Rental-Gray Hawk 3054 Jaw Crusher: 30 citaciones de la MSHA Metal/Non-Metal

A ground person was assisting the operator of a skid steer in a task that required the ground person to hold power cords up and away from travel way of skid steer. Skid steer oper. toured sharply to the right causing rear left co new to come in contact with ground person right forearm causing it below the elbow

WHILE ASSISTING TO FREE AN OVERSIZED ROCK IN THE PLATE FEEDBOX AT PRIMARY CRUSHER, HIS FINGERTIP WAS PINCHED BETWEEN CHISEL AND SIDE OF FEEDER WHEN THE STONE CAME LOOSE.

OPERATOR WAS IN THE PROCESS OF SHUTTING DOWN PIECE OF EQUIPMENT WHEN HE SLIPPED ON A SNOW COVERED ICED OVER SUPPORT IRON FOR CLUTCH ASSEMBLY STRIKING HIS LEFT SHOULDER.

INTHE PROCESS OF CUTTING THE SPLICE OUT OF A CONVEYOR BELT, EE USING A UTILITY KNIFE CAME OUT OFBELTING & STRUCK INNER PART OF LEFT FOREARM. EE LOST NO TIME

WHILE ASSISTING INSTALLATION OF PITMAN ASSEMBLY INTO CRUSHER FRAME, IT BECAME NECESSARY TO USE A PORTA POWER AS HYDO JACKING DEVICE. THIS DEVICE WAS BRACED AGAINST HIS CHEST AND WITH JACKING M OTIBAS WITH ARMS, THE PROJECT COMPLETED. THIS JACKING MOTION MAY HAVE STRAINED MUSCLE IN AREA NEAR HIS HEART.

OPERATOR WAS DECENDING A PRIMARY CRUSHING UNTI AND MISJUDGED WHICH LADDER STEP HE WAS ON HE WAS ON THE SECOND FROM LAST STEP BUT THOUGHT HE WAS ON THE LAST, HE FELL BACK TO THE GROUND JAMMING HIS LEFT THUMB AND WRIST.

DAMP MATERIAL CLINGING TO CONVEYOR BELTS AND DROPPING TO GROUND. THIS MATERIAL WAS BEING REMOVED FROM UNDER CRUSHER WITH A FLAT FACED SHOVEL. EMPLOYEE BEGAN TO FEEL PAIN IN LEFT SHOULDER BLADE - RECEIVED MUSCLE STRAIN.

WHILE STEPPING DOWN FROM PLATFORM DESIGNED FOR CHECKING OIL ON VME 270 WHEEL LOADER, OPERATOR PLACED FOOT ON CABLE STYLE STEP WITH LEFT FOOT & TO THE GROUND WITH RIGHT FOOT. RIGHT FOOT CONTACT ED UNEVEN GROUND TURNING ANKLE OUTWARD & CAUSING EMPLOYEE TO FALL TO THE GROUND.

WORKING ON A BEARING ON A BOOT PULLEY & WRENCH SLIPPED & HIT HAND ON PULLEY

HE WAS WORKING ON THE CRUSHER WHEN A BAR HE WAS PUTTING IN PLACE SLIPPED AND HIT HIM IN THE HEAD.

WAS WORKING ON HIS PLANT AT THE SHOP. AS HE WAS COMPING DOWN THE LADDER, THE LADDER SHIFTED AND CAME OUT FROLM UNDERNEATH HIMCAUSING HIM TO FALL TO THE GROUND LANDING ON HIS SHOULDER. HE MAY HAVE A TORN ROTATOR CUP.

PULLING ON WRENCH DURING REPAIR ON CRUSHER.

SLIPPED ON A ROCK AND FELL ON LEFT ELBOW.

HE WAS STANDIN D ON CRUSHER WHEN HE SLIPPED AND FELL HITTING HIS CHEEK ON METAL BAR

I.NAME WAS POUNDING OUT SCREENS ON THE CRUSHER WHEN HE EXPERIENCED SORENESS IN HIS ARM. IT CONTINUED TO GET WORSE DURING THE COURSE OF THE DAY UNTIL HE DECIDED TO GET IT CHECKED.

OVERALLS WERE CAUGHT IN CONVEYOR ROLLER WHICH THEN PULLED HIS HAND INTO THE CONVEYOR ROLLER RESUTLING IN THE INJURY.

WHILE I.NAME WAS POUNDING OUT SCREENS HE EXPERIENCED A SORENESS IN HIS NECK WHICH INCREASINGLY GOT WORSE AND TRAVELED DOWN HIS ARM AND INTO HIS HAND.

WHILE POUNDING OUT THE SCREENS HIS ELBOW HIT A CORNER OF THE VIBRATING SCREEN DECK.

SECONDARY CRUSHING UNIT REPAIR WAS BEING PERFORMED WHICH INVOLVED CUTTING A PIECE OF CONVEYOR BELTING TO BE USED AS A STONE GUARD.DURING THE PROCESS THE EMPLOYEE SLIPPED WHILE PUTTING DOWNWARD PRESSURE UPON THE UTILITY KNIFE.THE KNIFE PUNCTURED HIS LEG AND BROKE OFF WITHIN HIS LEG.