07 in the #3 left belt. There were no injuries or equipment involved. The area has been cribbed and dangered off.
Employee was operating a roof bolter. He was drilling a hole when a small piece of draw rock fell, striking his left hand and fingers.
The full compliance file on Liggett #5
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.