Buscar en el registro

Employee was bolting top in #4 entry when a piece of draw rock fell striking him in the left shoulder. The rock measured approximately 3' X 2' X 1" to 10".

While bolting top the roof bolt operator turned to make a bolt up and a piece of roof fell striking the employee on the right ear causing a laceration, Employee received first aid at scene and was transported to HRMC at Prestonsburg Ky,where he received stitches to his right ear.

Employee was putting up bolt, a rock bust loose from roof, spinning of bolt propelled rock, rock struck right side of face. Injured nose, and right eye area; cause fracture to nose and laceration.

PIECE OF DRAW ROCK FELL, HIT CANOPY BUSTED AND PIECE OF ROCK HIT RIGHT SIDE OF FACE. WAS TAKEN TO ER WAS EXAMINED AND PERSCRIBED ANTIBIOTIC OINTMENT, SCHEDULED TO SEE SPECIALIST ON 04/01/2010 AND WAS RELEASED TO GO BACK TO WORK 04/02/2010.

Employee was bolting a place that had fallen out. He had installed 2 rows of bolts and was on the 3rd row inside bolt when a rock fell striking canopy, then striking employee on right ear causing a laceration to the right ear. He was taken to local hospital where 3 stitches were used to close the laceration.

EE WAS WALKING BACK TO ROOF BOLTER AFTER EXITING WHEN A PIECE OF ROCK 27" X 24" X 3" FELL STRIKING HIS HARD HAT KNOCKING HIM TO THE MINE FLOOR.

EE WAS TRAMMING LO TRACK FORKLIFT BETWEEN RIB & TRACK. A PIECE OF DRAWROCK APPROX. 15"X 16"X 3" THICK FELL FROM TOP, BOUNCED UNDER CANOPY, STRIKING HIM ON THE SHOULDER. EE WAS RELEASED BY DR. TO RETURN TO WORK ON 3-25-02. HE QUIT & TOOK A JOB WITH ANOTHER COMPANY.

EE WAS STANDING BESIDE THE FLETCHER ROOF BOLTING MACHINE IN THE LAST OPEN CROSSCUT. A PIECE OF DRAW SLATE (3' WIDE BY 5' LONG BY 2' THICK) FELL STRIKING HIM ON THE NECK AND RIGHT SHOULDER KNOC KING HIM TO THE MINE FLOOR. HIS INJURIES WERE CONTUSIONS TO THE NECK, SHOULDER AND RIB CAGE. HE WORKED HIS NEXT TWO SHIFTS BUT WAS UNABLE TO WORK ON 5-14-01.

EE WAS WALKING IN THE #5 ENTRY WHEN A PIECE OF DRAW ROCK (LAMINATED SANDSTONE) MEASURING 23" X 14" X 4" THICK FELL & STRUCK HIM ON THE HARD HAT& RIGHT SHOULDER. THE HEIGHT WAS 99". HE SUFFERE D A SLIGHT CONCUSSION & MUSCLE STRAIN TO THE LOWER BACK. HE WAS UNABLE TO WORK ON HIS NEXT REGULARLY SCHEDULED SHIFT.

EE WAS ASSISTING TWO CO-WORKERS IN LIFTING A BATTERY CHARGER ONTO A BATTERY POWERED SERVICE WHEN A PIECE OF DRAW ROCK, MEASURING 3 FT X 5 FT X 1 1/4 IN, FELL AND STRUCK HIM ON THE OUTSIDE OF T HE RIGHT FOOT (BEHIND METATERSAL GUARD). SEAM HEIGHT WAS APPROXIMATELY 78 INCHES.

EE WAS CONNECTING A FLEXIBLE WATER LINE TO A HARD LINE WHEN A PIECE OF SHALE ROOF FELL STRIKING HIM IN THE BACK.

EMPLOYEE HAD FINISHED LOADING SHUTTLE CAR AND WAS TURNING AROUND IN SEAT TO GO ANOTHER DIRECTIONWHEN ROCK FELL FROM TOP, STRIKING HIM ON HIS RIGHT KNEE.

EE STATED HE WAS CHECKING #4 ENTRY WHEN A ROCK FELL FROM RIGHT OUTSIDE BOLT TO RIB STRIKING HIM ON HEAD AND SHOULDER AND RIGHT KNEE.

EE WAS OPERATING CONTINUOUS MINER BY REMOTE CONTROL WHEN ROCK FELL BETWEEN ROOF BOLTS STRIKING HIM ON NECK AND SHOULDERS.

SHALE ROOF ROCK FELL FROM THE MINE'S ROOF STRIKING EMPLOYEE ON LEFT SHOULDER AND ARM.

WHILE CHECKING RIGHT SIDE OF ROOF BOLTER A ROCK FELL FROM THE ROOF AND HIT EE ON LEFT ARM. IT WAS 14"L X 6"W X 1/2" THICK.

