Buscar en el registro

During a bi-yearly chest x-ray a miner was thought to have a spot on EE's lungs that is consistent with "Chronic Silicosis"

While attempting to close tailgate on haul truck, employee placed hand in pinch point. When tailgate closed, hand was caught in pinch point injuring third right finger.

The employee was using a razor knife to strip the insulation from the end of a wire when the blade slipped and cut two of the employee's fingers through employee's leather gloves.

Employee was walking on a catwalk and hit EE's left arm on a piece of sharp metal being used as a screen.

Employee captured HF acid in a bottle, placing it in their pocket and the bottle ruptured as EE walked back to plant burning EE's skin with chemicals.

While carrying a piece of 2" steel pipe a miner lost footing and fell to the ground. The pipe EE was carrying also fell striking EE in the head just above the left eye.

Maintenance employee bent over picking up hand tool and felt a pain in EE's lower back. EE reported it to management immediately.

Employee was loading and lifting screens. Several hours after lifting the screens and placing them in a separate storage area. The employee felt pain in lower left back.

The employee was picking up boxes when EE felt a pinch in EE's back. The pain got worst as the day went on. On 06/18/2022 EE reported it to management. On Monday 06/20/2022 EE went to the doctor and was wrote out of work for a pulled muscle.

2 miners were attempting to load a roll of plastic shrink wrap onto a stand. As miner #1 was removing the steel bar that holds the roll, miner #2 placed hand in the area of a pinch point to assist miner #1. Miner #1 lost the grip on the steel bar dropping it which cause an abrupt upward motion pinching the right index finger of miner #2.

A maintenance worker reported getting dust in both eyes at some point during the prior workday. EE was taken to Urgent Care as soon as reported. Employee's eyes were flushed with water. Prescription eye drops were given and used. On the next working day, the employee stated "EE was fine now." No lost time occurred.

While cleaning up debris after a maintenance task, old steel was being picked up and placed on a fork lift. As the employee picked up a piece of discarded metal there was on unseen "burr" attached to the backside. It cut through a leather glove and lacerated the little finger on the employee's right hand

Employee was stacking 50 lb. bags and felt pain in EE's right shoulder. EE later reported it to EE's supervisor.

Employee reported that on the 8/10/2020 they were mounting a forklift, using the grab handle and steps provided on machine. As they swung around into the seat they felt a pain in lower back. The employee reported this to supervisor on 08/13/2020 at 7:30 am. The employee normally works 2nd shift. Employee went immediately to the company physician.

While working in Plant 3, an engineer from the lab got sand in eyes. Employee was wearing safety glasses & full face shield at the time. Employee felt that the wind had blown it past the protection. Employee was taken to local eye dr who gave employee prescription eye drops. The employee had gone blind a couple years ago & has had eye transplants so ALL precautions were taken.

A maintenance worker was stepping over a pipe while attempting to remove it from a scrubber box. EE's left foot slipped and EE's knee buckled. EE has missed no time as EE was put on light duty. EE is wearing a knee brace.

Operator had just gotten out of machine turn to walk away and lost balance. This resulted in them shifting all their weight onto left ankle. They heard and felt a "pop" and reported it right away.

The miner was using a portable cement mixer to mix a cement compound to repair a crushing mill. While the miner was attempting to remove the cement compound from the portable mixer EE's left hand contacted the rotating paddles inside the mixing barrel. The employee stated "EE was in a hurry and did not disengage the rotating parts of the portable mixer".

Plant 1 supervisor was accessing steps to 8 deck screen. As ee reached the top step ee stumbled, falling forward onto the hand rail injuring ribs. Left side of body.

Employee reached into an observation port to see if material was flowing. EE left hand (fingers) contacted an energized rotary valve. Causing a pinch injury to 3 fingers

An employee was using a box cutter to remove packing material from belt. EE inadvertently made contact with EE's left leg. It resulted in a 3/4" cut to EE's inner thigh.

Placed hand by rack and left tip of middle finger was smashed.

While unclogging a chemical supply line material inadvertently contacted miners left eye. Causing a chemical burn to the eye

As employee crossed Altapass road to enter Plant 1 dust was blown into right eye. EE entered Plant 1 and flushed eye to remove dust. Then on 4/27/2017 EE reported to supervisor that EE thought eye was scratched. Management took the employee to eye doctor and had eye examined. It was found to be scratched but no particle found in eye.

EE was transferring inventory to shelf and strained lower back

The ladder way access to the railcar/tanker truck loadout had a pinch point near the handle.

Contract employee was finishing a weld near the jaw crusher when the 4" hand grinder wheel he was using caught or bound up, and the whole unit kicked back into his mouth area (no grinding face shield was being worn at the time).

Emp. was removing blower assemble from dryer. He pulled forklift to side hooked a strap onto blower, & raised the forks to put tension on the load, thinking the anchor point was center of gravity for lifting he remove the bolts where the blower was attached to the dryer, when the last bolt was removed blower shifted striking right leg, laceration to lower rt leg calf muscle area.

EE was welding in a tight area when a welding rod ember rolled onto his jacket burning a small area on the cuff and into the right top forearm causing a minor burn.

survey crew member attempted access for survey rod placement on steep bank, when he slipped and fell onto a small sapling stump (about 1" in diameter) that he had cut about 18" from the base minutes earlier causing the severe injury

EE was holding a pipe onto a small screw shaft, while another EE was hammering the shaft to help remove it, when the pipe slipped off, jamming the EE's right little finger onto the screw housing.

EE was reaching for a nearby control valve when he heard a "popping sound" emanate from his chest area that was braced against a railing.

Employee was adjusting a hatch opening back onto a rodmill when the hatch shifted, pinching the employees finger against the rodmill causing a laceration.

Employee was using a tool to clean out a blockage in the lime feed to the flouride tank when he scraped his right arm, and the lime slurry caused an irritation to that area.

While in the process of tightening a nut on a motor base, employee felt pain in lower right back area.