Employee was pinned between the coal rib and the ripper head of the continuous miner as he was moving the miner from the 2 right crosscut to the 2 left crosscut by radio remote.
Mercer Deep Mine: 1 muerte registrada Coal
Mercer Deep Mine tiene $58K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Mercer Deep Mine.
- Muertes
- 1
- Incidentes totales
- 34
- Años en registro
- 2003–2007
- Último incidente
- Apr 2007
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Mercer Deep Mine tiene $58K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 7 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| WEVA 2005-60 | Settlement | Weisberger | 2005 | $11K → $8K |
| WEVA 2006-652 | Settlement | Bulluck | 2008 | $7K → $5K |
| WEVA 2007-832 | Settlement | Bulluck | 2008 | $362 → $264 |
El muestreo de MSHA en Mercer Deep Mine muestra que 90% de 208 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2007-04-24, hace 19 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.- CONTINUOUS MINER OPERATOR130
- ROOF BOLTER (SINGLE HEAD)25
- SHUTTLE CAR OPERATOR (STANDARD SIDE)24
Sílice (cuarzo)
Última medición: 2005-10-25, hace 20 años- CONTINUOUS MINER OPERATOR11
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2003-09-10, hace 22 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- CONTINUOUS MINER OPERATOR2
- ROOF BOLTER (MOUNTED) (RETURN SIDE)2
- SHUTTLE CAR OPERATOR (STANDARD SIDE)2
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2007 | 55% | 11 |
| 2006 | 90% | 31 |
| 2005 | 95% | 66 |
| 2004 | 89% | 55 |
| 2003 | 93% | 45 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2005 | 5.1 | 5 |
| 2004 | 5.3 | 3 |
| 2003 | 5.2 | 3 |
Mercer Deep Mine registró 1.52 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2006.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2006 | 1.52 | 1.52 | 0.000 |
| 2005 | 5.42 | 0.00 | 0.000 |
| 2004 | 9.00 | 4.50 | 1.501 |
| 2003 * | 14.61 | 8.35 | 0.000 |
- Coastal Coal-West Virginia LLC 2000 a 2003
- Brooks Run Mining Company LLC 2003 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2007 | 28 | 225,435 |
| 2006 | 62 | 801,250 |
| 2005 | 68 | 989,604 |
| 2004 | 73 | 1,061,282 |
| 2003 | 54 | 769,533 |
| 2002 | 0 | |
| 2001 | 0 |
Mercer Deep Mine se ubica en Webster County, West Virginia, donde la categoría minera del Censo representa el 7.2% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 612 | 1 | 0 | 1634.0 |
| 2007 Q2 | 15,598 | 2 | 0 | 128.2 |
| 2007 Q1 | 30,277 | 7 | 1 | 231.2 |
| 2006 Q4 | 25,735 | 4 | 1 | 155.4 |
| 2006 Q3 | 26,577 | 6 | 0 | 225.8 |
| 2006 Q2 | 39,733 | 0 | 0 | 0.0 |
| 2006 Q1 | 39,612 | 8 | 5 | 202.0 |
| 2005 Q4 | 36,132 | 13 | 7 | 359.8 |
Mostrar 19 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2005 Q3 | 35,468 | 14 | 3 | 394.7 |
| 2005 Q2 | 38,141 | 15 | 2 | 393.3 |
| 2005 Q1 | 37,898 | 6 | 1 | 158.3 |
| 2004 Q4 | 33,327 | 9 | 3 | 270.1 |
| 2004 Q3 | 34,300 | 12 | 5 | 349.9 |
| 2004 Q2 | 29,096 | 25 | 7 | 859.2 |
| 2004 Q1 | 36,541 | 23 | 5 | 629.4 |
| 2003 Q4 | 32,762 | 21 | 7 | 641.0 |
| 2003 Q3 | 28,076 | 23 | 10 | 819.2 |
| 2003 Q2 | 30,230 | 26 | 8 | 860.1 |
| 2003 Q1 | 4,750 | 11 | 5 | 2315.8 |
| 2002 Q4 | 0 | 0 | 0 | |
| 2002 Q3 | 0 | 0 | 0 | |
| 2002 Q2 | 0 | 0 | 0 | |
| 2002 Q1 | 0 | 0 | 0 | |
| 2001 Q4 | 0 | 0 | 0 | |
| 2001 Q3 | 0 | 0 | 0 | |
| 2001 Q2 | 0 | 0 | 0 | |
| 2001 Q1 | 0 | 0 | 0 |
Muertes en esta mina
1 registradasIncidentes reportables
33 en archivo (excluyendo las muertes anteriores)2007 · 1 incidente
Employee was retrieving center line laser from the roof bolter when he was struck by falling rock causing a laceration to the left ear. Rock fell between two (2) permanent supports.
