Buscar en el registro

While installing a driveshaft in haul truck it slipped from EE's hand and struck EE in the shoulder.

While working on the bench, was taping holes upon pulling the product hose, felt pain in left wrist (1st day of treatment 7/29/22)

While exiting a Cat 765 rock truck, EE extended right arm causing a muscle strain to EE's right shoulder.

While pulling pin from bucket, pin fell on hand breaking the left little finger and lacerating same finger - broken finger with 3 stitches.

While assisting another EE in lifting a banding cart, EE felt pain in their back.

Removing rocks from plugged head pulley discharge box, EE initially reported right shoulder strain (9/10), worked 9/7, 9/10, & 9/11. On 9/11, EE sought medical treatment for left shoulder pain.

While cleaning syntron pan a bar fell and struck EE on the chin causing a contusion to chin and lip.

While moving full barrels of oil, EE managed to pinch wrist/forearm between barrels. Pinch/crush injury, no fractures.

While lifting heavy piece of steel EE felt pain in neck and right shoulder.

While connecting hoses to Sanvic crusher, EE stood up and cut head on a piece of channel iron.

While repairing a spring on a truck a foreign object fell in EE's eye. He was wearing safety glasses. Went to ER for eye wash and exam. Returned immediately to work.

While reaching to remove a rock from conveyor EE felt a sharp pain in his back, 5-10lb rock.

While cleaning under a conveyor EE pinched finger between conveyor and walk behind bobcat.

While removing rocks from jaw crusher by hand EE felt pain in left wrist.

Vendor ee was moving tires from a loader. He was using an excavator to remove tires. EE & another ee (plant mgr) had discussed need to put blocks under loader to crib it up. Loader moved & counter weight hit him in leg/side. 911 called

EE jammed finger into heater/fan to see if it was working, it was and fan chopped off the tip of EE's finger.

While hanging conduit for new conveyor EE hit elbow on one of the conduit hangers severly bruising elbow.

While moving wood blocking in the shop EE got a sliver in left hand.

While exiting truck EE closed the door on left middle finger.

While performing maintenance on crusher EE's hand slipped and lacerated left pinky finger on the crusher ring.

Unloading steel, employee cut right pinky finger on a sharp edge.

While preparing conveyor wiper blade, employee placed his hand on a hot piece of steel, burning his hand.

While changing screen on plant, EE bent over to pick up a wrench and struck his knee on a piece of steel on catwalk.

While replacing a conveyor belt, conveyor slipped off block landing on EE's left foot.

Employee was assisting in the changing of blow bars on a crusher. While lifting, employee strained his lower back.

EE WAS ATTEMPTING TO UNPLUG A HOPPER USING A STRAP AND EXCAVATOR, WHEN A ROCK BECAME LOOSE ROLLING DOWN STRIKING THE EE ON THE LEFT HIP CAUSING BRUISING ANDD A CONTUSION ON KNEE AND ANKLE.

FAILED TO LOWER THE FLIP UP/DOWN STAGING.

EE WAS HANDLING A RETURN ROLLER AND WENT TO HAND THE ROLLER TO ANOTHER EE AND TWISTED HIS BACK.

HE TWISTED HIS LEFT KNEE WHILE PULLING ON A PIPE. HIS FOOT GOT STUCK IN THE MUD.

WHILE LIFTING A GAS CAN ONTO THE DRAGLINE, HE FELT A STABBING PAIN IN HIS LOWER BACK.

EE WAS HANDING A 2" STEEL PIPE DOWN A DITCH TO ANOTHER EE WHEN HE FELT A MUSCLE PULL IN HIS BACK.

EMPLOYEE WAS PULLING A TUBE OFF OF THE LIME TRUCK AND AT THE END OF TUBE WAS A HOT STEEL WIRE THAT HIT HIS RIGHT HAND AND BURN A QUARTER SIZE PIECE OF FLESH.

WE WERE PUTTING NEW SCREENS ON #6 SCREEN. THE SCREEN SLIPPED AND HIT MIDDLE FINGER AT THE TIP AND CUT IT.