EE WAS BENT OVER ON KNEES WORKING ON LEFT SIDE OF CONVEYOR MOTOR WHEN A ROCK FELL FROM THE ROOF. IT MEASURED 2-1/2" WIDE X 4" LONG, 0-4" THICK.

PERSON INJURED WAS SET UP UNDER A STATION SPAD AND WAS DIRECTING HIS BACKSIGHT MAN TO SET A DIRECTIONAL POINTER. AT THAT POINT A ROOF ROCK BROKE LOOSE AND FELL DIRECTLY ON THE TRANSIT AND PART IALLY CAUGHT THE SURVEYOR ON THE HEAD RESULTING IN A LACERATION WHICH NEEDED 7 SEVEN STICHES. THERE WAS NO KNOWN CONTRIBUTING FACTOR TO THE ROCK FELL.

INJURED WAS STANDING IN AN ENTRY WHEN A PIECE OFCAP COAL FELL FROM THE ROOF.

EMPLOYEE WAS BENT OVER WHEN A PIECE OF SHALE ROOF FELL STRIKING HIM ON THE HEAD AND UPPER NECK. EMPLOYEE DID NOT BEGIN MISSING WORK UNTIL 3-16-95. EMPLOYEE UNDERWENT SURGERY OF HIS NECK ON THI S DATE.

SUBJECT WAS TRAVELING TO THE SURFACE WHEN A PIECE OF SHALE FELL FROM THE ROOF. AN INVESTIGATION REVEALED THIS PIECE OF SHALE WOULD HEVE BEEN DIFFICULT, IF NOT IMPOSSIBLE, TO PREDICT ITS FALL.

EMPLOYEE GOING AFTER SUPPLIES WHEN 50-60LB ROCK FELL FROM TOP STRIKING EMPLOYEE ON THE BACK OF THE HEAD.

SUBJECT WAS WALKING ALONG AN ENTRY WHEN A PIECE OF COAL & SHALE MIXTURE FELL SUDDENLYWITHOUT WARNING STRIKING HIM ON THE HEAD

EMPLOYERE WAS STANDING IN THE INTERSECTION OF THE LAST OPEN BREAK IN NUMBER 7 ROOM,OBSERVING OTHERS HANGING ELECTRICAL CABLE.A PIECE OF SHALE ROCK FELL FROM BETWEEN PERMANENT ROOF SUPPORT STRI LKING HIM ON THE HEAD AND CHEST.INJURED CONTINUED TO WORK FROM THE DATE OF THE ACCIDENT TO OCTOBER 12,1993 ON OCTOBER 13,1993 HE BEGAN MISSING WORK AS A RESULT OF THIS ACCIDENT.

45506ERE GETTING COAL SAMPLES FROM INSIDE MINE WHEN A PIECE OF SLATE FELL FROM THE ROOF STRIKING EMPLOYEE AND LACERATING HEAD.

SUBJECT WAS INSTALLING POWER CABLES FOR MINING EQUIPMENT AT THE SECTION POWER TRANSFORMER. AS THE SUBJECT BENT OVER TO PICK UP A CABLE HI SHARD HAT FELL FROM HIS HEAD. BEFORE HE COULD REPLACE HIS HAT A PIECE OF SHALE FELL FROM THE ROOF STRIKING HIM ON THE FOREHEAD.

WAS PUTTING GLUE AND BOLT IN BOLTED HOLE WHEN ROOF FELL.

EMPL POSITIONED HIMSELF ON KNEEES WHILE OBSERVING OPERATION OF CONTINUOUS MINER. SUDDENLY PIECE OF SLICKENED SHALE FELL WITHOUT WARNING STRIKING HIM ON HEAD & SHOULDER RIDING HIM TO MINE FLOOR . HE IMMEDIATELY BEGAN EXPERIENCING PAIN IN LEFTFOOT. HE STATED THAT HE WAS UNCERTAIN ABOUT ROCK STRIKING FOOT. HE FURTHER INDICATED THAT HE COULD HAVE TWISTED FOOT.

VICTIM WAS RIDING IN THE BUCKET OF A SCOOP WHICH WAS TRAVELING TOWARD THE SURFACE. A SMALL PIECE OF SHALE MEASURING 1"X6" FELL,STRIKING HIM ON THE LEFT HAND.

VICTIM WAS OPERATING A CONTINUOUS MINING MACHINE WHEN THE ACCIDENT OCCURRED.HE HAD POSITIONED HIMSELF ON A PADDED METAL STOOL WHILE OPERATING THE CONTINUOUS MINER BY REMOTE CONTROL.A PIECE OF SAHLE SUDDENLY FELL FROM THE RIGHT RIB AND THE RIGHT RIB AND THE RIGHT ROW OF ROOF BOLTS,STRIKING HIM ON TOP OF THE HARD HAT,SLIDING FORWARD ONTO HIS LEFT FEMUR.