2006 · 5 incidentes
A roof fall was discovered on the #4 entry (track) on the North Mains. The fall measured 40' long, 19' wide, and 4.5' thick and occurred due to laminated coal and shale streaks above the 48" full grouted roof bolts. Ventilation and the travel of men were not affected, no injuries or equipment damage occurred as a result of the fall. Fall was 3500' from the working section.
A roof fall measuring 30'long, 19'wide, 6'thick was discovered in the #1 return entry of out bound mains 20' inby spad 56261. Fall occurred due to laminated shale and rock streaks above the 5' fully resin roof bolts. Ventilation and the passage of men were not affected. No injuries or equipment was affected by a result of a fall.
A roof fall occurred in the # 4 entry outby the 001 section at spad 56254 in a 4 way intersection. The fall measured 33' long, 36' wide, and 6' to 7' thick. No equipment or people were affected. Ventilation and the the passage of men was not affected.
Employee was making a belt splice. As he stepped backward without looking, he stumbled upon the 3" water line and twisted his left knee.
Driver had piece of coal hung in tailgate and tried to open it enough to get coal lump out. When he tried to open it, he pushed tailgate pin with his right hand breaking his right thumb.
2005 · 8 incidentes
Employee was setting a rib bolt when the steel stuck, his helper pulled on the steel and the steel came out and struck the small finger of the right hand causing a laceration. The laceration required sutures, employee returned to normal duties on his next shift.
Employee twisted left knee when he stepped from the boom platform to the main bolter platform on the walk thru bolter.
A ROOF FALL OCCURRED IN THE #8 ENTRY OF 001 SECTION, APPROX. 120' INBY SPAD #53978. APPROX. 90' LONG X 6-7' THICK X 18' WIDE.
A roof fall occured in #6 entry approx 50' inby spad #53498 on 2nd north parallel section, approx 50' long, 19' wide, 5 1/2' high.
Employee sought medical treatment on 06/16/05 on the following: Employee was walking from the face to the mantrip in the TRACK ENTRY when he slipped on wet mine floor and twisted his left knee. Employee is currently working in a light duty capacity.
STEPPED OFF OF A FLAT CAR, LEFT FOOT LANDED ON TRACK RAIL CAUSING HIM TO TWIST HIS LEFT ANKLE.
EE WAS DIZZY FROM A VIRUS SLIPPED & FELL ON KNIFE CAUSING A LACERATION TO RIGHT HAND. SUTURES WERE APPLIED.
EE driving H10 coal truck, stopped at old 9A mines to tighten chains up on the truck. He slipped and fell while walking around his truck. He was transported to Brayton Hospital were he was diagnosed with a sprained knee. He will be off from work until 1/24/05.
2004 · 10 incidentes
Employee was struck by a shuttle car cable on the left knee. Employee was hanging cable back to the transformer when slack was taking up on the cable reel causing the cable to whip against the employee.
EE RAISED THE HOOD ON H11 UNIT TO CHECK HIS MOTOR OIL. WHILE LOWERING THE HOOD, EE CAUGHT HIS FOOT IN THE SPOT MIRROR BRACKET AND FELL OFF THE FENDER. HE WAS TAKEN TO THE HOSPITAL AND X-RAYED. HAD SMALL SPRAIN IN LOWER BACK.
I was notified by the employee on 08/26/2004 that he sought medical treatment for the following: Employee was removing a bit from the continuous miner with a pick hammer when a sliver from the hammer chipped and imbedded into the index finger right hand. Employee missed NO days from work
Employee twisted right ankle when he stepped from the walk through bolter to the mine floor. Employee is working restiricted duty
PIECE OF METAL FLAKED OFF OF BRAKE SPIDER WHILE REPLACING BUSHINGS IN IT. THE METAL HIT THE EE IN THE FACE UNDER THE LEFT EYE.
A ROOF FALL WAS FOUND IN THE #2 ENTRY OF RETURN ON 2ND LEFT PANEL, APPRX 50' INBY SPAD #47050. THE FALL MEASURED APPROX 30' LONG, 24' WIDE AND 4 1/2'- 5' THICK. VENTILATION AND PASSAGE WAS NOT AFFECTED AND THERE WERE NO INJUREIES AS A RESULT OF THE FALL. THE PERIMETER OF THE FALL WAS TIMBERED AND DANGERED OFF.
a roof fall occurred on the 001 MMU on the above metioned date. the fall measured 86' long by 20' wide by 5' thick. The fall was located in the #3 entry 1st left off the 5th left panel in the #1 north mains. the fall occurred due to subnormal conditions immediately above the 4' fully grouted resin bolts. Ventilation and passage was not affected.
EE reported that a piece of rock fell from between permanent supports and struck right hand, neck, and shoulders. Employee sought medical treatment. The area was supported with 5' resin bolts.
