While removing radiator from Cat 988B loader, EE inadvertently stepped off the counter weight and fell to the ground approximately 4.5 feet fracturing left elbow and possibly left hip.
HANCOCK QUARRY: 78 citaciones de la MSHA Metal/Non-Metal
HANCOCK QUARRY tiene $9K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en HANCOCK QUARRY.
- Muertes
- 0
- Incidentes totales
- 41
- Años en registro
- 1986–2021
- Último incidente
- Jul 2021
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.HANCOCK QUARRY tiene $9K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-08-26
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz265 en exceso
- Respirable dust, <.1mg8
- Unlisted Particulate, respirable, <1% Qtz2
Ver los análisis individuales (36)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2018-07-19 | Quartz, respirable, >1% Qtz | 0.87 | 0.51 | 1.71 | Crusher Oper/Worker |
| 2018-07-19 | Quartz, respirable, >1% Qtz | 1.41 | 0.53 | 2.66 | Truck Driver |
| 2006-05-24 | Quartz, respirable, >1% Qtz | 0.55 | 0.48 | 1.15 | Crusher Oper/Worker |
| 2005-06-16 | Quartz, respirable, >1% Qtz | 0.85 | 0.73 | 1.16 | Crusher Oper/Worker |
| 2003-11-04 | Quartz, respirable, >1% Qtz | 0.61 | 0.51 | 1.20 | Crusher Oper/Worker |
| 2025-08-26 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2025-08-26 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2021-07-08 | Quartz, respirable, >1% Qtz | 0.17 | 0.43 | 0.40 | Crusher Oper/Worker |
| 2021-07-08 | Quartz, respirable, >1% Qtz | 0.26 | Front-end Loader Operator | ||
| 2021-07-08 | Quartz, respirable, >1% Qtz | 0.14 | Truck Driver | ||
| 2021-07-08 | Quartz, respirable, >1% Qtz | 0.34 | Crusher Oper/Worker | ||
| 2019-12-04 | Respirable dust, <.1mg | 0 | Bulldozer Operator | ||
| 2019-12-04 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2019-12-04 | Unlisted Particulate, respirable, <1% Qtz | 0.46 | Truck Driver | ||
| 2019-12-04 | Unlisted Particulate, respirable, <1% Qtz | 0.17 | Laborer, Bullgang | ||
| 2018-08-28 | Quartz, respirable, >1% Qtz | 0.14 | 0.52 | 0.27 | Truck Driver |
| 2018-08-28 | Quartz, respirable, >1% Qtz | 0.13 | 0.45 | 0.29 | Crusher Oper/Worker |
| 2018-07-19 | Quartz, respirable, >1% Qtz | 0.61 | 0.68 | 0.90 | Crusher Oper/Worker |
| 2014-05-29 | Quartz, respirable, >1% Qtz | 0.47 | 0.69 | 0.68 | Truck Driver |
| 2014-05-29 | Quartz, respirable, >1% Qtz | 0.17 | 0.42 | 0.40 | Backhoe Operator |
| 2014-05-29 | Quartz, respirable, >1% Qtz | 0.13 | 0.57 | 0.23 | Laborer, Bullgang |
| 2014-05-29 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2008-05-22 | Quartz, respirable, >1% Qtz | 0.27 | 1.22 | 0.22 | Laborer, Bullgang |
| 2008-05-22 | Quartz, respirable, >1% Qtz | 0.32 | 0.57 | 0.56 | Crusher Oper/Worker |
| 2008-05-22 | Quartz, respirable, >1% Qtz | 0.41 | 0.74 | 0.55 | Truck Driver |
| 2008-05-22 | Quartz, respirable, >1% Qtz | 0.45 | 0.64 | 0.70 | Crusher Oper/Worker |
| 2006-05-24 | Quartz, respirable, >1% Qtz | 0.65 | 0.71 | 0.92 | Crusher Oper/Worker |
| 2006-05-24 | Quartz, respirable, >1% Qtz | 0.45 | 0.94 | 0.48 | Jackhammer Operator |
| 2005-06-16 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2005-06-16 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2005-06-16 | Quartz, respirable, >1% Qtz | 0.17 | 0.66 | 0.26 | Backhoe Operator |
