Buscar en el registro

EE BENT DOWN TO PUT OIL IN SHUTTLE CAR & FELT SOMETHING 'POP' IN HIS LEFT KNEE.

EE WAS BOLTING TOP WITH 300 GALIS ROOF BOLTER WHEN A PIECE OF DRAW ROCK 3' SQUARE X 3" FELL BETWEEN ROOF BOLTS AND STRUCK HIS LOWER BACK.

EMPLOYEE WAS WORKING ON BELT DRIVE WHEN A BELT CHAIN WRAPPED AROUND HIS THUMB.

EMPLOYEE STATED THAT WHILE BENDING A ROOF BOLT, HE PULLED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE WAS LIFTING BELT WHEN HE STATED THAT HEINJURED HIS LOWER BACK.

EE WAS BOLTING TOP WHEN A PIECE OF DRAW ROCK MEASURING 2' X 2' X 3" FELL BETWEEN ROOF BOLTS AND STRUCK EMPLOYEE ON LEFT SHOULDER.

EMPLOYEE STATED THAT WHILE PLASTERING A STOPPINGBETWEEN #2 AND #3 ENTRY HE PULLED HIS BACK.

FRONT END LOADER WOULDN'T CRANK. WHILE I WAS ATTEMPTING TO FREE STARTER BY TURNING THE FAN BLADES, THE ENGINE FIRED CAUSING THE FAN BLADES TO CUT MY HAND.

EMPLOYEE STATED THAT WHILE OPERATING A SHUTTLE CAR HE BOUNCED AND HURT HIS LOWER BACK. THE EMPLOYEE WORKED THE REMAINDER OF THE SHIFT.

EE WAS INSTALLING A BOLT IN THE "LEVELING ARM" OF THE ROOF BOLTER WHEN HE CAUGHT HIS HAND BETWEEN THE ARM & THE ROOF BOLTER HEAD.

EE WAS INSTALLING ROOF BOLTS AND CAUGHT HIS FINGER BETWEEN THE ROOF BOLT & THE BOLTER HEAD.

EE REPORTED TO MANAGEMENT THAT HE HAD PAIN IN HIS KNEE AND THAT HIS DR. SAID IT WAS DUE TO CRAWLING IN LOW COAL.

EMP WAS TRAMMING ROOF BOLTER TO #4 FACE. HAD HISARM ON TOP OF BOLTER. RAN OVER A ROCK INROADWAY CAUSING HIS ARM TO GET CAUGHT BETWEEN BOLTER ANDTHE TOP.

ROCK FELL OUT BETWEEN THE TRS AND ROOF BOLT STRIKING THE OPERATOR ON THE BACK OF HIS NECK AND SHOULDER CAUSING A BRUISE.

TWISTED RIGHT KNEE WHILE MOVING MINER CABLE.

ROCK FELL FROM ROOF AND HIT LOWER BACK.

OCCUPATIONAL PNEUMOCONIOSIS CLAIM.

ROCK FELL & HIT PATIENTS RIGHTARM.

HURT BACK WHILE WORKING ON DISC ON 245 LEE NORSE MINER

OCCUPATION PNEUMOCOMOSIS.

APPLICATION FOR OCCUPATIONAL PNEUMOCONIOSIS.

FELL BACKWARD OFF STEPS OF LOADER.

RIDING ON MANTRIP & RAN OVER A PIECE OF STRUCTURE MANTRIP BOUNCED & HE HIT FRAME OF MANTRIP WITH LEFT SHOULDER

BURNED RT HAND WHILE HOLDING IN THE OVER LOAD STEM ON PUMP MOTOR STARTER ON 245 LEE NORRIS MINER

CW PENUMOCONIOSIS NOTIFIED 2-28-94.

BACK SPORAIN - I CALLED UNDERGROUND TO CHECK ON PROGRESS OF MOVING THE BELT BACK. ARNOLD ANSWERED THE PHONE AND TOLD ME THAT THE CHAIN HAD BROKEN HOLDING THE TAILPIECE. THE TAILPIECE MOVED F ORWARD AND HIT HIS KNEE, BUT DIDN'T HURT HIM. ARNOLD DID NOT MENTION WANYTHING ABOUT GETTING HURT OR FILLED OUT ACCIDENT REPORT. INJURY NOT REPORTED TO EMPLOYER UNTIL 1-26-94.

EMPLOYEE WAS LIFTING ON HYDRULIC HOSE ON A 21 SC SHUTTLE CAR WHEN HE PULLED MUSCLES AROUND HIS RIB CAGE.

EE WAS OPERATING ROOF BOLTER. ROOF BOLT BENT AND EMPLOYEE'S HAND WAS CAUGHT BETWEEN ROOF BOLT & LEVELING ARM OF ROOF BOLTER.

NECK STRAIN

PULLED ROPE APART LUMBAR STRAIN.

EMPLOYEE WAS OPERATING SHUTTLE CAR WHEN HE HIT A HOLE IN THE ROADWAY AND INJURED HIS LOWER BACK.

EMPLOYEE WAS CUTTING A PIECE OF WIRE BOX CUTTER AND CUT LEFT HAND.

EE WAS OPERATING SCOOP WHEN HE HIT THE RIB WITH THE SCOOP BLADE, THIS CAUSED HIM TO BE BOUNCED UP AND HE HIT HIS HEAD AGAINST THE MINE ROOF CAUSING STUBED NECK.

EMPLOYEE WAS PRYING ON THE GATHERING DISK OF THE LEE NORSE 245 MINER USING A SLATE BAR WHEN INJURED SAID HE HURT HIS BACK.

GETTNG OUT OF MINER SCRAPED BACK ON CABLE STAND ON BRACKET

BOUNCED IN SHUTTLE CAR DECK AND INJURED LOWER BACK.

EMPL WAS STRIKING CHISEL.CHISEL FLEW BACK AND HIT EMPL CENTER OF FOREHEAD.