Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee moving drill strained back.
Employee was splitting granite block with feathers and wedges upon splitting the piece of stone employee was standing on shifted unexpectedly causing employee to loose balance falling forward onto adjacent piece of granite causing abrasions to both knees and right elbow.
Uneven floor in the area employee was injured. Loose gravel, slipped and fell, injured elbow while trying to break the fall.
While starting a new hole 33mm before the drill bit broke into the surface of the rock EE shifted weight and in doing so let off on down pressure and the drill steel bounced out of the bit and the tip of the steel went into EE's boot behind safety toe at tongue area between the laces and caused a small cut of the skin.
EE DROPPED A PIECE OF DUNNAGE ON HIS FOOT.
WHILE SPLITING A BLOCK WITH WEDGES IT OPENED CAUSING HIM TO LOSE HIS BALANCE AND FELL. THE END OF THE WEDGE PUNCTURED HIS LEG.
WHILE MOVING BURNER MAST ASSEMBLY THE MAST TIPPED FOREWARD CATCHING FINGER BETWEEN RAIL & ROLLER
DRY GROUND- SHE WAS WALKING DOWN DRIVEWAY TO PUNCH IT AND SLIPPED AND FELL.
EE WAS ON TOP OF COMPRESSOR PUTTING FUEL IN IT WHEN HE STEPPED BACK STEPPING OFF THE COMPRESSOR LANDING ON HIS BACK.
EE WAS GRINDING STEEL ROD ON GRINDING WHEEL. HIS GLOVE WAS CAUGHT IN WHEEL AND CUT HIS HAND.
THE EE WAS DISEMBARKING HIS LOADER WHEN HE FELL ONTO HIS RIGHT LEG. THE EE COMPLAINED OF A STRAIN TO HIS HAMSTRING AND LOWER BACK.
WHILE RUNNING HIS DRILLING RIG THE EE NOTICED HIS DRILL SPEED WAS TOO SLOW. HE ATTEMPTED TO REPAIR THE DRILL BUT DID NOT SHUT OFF THE AIR. HIS GLOVE GOT CAUGHT ON THE DRILL ROD AS IT SPEED UP. THIS CAUSED HIM TO TWIST HIS HAND AROUND THE DRILL ROD PULLING LIGAMENTS AND CUTTING HIS LEFT HAND SUPPORT FINGER.
THE LOADER OPERATOR WAS MOVING A PIECE OF STONE IN FRONT OF THE EMPLOYEES DRILLING RIG. THIS DISLODGED A PIECE OF STONE ON WHICH ONE OF THE LEGS WAS SITTING CAUSING THE DRILLING RIG TO FALL OV ER. WHILE FALLING OVER THE DUST COLLECTOR CAN HIT THE EMPLOYEE AROUND THE RIGHT SCAPULA.
EMP WAS KNOCKING A BIT ONTO A DRILL ROD. RAISED THE ROD TO HIT IT ON THE GROUND. WHEN HE KNOCKEDTHE ROD ON THE GROUND HE PINNED HIS FINGER BETWEEN THE ROD AND THE GROUND. THE EMP HAD TWO ABRAS IONS ON RIGHT HAND MIDDLE FINGER. HE REQUIRED NINE STITCHES.
EMP WAS SETTING HIS TAMROCK MONO DRILL GUIDE HYDRAULIC DRILLING RIG. ONE OF THE LEGS WAS SET ON TOP OF A ROCK. EMP TRIED TO PULL THE ROCK OUT AND THE LEG FELL ON HAND. HE RECEIVED A LACERATION ON LEFT HAND THIRD FINGER WHICH HAD TO BE STITCHED. FOURTH FINGER HAD A SMALL ABRASION AND SOME SWELLING.
EMP WAS STARTING A DRILL HOLE WITH HIS DRILLING RIG. PIECE OF ROCK CAME UP UNDER SAFETY GLASSES AND IMBEDDED ITSELF ON EYEBALL AT CORNEA REGION. THIS LEFT AN ABRASION ON CORNEA OF LEFT EYE.
EMP PLACED BOTH HANDS ON EDGE OF ROCK TO LOOK UP ON TOP OF THE ROCK TO INSPECT THE BLOCK. AS HE LIFTED HIMSELF ONE CORNER GAVE WAY AND HIS CHEST HIT BLOCK.
INJUREY
EMP WAS PUTTING A NEW BIT ON 24' DRILL STEEL. INDOING SO HE HELD BIT WITH RIGHT HAND AND DRILL STEEL IN LEFT HAND HITTING STEEL AND BIT DOWN SLIGHTLY. HE PUT FINGER BETWEEN BIT AND SURFACE CAU SING FINGER TO BE BROKEN.
USING UTILITY KNIFE CUT PIECE OF WOOD TO GET OUTA DRILL BIT. WHILE SHARPENING A STICK, EE CUT LEFT FOREARM WITH UTILITY KNIFE
EMPLOYEE WAS OPERATING A HAND HELD JACKHAMMER FOR APPROXIMATELY 4 TO 5 HRS THE DAY OF INJURY. AT 1:00 HE TOLD THE SUPERVISOR HIS WRIST WAS VERY SORE, BUT HE SAID HE COULD CONTINUE. ON 4-3-96 H E SAID HIS WRIST WAS STILL SORE. THE SUPERVISOR ASSIGNED HIM NOT TO DRILL BUT PRESSURE WASH EQUIPMENT.
LIFTING A DRILL STEEL APX 65 LBS AND HE STRAINED A MSUCLE IN HIS BACK. HE REPORTED HIS PAIN TO HIS LEAD MAN SEE ANNEX 1.
EMPLOYEE DISCONNECTED AIR HOSE WHILE IT WAS STILL PRESSURIZED HOSE GOT LOOSE & FITTING STRUCK HIM IN THE HED CUTTING HIS SCALP REWQUIRED 3 STITCHES
ROCK FELL OFF LOW LEDGE AND BROKE SMALL TOE ON RIGHT FEET WHICH WAS NOT PROTECTED BY THE STEEL TOE.
EMPLOEYE GASHED FINGER ON PIECE OF STEEL.
EMPLOYEE CLAIMED WORK RELATED STRAINED BACK AND WAS TREATED BY A DR.
FRAGMENT OF WRENCH STRUCK AND CUT EMPLOYEE IN THIGH.
EMPLOYEE SLASHED SIDE OF HAND ON JAGGE DPIECE OF STEEL WHILE RUNNING DRILL RIG.
EMPLOYEE CUT FINGER IN PNEUMATIC CLAMP OF DRILL STEEL SHARPENER.
APPLIED PRESSURE TO BLOCK JUMPED OUT OF WAY TWISTED KNEE
USING SLEDGE HAMMER TO BROKEN ROCK BOUNCED UPWARD & STRUCK FOREHEAD 8 STAPLES USED FOR SKIN NO FRACTURE OR LOSS OF CONSCIOUSNESS.