Buscar en el registro

On Monday Jan. 27th 2014 a Ring Power Mechanic was onsite to perform a scheduled PM on our Challenger equipment to access the engine compartment. At some point, the Mechanic let the hood go and the hood came down on the left foot of the Mechanic. The employee was taken to their company physician. This injury is currently classified as an ER-LWC

The employee came in contact with 12.86 PH water and received two quarter size burns on her left hip.

Employee had lifted a 1 inch steel plate weighing approx. 55 lbs.(weight of steel plate was not know in the field) and was holding it up while waiting for installation. After handing off the plate and leaving the area, a few minutes later he felt pain in his lower back.

On 08/11/11, Employee was going up and down on ladder/stairs making repairs to process equipment. The following day, the left knee was swollen and had soreness & pain. On 08/30/2011, the employee reported to medical/supervision concerning the knee pain.

EE was working on 30" dredge feed line piping. When he crossed over the pipe, his right knee made contact with the steel channel on the pontoon surface. He reported the incident to supervision and he said he felt stiffness in his right knee. Plant Physician recommended employee get an x-ray. X-ray results were negative. Employee was instructed to apply ice to the knee.

On Friday 12/25/09 at ~11:00 P.M., a Dupont water operator sustained 2nd degree burns on his right hand and chest. when the #3 Seepage pump suction pipe failed and was sprayed with hot water from the pump. Operator was treated at the local hospital and released. A full investigation is ongoing. This case has been classified as an ER/MTC

Employee was in the process of taking down a 1 ton chainfall rigged to an overhead beam. He went up a stepladder and unhooked the chainfall setting it on top of ladder. As he started down the ladder the chainfall slipped off the ladder. As he tried to catch the chainfall the hook caught his glove and he suffer a jerk and strain to his left shoulder.

On Tuesday July 21, at approximately 10:15 in the morning a DuPont operator received a laceration on the right thumb when he was working on a magnet. Employee notified supervision and was examined by Plant Medical, then transported to a local hospital where he received sutures. Injury is classified as an ER-RWC.

Metal plate fell on employee's hand, resulting in a broken bone in his left middle finger. Employee returned to work the following day.

Employee twisted wrist when she turned quickly while holding a 3/4" water hose.

WHILE UNLOADING A WORK BOAT SHAFT INTO THE BACK OF A MAINTENANE VEHICLE, THERE WAS A SLIGHT SHIFT IN THE LOAD CAUSING THE SHAFT TO SLIP DOWNWARD & PINCH THE TIP OF THE MIDDLE FINGER ON HIS RIGHT HAND.

CONTRACT EE WAS IN PROCESS OF REMOVING A SLEEVE FROM A 12" PUMP DISCHARGE END SLEEVE FELL HITTING EE ON RIGHT FOOT CAUSING LACERATION WHICH REQUIRED SUTURES.

TYING THE BOAT A WAVE HIT THE BOAT AND HIS HAND WAS CAUGHT BETWEEN THE BIT AND THE ROPE.

EE BENT OVER TO PICK UP 50 LB BAG AND EXPERIENCED DISCOMFORT IN LOWER BACK. WENT TO SEE OUTSIDE MEDICAL PROVIDER AND WAS GIVEN MULTIPLE DOSES OF PRESCRIPTION MEDICATION.

WHILE WORKING ON ROUGHER B HEAD FEED PUMP, THE PUMP SHEAVE BECAME DISLODGED AND FELL OFF THE SHAFT AND FELL OVER ONTO EMPLOYEE WHO SUSTAINED THREE SMALL CUTS FROM LINER OF HARD HAT. SUTURES WERE REQUIRED.

WHILE IN THE PROCESS OF REMOVING THE DREDGE MOTOR BARREL ASSEBMLY, A COUPLING FELL AND PINCHED MECHANIC'S LITTLE FINGER ON THE LEFT HAND. SURGERY WAS REQUIRED TO REPAIR DAMAMGE.

MAINTENANCE EE WAS REMOVING A SECTION OF PIPE FROM 30" DREDGE LINE. AFTER REMOVING THE LAST BOLT, SECTION OF PIPE SHIFTED PINACHING EE'S THUMB BETWEEN FLANGES. THE BONE IN THE TIP OF THE LEFT THUMB WAS FRACTURED. THE THUMB WAS REPAIRED AND EE RETURNED TO NORMAL SUPERVISOR WORK THE NEXT DAY.

