Buscar en el registro

EXPOSURE TO NOISE WHILE SURFACE MINING & CRUSHING DOLOMITE

EXPOSURE TO NOISE WHILE SURFACE MINING & CRUSHING DOLOMITE

AN EE WAS OPERATING KOMATSU FRT END LDR WITH A BUCKET DESIGNED FOR STEMING HOLES. THE BUCKET WASFULL OF MATERIAL (APPROX 800LBS) AND THE LOADER WAS FULLY ARTICULATED TO THE LEFT DURING THE APP ROACH TO THE HOLE HE DROVE THE RIGHT FRT WHEEL UPON A PILE OF ROCKS (APPROX 1') CAUSING THE REAR WHEELS TO LIFT OFF THE GRD. THE LOADER SPRIRALED DOWN OVER THE 20' HIGHWALL & LANDED ON THE LE

KNEELING ON FLOOR TO CHANGE SOCKET ON AIR IMPACT WRENCH. WHILE INSTALLING THE KEEPER PIN AND O RING THE TRIGGER MADE CONTACT WITH THE FLOOR CAUSING THE WRENCE TO ENGAGE TURN PIN. THE PIN WENT INTO THE EE'S PALM BEFORE HE COULD LET GO, RESULTING IN A LACERATION TO THE LEFT PALM.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CURSHING.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EMPLOYEE WAS WELDING APPROX. 5 FEET FROM ANOTHER PERSON WHO WAS WELDING ALSO. THROUGH INVESTIGATING THE INCIDENT IT APPEARS THAT THE ARC FROM THE OTHER WELDER HAD EITHER REFLECTED FROM THE MET TAL OR EMPLOYEE HAD CAUGHT THE ARC FROM BEHIND &AND REFLECTED OF THE LENS INSIDE THE HELMET CAUSING ENOUGH LIGHT TO GO INSIDE TO BURN HIS EYES. HE DID NOT HAVE ANY PROBLEMS UNTIL THAT EVENING

INJURED WAS UNLOADING A PROPANE BOTTLE FROM HIS TRUCK WHILE TRAVELING FROM TRUCK TO FILL LOCATION HE SLIPPED AND FELL. IT WAS RAINY, THERE WAS WET ICY SURFACE. ALSO THE SAND TRUCK WAS BROKEN DOWN UNDER REPAIR.

EE WAS IN THE PROCESS OF LOADING SHOT & FELT A SHARP BURNING PAIN IN THE LEFT GROIN. EE WAS SHOVELING & BENDING OVER TO PPICK UP BLASTING CAPS &POWDER. EE SAW PHYSICIAN & IS TAKING ANTI-INFLAM MATORY & ANTIBIOTIC MEDICATION.

EE WAS USING A THREAD TAP TO THREAD A HOLE IN A STEEL PLATE. THE TAP BROKE & THE EE'S HAND CONTACTED THE BROKEN TAP CAUSING A LACERATION TO THE HAND. THE EE WAS NOT USING THE T HANDLE FOR THE TAP & WAS NOT USING CUTTING OIL. THE LACERATION REQUIRED 3 SUTURES.

OPERATING DRILL & THE OPERATOR WOULD LAY HIS ELBOW ON DOOR OF THE CAB WILE SITTING IN SEAT. THE EDGE OF THE DOOR WHERE EMPLOYEE WAS RESTING ELBOW WAS NOT PADDED & THE VIBRATION CAUSED BURSITIS WITH AN INFECTION.

WHILE TRYING TO START A PUMP WITH A PULL ROPE TYPE STARTER THE EMPLOYEE FELT A PULL TO HIS SHOULDER. THE STARTED HAD TO BE PULLED SEVERAL TIMES, BUT THERE WAS NO PROBLEM ENCOUNTERED WHILE PULL ING ON THE STARTER.

EXPOSURE TO NOISE WHILE SURFACE MING AND CURSHINF DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.

SHOVEL OPERATOR WAS WALKING ACROSS THE PIT FLOOR, HE STEPPED OVER A MUD PADDLE AND TWISTED HIS KNEE.

EMPL ENTERED WEST END OF PINES SCREEN TO HELP CHANGE SCREENS. EMPL HAD SQUATTED DOWN UPON STANDING UP STRUCK HEAD ON STRUCTURE ABOVE.

EMPLOYEE WAS FALLING LIMBING AND CUTTING TREE LOGS TO 16' LENGTHS.AS HE CUT THE TOP OFF ONE LOG THE SAW HIT AN OBJECT KICKING THE SAW BACK AND INTO HIS ANKLE.THE EMPLOYEE WAS WORKING ON A HILL SLOPE OF APPROXIMATLEY 25%GRADE WITH LIMBS AND OTHER DEBRIS SCATTERED ON THE GROUND.

THUMB WAS CAUGH7 IN DOOR JAMWHEN A LOSING DOOR OF BACKHOE.

EMP PICKED UP A3GREASE UNIT TO SET IT ON A CONVEYOR. THE UNIT CAUGHT ON HIS CLOTHING AS HE LIFTED IT PUTTING HIM IN AWKWARD POSITION. AD A RESULT HE SUSTAINED A BACK INJURY STRAIN

EMPL WASHING SL5G DUST OFF DOZER IN PROCESS HE SLIPPED AND FELL HITTING SWING FRAME OF CAT.

EMPL ASSUMED TIGHT AWKWARD POSITION BETWEEN SCREEN DECK AND ECCENTRIC DRIVE ON 302 CRUSHER TO ENABLE A REPAIR TO THE SCREEN.

EMPL COMPLAINED OF EYE IRRITATIN AT SHIFT END FOLLOWING REASSEMBLY OF CONE CRUSHER.FOREIGN OBJECT LODGED IN EYE AS A RESULT OF USING AIR IMPACT HAMMERS DURING ASSEMBLY.

INSTALLING HOPPER SIDED FOR NEW BUNKER FOR RUNNING QUARTZITE FINES USING OVERHEAD CRANE.10\ X 8\ X 3/8\\ SHEETS OF STEEL VERTICALLY POSITIONED TO FORM SIDES.APPLYING SECOND PASS OF TEMP WELDS TO HOLD STRUCKURE IN PLACE-SHEET FELL SQUEEZING HIM BETWEEN SHEET AND SIDE OF HOPPER.

WORKING BENEATH TILT-TOP TRAILER ATTEMPTING TO REPAIR FAULTY ELECTRICAL WIRING.USING KNIFE TO REMOVE PLASTIC WIRE CONNECTORS WHEN KNIFE SLIPPED CUTTING FINGER.