EMPLOYEE HAD STOPPED THE CONTINOUS MINER HE HAD BEEN OPERATING AND WAS STANDING NEAR FACE BENEATH UNSUPPORTED ROOF A PIECE OF SHALE FELLF ROM THE ROOF AND STRUCK HIM AND KNOCKED HIM TO THE MINE FLOOR HE SUFFERED A FRACTURED METACRAPAL OF THE RT HAND AND A CONCUSSION

VICTIM WAS MEAS6RING TO DETERMINE LOCATION FOR INSTALLING A ROOF BOLT A PIECE OF SHALE FELL AND STRUCK VICTIM FROM REAR VICTIM WAS POSITIONED BETWEEN THE ATRS SYSTEM AND THE LAST ROW OF ROOF BOLTS INSTALLE8 ON THE PREVIOUS CYCLE THE SHALE WAS NOT ADEQUATELY BOUND TO THE SANDSTONE ROOF ABOVE DUE TO A SMALL MUD STREAK SHALE MEASURED 19 FT LONG FROM 2 TO 5 FT WIDE AND APPROX 2 1/2

A ROCK APPROX 32X3'X10" WEIGHING IN EXCESS OF 100# FELL FROM ROOF & STRUCK I.ANME ON THE BACK OF THE HEAD & RIGHT SHOULDER. HE SUSTAINED A CRUSHED VERTEBRAE C-2. HIS PHYSICIAN FEELS HE CAM CAN MAKE A 3COMPLETE RECOVERY BUT WILL BE UNABLE TO WORK FOR OVER 2 MONTHS.

VICTIM WAS THE 3C/M OP HELPER HE WAS SITTING ON T HE MINE FLOOR APP 40' OUTBY THE FACE OF #2 ENTRY WHEN A PIECE OF SLICKENSIDE SHALE FELL FROM BETWEEN THE ROOF BOLTS & STRUCK THE VICTIM ON TOP OF THE HEA8. SHALE MEASURED 18"X36"X2" THICK. WEIGHT WAS ESTIMATED AT 100#.

VICTIM EAS SERVICING A F LETCHER TWIN-BOOM ROOF BOLTING MACHINE. WHILE VICTIM WAS ADDING OIL TO THE ROOF BOLTER A PIECE OF DRAW SLATE FELL BETWEEN THE ROOF BOLTS AND STR UCK HIM ON THE HARD HAT AND THEN ON HIS LEFT HAND. WHEN THE SLATE FELL THE VICTIMS HAND WAS LAYING ON SOME HALF HEADERS BEING STORED ON THE BOLTING MACHINE. THE 18" X 24" X 4" DRAW SLATE MASHE

VICTIM AND I.NAME WERE OPERATING A FLETCHER TWIN BOOM ROOF BOLTING MACHINE INSTALLING 42" ROOF BOLTS. THE MACHINE IS EQUIPPED WITH A ATRS UNIT. AS THEYT BEGAN TO DRILL THE FIRST HOLS IN THE S ECOND REW OF BOLTS IN THE BUT A PIECE OF SHALE APPROXIMATELY 15" WIDE X 49" LONG AND 2 TO 4" THICK FELL BETWEEN THE H-BEAM OF THE BOLTER AND STRUCK THE VICTIM.

VICTIM AND ANOTHER MECHANIC WERE ATTEMPTING TO TIGHTEN HYDRAULIC HOSES ON A TELETRAM. WHILE VICTIM WAS BENT OVER TIGHTENING A HOSE A PIECE OF SHALE FELL UNEXPECTEDLY AND S TRUCK VICTIM IN THE LOWER PART OF HIS BACK.

VICTIM AND CONTINUOUS MINER CREW WERE TRAMMING THE CONTINUOUS MINER FROM #1 ENTRY ACROSS SECTION TO #6 ENTRY. VICTIM WAS ASSISTING WITH THE TRAILING CABLE HANDLING. A PIECE OF DRAW SLATE APPR OXIMATELY 1 FT. X 1 FT. X 3" FELL STRIKING THE VICTIM ON THE HEAD AND BACK OF THE NECK. THE ACCIDENT OCCURRED IN THE #2 ENTRY, 2 BREAKS OUTBY THE FACE OF THE 003 SECTION. VICTIM CONTINUED TO

VICITM WAS SITTING IN OPERATOR COMPARTMENT OF C/M. WHILE VICITM WAS OPERATING THE C/M A PIECE OF DRAW SLATE FELL FROM THE ROOF STRIKING THE CANOPY & THE VICTIM\S RIGHT ARM & LEG. THE DRAW SL ATE WAS APPROX 18"X12"X1" THICK. VICTIM SUFFERED CONTUSIONS OF THE RIGHT ARM & LEG. X-RAYS INDICATED THAT NO BONES WERE BROKEN.