WHILE IN THE PROCESS OF CHANGING THE DREDGE PORT SWINGLINE, A UTILITY OPERATOR'S HAND BECAME ENTANGLED IN THE CABLE HE WAS HANDLING. AFTER A PERIOD OF TIME, CO-WORKERS REALIZED THE UTILITY OPE RATOR'S HAND WAS ENTANGLED, AND CUT THE CABLE TOFREE HAND. HE WAS THEN TAKEN TO LOCAL HOSPITAL TO BE CHECKED. EXAMINATION DISCOVERED A DISLOCATED FINGER. THE FINGER WAS PUT BACK IN PLACE. NO

WHILE LIFTING A 1 1/4 DIAMETER WIRE ROPE, THE WIRE TWISTED. THE WATCH BAND THE OPERATOR WAS WEARING WAS CAUGHT BY THE WIRE ROPE AND THE WATCH BAND CUT THE OPERATOR. SUTURES WERE REQUIRED TO CL OSE THE WOUND.

WHILE MOVING A PIECE OF 3/4" FLAT PLATE DURING FABRICATION THE FLAT PLATE FELL ON HIS FINGER, PINCHING IT BETWEEN THE PLATE & WORK TABLE. THE TIP OF HIS FINGER WAS LACERATED, REQUIRING 4 STIT CHES. THE FINGER TIP HAD A HAIRLINE FRACTURE & ASPLINT WA APPLIED TO PROTECT THE FINGER.

A MECHANIC WAS INSTALLING A PICKUP TRUCK TOOL BOX. THE TOOL BOX SLIPPED AND FELL. THE RIGHT THUMB TIP WAS CAUGHT BETWEEN THE TRUCK BODY AND THE TOOL BOX. STITCHES WERE REQUIRED TO CLOSE THE WO UND.

OPERATOR WHILE WEARING LEATHER GLOVES, WAS CLEANING GLUE FROM A BAG SEALER. THE SEALER WAS SHUT DOWN AND LOCKED OUT. HIS HAND SLIPPED AND CAME IN CONTACT WITH A SHARP EDGED PIECE OF METAL. THE HAND WAS CUT THROUGH THE LEATHER GLOVE. SUTURES WERE REQUIRED TO CLOSE THE WOUND. THERE WAS NO TIME LOST FROM WORK AND NO RESTRICTIONS ON HIS ACTIVITIES.

WHILE LOOSENING SOME STRETCH WRAP FROM THE STRETCH WRAP HOLDER THE OPERATOR CONTACTED THE CORNER OF A PIECE OF METAL & CUT THE FLESHY PART OF HIS PALM. THE OPERATOR RETURNED TO WORK IMMEDIATE LY FOLLOWING TREATMENT.

ELECTRICIAN WAS DESCENDING WALKWAY INTO #2 FEED SYSTEM. HAND WAS ON HANDRAIL & STRUCK HANDRAIL &STRUCK HANDRAIL SUPPORT INJURING LITTLE FINGER ON LEFT HAND.

MECHANIC WAS MOUNTING A TIRE ON WHEEL WHEN HIS AHND SLIPPED,STRIKING THE RIM OF THE WHEEL.THE INSIDE OF THE LEFT WRIST WAS ABRADED...ABOVE THE TOP OF HIS GLOVE.

TWO MECHANICS WERE WORKING TO REMOVE THE FACEPLATE OF A 3 X 4 WARMAN PUMP WITH CAST VOLUTE. AFTER REMOVING THE SUCTION AND DISCHARGE PIPING, THE FACE PLATE BOLTS WERE REMOVED. THE MECHANICS WE RE THEN TRYING TO LIFT AND PULL THE FACEPLATE AND VOLUTE OFF THE STUD BOLTS WHEN THE FACEPLATE MOVED. THE MECHANIC'S THUMB WAS MASHED BETWEEN THE FACEPLATE AND THE VOLUTE.

EMPLOYEE AND FELLOW EMPLOYEE WERE LOADING CONCRETE SLABS ONTO FLATBED TRAILOR WHEN INJURED EMPLOYEES LEFT INDEX FINGER WAS CAUGHT BETWEEN LIFTED SLAB AND PREVIOUSLY LOADED SLAB AS THE FORMER W AS LOWER ON TO TRALIER.

