Ramseytown Mine Coal

EE WAS LOADING SUPPLIES ON BOLTER HURT BACK

EMPLOYEE WAS STACKING A BELT STRUCTURE, WHEN IT FELL AND STRUCK HIM ON TIP OF FOOT.

EE WAS ROOF BOLTING GOT FOOT UNDER BOLTER SET HEAD DOWN ON FOOT BRUISING FOOT.

ROOF FALL FIRST RT OFF B2 LEFT IN #18 ROOM FOR ABOUT 250 FEET IN RETURN.

RUNNING SCOOP RAN OVER ROCK, BUMPED HEAD ON ROOF.

EE HAS HAD A REOCCURANCE FROM 7/28/98. EE HURT HIS KNEE WHILE CRAWLING ON WET BOTTOM

EE WAS CRAWLING ON HIS KNEES ALL DAY AND AT THE END OF THE SHIFT HE HAD PAIN & SWELLING IN HIS KNEES

MOVING BOLTER FROM LEFT TO RIGHT.

VICTIM WAS STRUCK IN EYE WITH PIECE OF ROCK, SCRATCHING EYE.

WET BOTTOM VICTIM CRAWLING HURT KNEE.

EE WAS LIFTING A PIECE OF STEEL FELT PAIN IN BACK.

WHILE INSTALLING 4' ROOF BOLT THE 8X8 ROOF BOLT PLATED SLID DOWN ROOF BOLT CUTTING INJURED ON THE LEFT WRIST CAUSING AN INCISION OF ABOUT 3/4" REQUIRING 3 STITCHES.

INJURED PULLED MUSCLE IN BACK PULLING ON A SECTION OF BELT.

IN THE PROCESS OF MOVING A LOW LO. BELT DRIVE A 4" WATER LINE HAD TO BE PUT UP AGAINST THE ROOF WHILE LIFTING THE WATER LINE, INJURED PULLED A MUSCLE IN HIS BACK.

WHILE WORKING ON A SCOOP- HE PULLED A MUSCLE ON HIS RIGHT KNEE.

WHILE PULLING A ROCK DUSTER WITH A TRACTOR HE PINCHED HIS FINGER BETWEEN THE TONNOG OF DUSTER AND TRACTOR.

EMPLOYEE WAS TAKING BOLTS OUT OF AN AUGER WITH A HALF INCH DRIVE SOCKET ON A 3/4-1/2 REDUCER WITH A BREAKER BAR AND A PIECE OF PIPE ON IT. THE SOCKET BROKE AND A PIECE FLEW UP AND HIT HIM ON T HE CHIN.

WHILE INSTALLING DRILL STEEL INTO ROOF A STEEL SLIPPED CATCHING HIS FINGER CAUSING A LACERATION.

WHILE PULLING DOWN A PIECE OF DRAW ROCK ALONG TRAVELWAY, A PIECE OF ROCK HIT HIS RIGHT HAND CAUSING A CUT.

WHILE OPRATING A ROOF BOLTER, A SMALL PIECE OF DRAW ROCK FELL CUTTING HIS RIGHT WRIST.

WHILE UNLOADING CRIBBING AND CAP PIECES FROM A SCOOP BUCKET, HE THREW A BUNDLE OF CAP PIECES, PULLING A MUSCLE IN HIS LOWER BACK.

WHILE INSTALLING 6' ROOF BOLTS, HE WAS STRAIGHTENING A ROOF GOLT WHEN IT SLIPPED CATCHING HIS LITTLE FINGER BETWEEN THE BOLT AND THE DRILL CHUCK ON THE ROOF BOLTER.

WHILE PREFORMING A PRESHIFT EXAMINATION OF SECTION 002 OF THE RAM SAL TOWN MIN.E THE MINE EXAMINER NOTICED INADADATED AIR AMOUNT. UPON FURTHE INVESTIGAITON. HE FOUND A ROOF FALL IN TEH RETU RN OF THE 1ST LEFT BUTT APPROX 750' OUTBY THE FACE AREA. THE FALL EXTENDED APPROX 200'LX12'H.

WHILE BUILDING SHELVES FOR IN SHOP, BOARD FELL WITH A NAIL IN IT, HE STEPPED BACK ONTO THE NAIL.

WHILE INSTALLING A ROOF BOLT, THE BOLT KICKED SIDEWAYS WHILE STRAIGHTENING IT, HITTING HIS FINGER.

WHILE WALKING DOWN A SET OF STEPS OUT OF THE SUPPLY TRAILER ON THE SURFACE, HE SLIPPED FALLING ON RIGHT ELBOW. JAMMING HIS RIGHT SHOULDER.

PROBABLE CARPAL TUNNEL SYNDROME.

WHILE INSTALLING ROOF BOLTS A PIECE OF ROCK BROKE OFF BETWEEN THE ROOF BOLTS HITTING HIM ON BACK AND NECK.

