A mechanic failed to wear appropriate eye and face protection while assisting a welder during welding operations. The mechanic suffered from eye discomfort with no permanent damage.
Mitco Job #12 Coal
Mitco Job #12 tiene $15K en multas propuestas de MSHA y $6K pendientes en 2 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Mitco Job #12.
- Muertes
- 0
- Incidentes totales
- 9
- Años en registro
- 2011–2014
- Último incidente
- Oct 2014
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Mitco Job #12 tiene $15K en multas propuestas de MSHA y $6K pendientes en 2 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Mitco Job #12 muestra un polvo respirable de carbon promedio de 0.11 mg/m3 (100% en cumplimiento) en 31 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2014 Q4 | 10,342 | 7 | 1 | 676.9 |
| 2014 Q3 | 14,809 | 0 | 0 | 0.0 |
| 2014 Q2 | 16,331 | 15 | 3 | 918.5 |
| 2014 Q1 | 13,993 | 4 | 1 | 285.9 |
| 2013 Q4 | 14,968 | 33 | 9 | 2204.7 |
| 2013 Q3 | 7,477 | 8 | 1 | 1069.9 |
| 2012 Q1 | 639 | 0 | 0 | 0.0 |
| 2011 Q4 | 12,488 | 2 | 1 | 160.2 |
Mostrar 6 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2011 Q3 | 14,781 | 5 | 4 | 338.3 |
| 2011 Q2 | 14,249 | 8 | 5 | 561.4 |
| 2011 Q1 | 13,192 | 0 | 0 | 0.0 |
| 2010 Q4 | 11,990 | 4 | 3 | 333.6 |
| 2010 Q3 | 4,868 | 7 | 3 | 1438.0 |
| 2010 Q2 | 4,238 | 4 | 3 | 943.8 |
Incidentes reportables
9 en archivo2014 · 4 incidentes
An employee was working on wet uneven ground located near the highwall miner pit. As the employee began rolling the fuel hose into the rear section of the 2003 Peterbilt fuel truck he attempted to kick the fuel hose to help guide the hose into the hose reel. This twisted him around causing him to loose his footing and fall to one knee, resulting in an injury to his back.
The employee was performing duties that consisted of welding and the use of cutting torches while wearing protective equipment in temperatures ranging between 85 and 90 degrees.
Hydro-seeding in 90 degree temperatures. Employees duties required him to climb up and down steep slopes, while dragging a 2 inch hydro-seeding hose. The employee had consumed little to no water when he initially became dizzy and disoriented. During transportation to the hospital the employee passed out.
2013 · 3 incidentes
During the removal of the stick jack on a PC300 Komatsu excavator, an oring seal failed releasing hydraulic oil pressure which struck the mechanic in the left forearm. This resulted in bruising and swelling of the injured area. After X-rays and a medical examination it was determined no fluid had entered the skin.
While observing the installation of the master link in the highwall miner belly chain, a small piece of metal broke loose and struck EE in the right forearm. Resulting in a small laceration and the embedding of the foreign object. EE treated at the Hospital with a tetanus shot and a prescription anti-biotic.
Due to the buildup of material in the catchment bench, a Komatsu PC300 excavator was being used to remove material and buildup the outer berm. The PC300 lost control of a large rock that traveled approximately 600' downhill and passed through a mobile home. The home was damaged beyond repair. The occupant was bruised up after falling through the floor.
2011 · 2 incidentes
Driving a pin in miner and piece of metal chipped off causing f/b in left arm.
Moving Highwall Miner Cable and got tangled in cable. Fell & strained back.
The full compliance file on Mitco Job #12
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.