EE STATES HE WAS REMOVING ROCK BY HAND UNDER #1 BELT HE SAYS HE FELT A PULL

EE WAS PUTTING A HYDRAULIC MOTOR IN A FLOWBOY. WHILE ATTEMPTING THIS HE PUT HIS BODY IN A AWKWARD POSITION. HE FELT A POP IN HIS UPPER BACK. HE DID FINISH OUT THE DAY. HE TOOK 11-5-99 OFF AND SEEKED MEDICAL ATTENTION WITH DR. HE RETURNED TOWORK ON 11-7-99.

EMPLOYEE WAS ROTATING BLOWBARS IN THE HAMZAG WHEN THE ROLLER BED TURNED AND THREW THE BLOWBAR.

EE WAS OPERATING THE HOSE ON THE WATER TRUCK WHEN THE HOSE SLIPPED OUT OF HIS HANDS. DUE TO PRESSURE THE HOSE SWUNG AROUND AND STRUCK UP AGAINST HIS LEFT THIGH.

EE WAS ON TOP OF THE BAGHOUSE CLEANING OUT DUST WHEN HE ACCIDENTLY BUMPED THE DOOR TO THE BAGHOUSE AND IT SLAMMED HIS FOOT AS IT FELL DOWN.

EE WAS HOLDING A PIECE OF STEEL (1/2" X4' X 8') WITH 2 OTHER EES. THEY WERE HOLDING UPRIGHT IN 8' EDGE WHILE ANOTHER EE WAS CUTTING IT IN HALF. WHEN CUT WAS COMPLETED, STEEL KICKED AROUND CAME OFF BOARD IT WAS RESTING ON AND LANDED ON EE'S TOES.

EE WAS CLIMBING UP THE LADDER ON THE ROCK TRUCK. HE WAS HOLDING ONTO LADDER WITH ONE HAND AND CARRYING A BUCKET OF OIL IN THE OTGHER. HE PULLED A MUSCLE IN HIS ARM, NEAR THE SHOULDER, ARM HE W AS CARRYING OIL IN.

EE WAS STANDING ON THE GOOSENECK (TRAILER) WHILE ASSISTING WITH THE LOADING OF A CONVEYOR ON TRAILER. THE CONVEYOR SHIFTED FORWARD, DURINGH LOADING AND PINCHED EE'S TOES. TOES PINCHED BETWEEN CONVEYOR AND GOOSENECK.

AFTER WELDING ON A TRANSMISSION, EMPLOYEE WASS SCRAPPING IT FREE OF DIRT AND GREASE. EMPLOYEE EXPERIENCED DISCOMFORT WHEN SOMETHING LODGED IN HIS LEFT EYE.

EE WAS PUTTING A TRACK BACK ON BOBCAT EXCAVATOR. TRACT SLIPPED OUT OF HIS HAND AND PINCHED HIS RIGHT HAND IN BETWEEN THE TRACK AND FRAME.

EMPLOYEE WAS ATTEMPTING TO CLEAN UP THE SHOP. HE DROPPED A [IECE OF STEEL ON THE FLOOR OF THE SHOP. IT KICKED UO A MALL FRAGMENT OF STEEL WHICH WENT INTO HIS RIGHT EYE. HE WAS WEARING SAFETY G LASSES AT THE TIME.

CHANGING TRUCK TIRE, DROPPED RIM ON FOOT.

EE WAS SHOVELING MUD OUT OF THE TRUCK WHEN HE STAINED HIS BACK

EMPLOYEE WAS LIFTING A ROCK, WEIGHING APPROX. 100 LBS WITH HIS RIGHT HAND. HE MOVED THE ROCK ABOUT 1 FOOT AND FELT A SHARP PAIN RUN THROUGH HIS BACK. THE PAIN CAUSED HIM TO GET VERY WEAK.

EMPLOYEE WAS LIFTING THE SCREEN FOR THE SCALPER AT THE SECONDARY PLANT TO POSITION IT CORRECTLY WHILE LIFTING SCREEN HE TURNED TO THE LEFT,PULLING A MUSCLE IN HIS BACK.

EMPLOYEE WAS REACHING FOR HIS GLOVES IN A PARKED TRUCK. THE DOOR CLOSED CATCHING HIS HAND IN DOOR.

EMP WAS CHANGING V-BELTS ON BARMAC CRUSHER. THUMB GOT PINCHED BETWEEN V-BELT AND PULLEY. TORE OFF END OF RIGHT THUMB AND THUMBNAIL.