EE WAS WELDING AS HE WAS CHIPPING SLAGG OFF OF THE WELD, WHEN A PIECE FLEW AND HIT HIM IN THE LEFT EYE. HE WAS WEARING SAFETY GLASSES AT THE TIME OF THE ACCIDENT.

WHILE INSTALLING A ROOF BOLT HE WAS PUSHING THE ROOF BOLT TO STRAGITHEN IT OUT, SAID HE FELT A POP IN HIS CHEST. PULLED A MUSCLE.

WHILE INSTALLING ROOF BOLTERS, HE HIT HIS KNEE AGAINST THE ROOF BOLTER. * DID NOT KNOW WHEN HE WENT TO THE DOCTOR.

WHILE TIGHTING UP LOW BELT TAIL, THE JACK HANDLE SLIPPED.

EMPLOYEE WAS GRINDING A PIECE OF STEEL TO BE WELDED WHEN A PIECE OF DIRT FLEW BEHIND HIS SAFETY GLASSES AND WENT IN HIS EYE.

WHILE PULLING LOW BELT TAIL WITH SCOOP, CHAIN ONTIGHT SIDE BROKE, SPINNING THE TAIL CLOCKWISE 1980 DEGREES. VICTIM WAS ON WIDE SIDE OF BELT AWAYFROM THE TAIL AND BELT, IN FRONT OF MINER. TAIL CAME TOWARD VICTIM. HE JUMPED OUT OF WAY INTO MIER WHICH WAS NOT IN USE AT THE TIME, CAUSING INJURY TO THE VICTIM.

EMPLOYEE WAS PUTTING AN EXHAUST CURTAIN UP TO MINE THE #2 ENTRY HE WAS PUTTING THE CURTAIN UP BETWEEN 2 & 1 ENTRY AT THE CORNER OF A X-CUT, WHEN A PIECE OF ROCK CAME DOWN PINNING HIM TO THE BO TTOM.

EE WAS WELDING. HE WAS CHIPPING SLAGG OFF OF THE WELD WHEN A PIECE FLEW AND HIT HIM IN THE LEFT EYE. HE HAD HIS SAFETY GLASSES.

EMPLOYEE WAS INSTALLING A 4' BOLT WITH A 6"X6" PLATE. HE REACHED UP TO STRAIGHTEN THE PLATE WHILE PUSHING UP ON THE BOLT. HE FAILED TO GET HIS FINGER FROM BETWEEN THE BEARING PLATE AND ROOF.

EE WAS DISASSEMBLING A JACK ON A SCOOP WHEN IT SLIPPED. THE MIDDLE FINGER WAS BETWEEN THE BACK AND THE FLOOR. THE FINGER SWELLED UP.

WHILE CRAWLING ALONG LO-LOW BELT--EE TWISTED HIS KNEE

PLACING A RAIL ON TOP OF THE MINER THAT RAIL ROLLED OVER ONTO HIS FINGER.

WHILE OPERATING A KERSEY TRACTOR IN MUDDY CONDITIONS - THE STEERING WHEEL CAME LOOSE FROM HIS HAND STRIKING HIS LEFT HAND CAUSING A BRUISE.

WHILE OPERATING A ROOF BOLTER, HE MOVED TO GET OUT OF THE WAY OF PIECE OF FALLING ROCK AND TWISTED HIS BACK.

WHILE PLACING A 2" WOOD BLOCK UNDER A 5X7 CROSSBAR--A 3X5 WOOD PLANT ROLLED ONTO HIS ARM

WHILE WALKING IN VERY MUDDY CONDITIONS, I TWISTED MY KNEE WHEN FOOT WAS STUCK IN MUD.

THE MOBILE BRIDGE OPERATOR SHUT THE LO BELT OFF AND CRAWLED ACROSS IT. WHILE CRAWLING ACROSS, HE TWISTED HIS LOWER BACK. CONDITIONS WERE WET AND MUDDY.

WHILE WALKING TOWARD THE OUTSIDE OF THE MINE--HE WALKED INTO THE 18" FIBERGLASS AIR TUBING WHICH IS USED TO VENTILATE THE ENTRY IN WHICH HE WAS WORKING.

WHILE PERFORMING MAINTENANCE ON A SHUTTLE CAR HE SHUT OFF THE SHUTTLE CAR BY MEANS OF THE PANIC BAR WITH HIS HAND RESTING ON IT,NEXT TO THE AUTOMATIC BRAKE THE HANDLE ON THE BRAKE CLOSED HITTI NG HIM ON THE FINGER.

WHILE PLACING CRIBBING & HEADER BLOCKS ABOVE RAILS BEING SET TO SUPPORT THE ROOF IN #1 ENTRY, HIS HAND WAS RESTING ON A RAIL WHEN A PIEACE OF ROCK APPROX 12" X 18" X 5" IN SIZE FELL, CAUSING I NJURY TO HIS RING FINGER OF THE LEFT HAND.