Buscar en el registro

Employee was stacking 100 lb. bags of sand and twisted and wrenched his lower back.

Employee was moving a portable generator and hurt his back.

Employee leaned against a railing and the railing broke loose and employee fell into a bin that is not longer in use.

Lifting buckets of sand (80-100 lbs)

Employee was bagging 100 lb bags and pulled a muscle in his lower back.

Employee slipped on the ice, fell on his back and hit his head.

Employee slipped and fell on his left knee which landed on a hydraulic pipe just below the knee cap.

Employee slipped on the ice and hurt his right arm on 2/12/07. On 3/19/07 he swung a hammer and arm started hurting again so he went to the doctor.

Employee smashed his right pinky finger between trummel liner & metal bar.

Cylinder came through back windo on dump truck and glass got in his eye.

Machine he was operating fell 2 inches and stopped abruptly causing his lower back to be jarred.

Employee was rolling 100 lbs (plus) rocks away from equipment.

Pressure washing dump truck, splashed debris up in eye.

EMPLOYEE SMASHED RIGHT RING FINGER IN BACKHOE DOOR JAM.

FOOT SLIPPED ON A WET FLOOR AND GOT PINNED UNDER BULK HEAD OF RAIL CAR.

EE WAS WELDING AND A PIECE OF SLAG GOT IN HIS LEFT EYE

EE WAS PULLING NAILS OUT OF A BOARD & THE NAIL CAME UP & ENTERED THE EE'S RIGHT EYE.

TRIPPED OFF CAT TWISTED LEG, CRACKED KNEECAP.

WAS RUNNING A CHAINSAW, OTHER EE WAS RUNNING THE BACKHOE AND HIT EE WITH THE BUCKET ON THE BACKHOE.

PULLED MUSCLES IN BACK FROM STACKING BAGS OF SAND.

STEPPED WRONG & TWISTED KNEE.

EMPLOYEE WAS LIFTING 100 LB BAGS OFF THE FLOOR.

LIFTING BAGS OF SAND

EMPLOYEE SLAMMED RIGHT THUMB IN BACKHOE DOOR.

EMPLOYEE WAS LIFTING A FUEL TANK AND PULLED MUSCLES IN HIS BACK.

EE WAS OPENING A 55 GALLON DRUM AND CUT HIS LEFT HAND. 6 STITCHES IN THE PALM OF HIS HAND.

ICE AND MUD

EE WAS REPLACING A CLUTCH RELEASE ARM ON A PICK-UP AND GOT BRAKE FLUID IN HIS RIGHT EYE.

EE WAS PRESSURE WASHING THE FORK LIFT AND BENT OVER WRONG AND PULLED MUSCLES IN HIS BACK.

CONSTANT WELDING CAUSED CARPAL TUNNEL SYNDROME IN RIGHT HAND.

STEPPING OUT OF TRUCK EE STEPPED ON A ROCK AND TWISTED RIGHT ANKLE.

CHIPPING METAL SLAG AND A PIECE OF SLAG LANDED IN RIGHT EYE.

EE WAS BUILDING FENCES AND A BAR THAT WAS LEANING AGAINST A BRACE FELL AND HIT EE IN THE FACE.

EMPLOYEE WAS CLIMBING UP INTO LOADER, WHEN HE SLIPPED AND HIT HIS HEAD.

MOVING A PIECE OF WOOD(FELL ON RIGHT WRIST)

GRINDING OFF A PIECE OF METAL. PIECE FLEW OFF AND LANDED IN EYE.

EMPLOYEE WAS PICKING UP A 100 LB. BAG AND THREW IT UPON A PALLET AND IT FELT LIKE A PULLED MUSCLE.

WHILE MOVING A TIRE A 12-2400 WHEEL FELL OVER ON FOOT.

PRYING ON CAT TRACK WITH 6FT PRY BAR, WHEN FELT SHAPR PAIN IN GROIN AREA. RESULTING WITH HERNIA ON RIGHT SIDE.

TORQUEING SPROCKET SEGMENTS, TORQUE WRENCH BROKE, EE FELL TO GROUND.

LIFTED A 100LB BAG AND THREW IT ON THE PALLET.

WELDING FLASH REFLECTED OFF SHINY METAL IN SHUTE

BENT OVER WORKING

FELL ON CEMENT, LANDED ON KNEE.

FELL ON ICE, TWISTED KNEE.

LIFTING ROTEX SCREENS OUT & CLEANING THEM.

EMPLOYEE WAS TESTING A CONTROL BOX FOR #3 BLOWER WITH HIS PERSONAL ELECTRICAL TESTER WHICH WAS SET ON OHMS SO WHEN HE TOUCHED THE WIRE IT BURNED HIS HANDS.

EMPLOYEE WAS PACKING SHOT FROM JIG BED TO OUTSIDE WITH TWO BUCKETS WEIGHING APPROX 60 LB EACH AND THREW HIS BACK AND HIP OUT.

USE OF TEN-KEY AND COMPUTER.

EMPLOYEE WAS SITTING DOING BENCH WELDING & A WELD BLOB FELL OFF THE TABLE & BURNED THREW HIS APRON