ON FEBRUARY 23, 2004 EE REPORTED THAT ON 2/19/04 HE STRAINED HIS BACK WHILE LIFTING A BOX OF ROOF BOLT GLUE AND PLACING IT ON THE ROOF BOLTER. HE STARTED MISSING TIME ON 2/22/04.
WE HAD A ICE STORM EARLY THIS MORNING AND DRIVER WAS GETTING OUT OF HIS TRUCK WHEN HE SLIPPED AND FELL TURNING HIS ANKLE. HE A SPRANG ANKLE. TOOK HIM TO BLASTON COUNTY HOSPITAL WHERE HE WAS X RAYED NO BROKEN BONES JUST A LITTLE SPRAIN. WAS SENT HOME AND TOLD TO STAY OFF IT 3 OR 4 DAYS.
2003 · 9 incidentes
EMPLOYEE STATED THAT WHILE TRAMMING TO THE MINER THE SUTTLE CAR STRUCK A POTHOLE IN THE TRAVELWAY CAUSING HIM TO BE JARRED IN THE SEAT. LATER HE COMPLAINED OF TINGLING AND LOSS OF MOVEMENT IN THE RIGHT FOOT. EMPLOYEE IS WORKING IN A RESTRICTED DUTY CAPACITY.
AN UNINTENTIONAL ROOF FALL WAS DISCOVERED DURING AN EXAMINATION IN THE BLEEDER ENTRIES OF THE #4 ENTRY 2ND LEFT PANEL #1 NE MAINS. THE FALL MEASURED 18'LONG X 18'WIDE AND WAS 6'THICK. THE FALL OCCURRED DUE TO A SLIP ABOVE THE 4' FULLY GROUTED RESIN BOLTS. NO PERSONAL INJURIES RESULTED FROM FALL AND VENTILATION AND PASSAGE WAS NOT AFFECTED. THE AREA WILL BE RESUPPORTED & BARRICADED
EE RECEIVED A PUNCTURE WOUND TO THE RIGHT CHEEK AS HE WAS ATTEMPTING TO REMOVE A BIT INSERT WITH A BALL PIN HAMMER. A SMALL SLIVER OF THE HAMMER CHIPPED OFF AS HE WAS BEATING ON THE INSERT.
EMPLOYEE WAS WALKING THROUGH CROSSCUT & A PIECE OF DRAW ROCK FELL STRIKING HIS HEAD, KNOCKING HIM TO THE GROUND, CUTTING HIS HEAD & INJURING HIS RIGHT THUMB & LEFT SHOULDER.
ACCIDENT TOOK PLACE IN A CORSSCUT BETWEEN 6&7 RETURN ENTRY 1ST LEFT PANEL 80' INBY SPAD 46522. EE AND TWO OTHER EE WERE ASSIGNED TO REMOVE KENNEDY STOPPINGS IN THE OLD 1ST LEFT PANEL. AS HE WA S REMOVING THE LAST PANELING FROM THE OLD INTAKE STOPPING A ROCK MEASURING 34" WIDE X 36" LONG X 0"-2" THICK FELL FROMT HE MINE ROOF STRIKING HIM IN THE BACK AREA. HE WAS DIAGNOISED AS HAVING
EE TWISTED HIS LEFT KNEE ON THE 3" FRESH WATER LINE INSTALLED ADJACENT TO THE BELT CONVEYOR. HE WAS WALKING TO THE MANTRIP AT THE TIME.
THE EMPLOYEE WAS REMOVING SMALLER PIECES OF ROCK FROM THE TOP OF THE CONTINUOUS MINER WITH HIS LEFT HAND. WITHOUT WARNING A SMALL PIECE OF SLATE FELL FROM THE ROOF STRIKING THE LEFT HAND. THE ROCK INFLICTED A LACERATION TO THE LEFT THUMB WHICH REQUIRED SUTURES FOR CLOSURE.
ON THIS DATE EE AN EMPLOYEE REPORTED TO MINE MANAGEMENT THAT HE HAS BEEN DIAGNOSED AS HAVING CARPAL TUNNEL SYNDROME. AN EMPLOYEE SINCE 09/12/2001 STATED THAT HE HAS HAD PAIN IN BOTH WRIST WITH LOSS OF GRIPPING STRENGTH. HE HAS WORKED 21 YEARS UNDERGROUND.
EE'S LEFT HAND WAS STRUCK BY SHALE ROCK WHEN THEROCK FELL FROM BETWEEN TWO PERMANENT ROOF SUPPORTS. THE EMPLOYEE WAS GIVING INSTRUCTIONS TO ANOTHER EE TO TAKE THE SERVICE CAR TO THE MINER, THE EE HAD HIS HAND ON THE SERVICE CAR. AS A RESULT OF THE ROCK FALLING A DISTANCE OF 6-7 FT. & STRIKING HIS HAND, EE LOST THE SMALLER FINGER, RING FINGER TO 1ST PROXIMAL, MIDDLE TO DISTAL JOINT.