MECHANIC HAD BU9NED OFF A VERTICAL PIECE OF 3" PIPE. WHEN HE ATTEMPTED TO MOVE IT IT OVERBALANCED & RESTED AGAINST THE BACK OF HIS NECK. THE PIPE WAS STILL HOT & CASUED 2ND & 3RD DEGREE BURN S ON HIS NECK.3

OPERATOR STRUCK3HAND AGAINST METAL DRIVE BELT BUARD CUT FINGER.RECD 2 SUTURES.

AN OPERATOR WAS3CARRYING THE STEEL TAPE FROM A 16' TAPE MEASURE TO DISPOSE OF IT. THE END OF THETAPE CAUGHT IN THE WALKWAY GRATING AND THE TAPE WAS PULLED THROUGH HIS FINGERS. HIS FINGER AND T HUMB WERE LACER5TED, AND REQUIRED 8 STITCHES

TWO MECHANICS W9RE BREAKING A 3" PUMP DISCHARGE LINE.THE INJURED WAS HOLDING A VALVE HANDLE AND MOVING THE PIPE UP AND DOWN SO THAT THE OTHER MECHANIC COULD REMOVE THE FLANGE BOLTS.AS THE LAS T BOLT WAS REMO5ED,THE LINE DROPPED,PINCHING THE MECHANIC'S FINGER BETWEEN THE VALVE HANDLE AND THE FLANGE.HIS FINGER WAS LACERATEDAND REQUIRED SEVEN SUTURES.

AN OPERATOR WAS3ROTATING A MOTOR DRIVE BELT TO CHECK THE REPLACEMENT NUMBER. HE WAS PULLING THE BELT AROUND THE PULLEYS WITH HIS HAND. THE BELT WAS TIGHT AND MOVED SUDDENLY. HIS LITTLE FINGER WAS PINCHED BET4EEN THE BELT AND THE PULLEY. THE BONE IN HIS FINGER HAD A SMALL FRACTURE. THE FINGER WAS SPLINTED AND HE RETURNED TO WORK

TWO EMPLOYEES W9RE MOVING A LABORATORY MAGNET TO A STORAGE SHED THEY WERE STEPPING UP FROM A CONCRETE PAD TO A DIRT SURFACE APPROX 1 FT ABOVE THE CONCRETE THE EMP FOOT SLIPPED AND HE FELL DOWN THE MAGNET DROP1ED ON HIS RT CALF HIS CALF WAS CUT AND REQUIRED THREE SUTURES

EMPLOYEE WAS CA9RYING MOP BUCKET WITH WATER, AS SHE CAME AROUND A CORNER, SHE HIT A RAILING WITH THE BUCKET, CAUSING THE BUCKET TO TURN SHARPLY TO THE INSIDE, TWISTING EMPLOYEE'S RIGHT HAND.

MECHANIC WAS REMOVING A SERVICE MANUAL FROM A BOOK SELF. HIS HAND SCRAPED THE INSIDE EDGE OF T HE BOOK SLEF & WAS LACERATED ON THE BACK OF HIS LEFT HTUMB.

EMPLOYEE WAS HELPING ATTACH A BUSH-LONG MOWER TO A TRACTOR. THE MOWER WAS RAISED APPROX. 6" TO INSERT BOLT IN THE HITCH. WHEN THE MOWER WAS LOWERED IT STRUCK HIM IN THE LEFT FOOT, BREAKING THE FIRST METATARSAL BONE.

EMP WAS SEARCHING FOR SOME TOOLS IN U TILITY TOOL BOX WHICH IS MOUNTED IN TRUCK BED AS HE WAS LOOKING HE HIT THE SUPPORT STAND WHICH HOLDS THE LID UP LID FELL DOWN AND STRUCK EMP ON THE HEA SUSTAINED GASH ON TOP OF HEAD WHICH REQUIRED SUTURES

INJURED WAS CHANGING PRESSURE GAUGE ON A SEALWATER LINE. WATER & SAND SPRAYED ON HIS FACE & RAN INTO HIS EYES. NO FIRST AID WAS ADMINISTERED BECAUSE HE SAID HIS EYE FELT CLEAR AT THE TIME. BY THE FOLLOWING EVENING HIS LEFT EYE WAS SORE & SWOLLEN. A GRAIN OF SAND REMOVED FROM HIS LEFT EYE THE NEXT DAY.

INJURED STOPPED DRILL PRESS TO REMOVE A METAL SHAVING WHICH HAD WRAPPED AROUND THE SPINDLE. THE SHAVING WAS UNDER TENSION & STRUCK HIM ON THE THUMB WHEN RELEASED. HIS THUMB WAS CUT & REQUIRED 5 SUTURES.