| 2005-06-16 | Quartz, respirable, >1% Qtz | 0.55 | 0.93 | 0.59 | Truck Driver |
| 2003-11-04 | Quartz, respirable, >1% Qtz | 0.26 | 1.91 | 0.14 | Truck Driver |
| 2003-11-04 | Quartz, respirable, >1% Qtz | 0.45 | 0.85 | 0.53 | Drill Operator, Rotary Air |
| 2003-11-04 | Quartz, respirable, >1% Qtz | 0.25 | 0.37 | 0.68 | Utility Man |
| 2003-11-04 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker |
HANCOCK QUARRY registró 23.99 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2021.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2021 * | 23.99 | 23.99 | 0.000 |
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 7.48 | 0.00 | 0.000 |
| 2018 * | 7.22 | 7.22 | 0.000 |
| 2017 * | 18.96 | 12.64 | 0.000 |
| 2016 * | 7.46 | 7.46 | 0.000 |
| 2015 * | 22.54 | 7.51 | 0.000 |
| 2014 * | 8.44 | 8.44 | 0.000 |
- Sullivan Highway Products Inc 1950 a 1988
- Sullivan Lafarge 1988 a 1994
- Cobleskill Stone Products Inc 1994 al presente
| Año | Empleados |
|---|---|
| 2026 | 9 |
| 2025 | 7 |
| 2024 | 8 |
| 2023 | 7 |
| 2022 | 6 |
| 2021 | 11 |
| 2020 | 11 |
| 2019 | 12 |
| 2018 | 12 |
| 2017 | 13 |
| 2016 | 12 |
| 2015 | 13 |
| 2014 | 11 |
| 2013 | 10 |
| 2012 | 11 |
| 2011 | 8 |
| 2010 | 10 |
| 2009 | 12 |
| 2008 | 19 |
| 2007 | 19 |
| 2006 | 14 |
| 2005 | 13 |
| 2004 | 13 |
| 2003 | 12 |
| 2002 | 13 |
| 2001 | 14 |
| 2000 | 14 |
HANCOCK QUARRY se ubica en Delaware County, New York, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 5,462 | 0 | 0 | 0.0 |
| 2026 Q1 | 2,872 | 2 | 0 | 696.4 |
| 2025 Q4 | 4,214 | 0 | 0 | 0.0 |
| 2025 Q3 | 5,270 | 2 | 0 | 379.5 |
| 2025 Q2 | 4,463 | 0 | 0 | 0.0 |
| 2025 Q1 | 2,831 | 0 | 0 | 0.0 |
| 2024 Q4 | 4,249 | 0 | 0 | 0.0 |
| 2024 Q3 | 6,129 | 3 | 0 | 489.5 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 4,662 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,353 | 0 | 0 | 0.0 |
| 2023 Q4 | 2,903 | 1 | 0 | 344.5 |
| 2023 Q3 | 4,927 | 1 | 0 | 203.0 |
| 2023 Q2 | 3,752 | 0 | 0 | 0.0 |
| 2023 Q1 | 2,428 | 0 | 0 | 0.0 |
| 2022 Q4 | 3,280 | 0 | 0 | 0.0 |
| 2022 Q3 | 5,135 | 0 | 0 | 0.0 |
| 2022 Q2 | 3,244 | 0 | 0 | 0.0 |
| 2022 Q1 | 2,011 | 0 | 0 | 0.0 |
| 2021 Q4 | 6,417 | 0 | 0 | 0.0 |
| 2021 Q3 | 8,494 | 1 | 0 | 117.7 |
| 2021 Q2 | 7,342 | 0 | 0 | 0.0 |
| 2021 Q1 | 2,756 | 1 | 0 | 362.8 |
| 2020 Q4 | 4,816 | 0 | 0 | 0.0 |
| 2020 Q3 | 9,915 | 1 | 0 | 100.9 |
| 2020 Q2 | 6,883 | 0 | 0 | 0.0 |
| 2020 Q1 | 3,348 | 0 | 0 | 0.0 |
| 2019 Q4 | 5,994 | 4 | 0 | 667.3 |
| 2019 Q3 | 9,307 | 0 | 0 | 0.0 |
| 2019 Q2 | 7,767 | 1 | 0 | 128.7 |
| 2019 Q1 | 3,663 | 2 | 0 | 546.0 |
| 2018 Q4 | 4,971 | 0 | 0 | 0.0 |
| 2018 Q3 | 9,865 | 5 | 2 | 506.8 |
| 2018 Q2 | 9,200 | 0 | 0 | 0.0 |
| 2018 Q1 | 3,649 | 0 | 0 | 0.0 |
| 2017 Q4 | 8,848 | 0 | 0 | 0.0 |
| 2017 Q3 | 12,034 | 0 | 0 | 0.0 |
| 2017 Q2 | 8,143 | 2 | 0 | 245.6 |
| 2017 Q1 | 2,627 | 0 | 0 | 0.0 |
| 2016 Q4 | 6,357 | 0 | 0 | 0.0 |
| 2016 Q3 | 9,503 | 0 | 0 | 0.0 |
| 2016 Q2 | 7,502 | 1 | 1 | 133.3 |
| 2016 Q1 | 3,438 | 1 | 0 | 290.9 |
| 2015 Q4 | 6,510 | 0 | 0 | 0.0 |
| 2015 Q3 | 7,882 | 0 | 0 | 0.0 |
| 2015 Q2 | 8,062 | 0 | 0 | 0.0 |
| 2015 Q1 | 4,164 | 2 | 0 | 480.3 |
| 2014 Q4 | 6,105 | 1 | 0 | 163.8 |
| 2014 Q3 | 8,099 | 0 | 0 | 0.0 |
| 2014 Q2 | 7,316 | 4 | 1 | 546.7 |
| 2014 Q1 | 2,165 | 0 | 0 | 0.0 |
| 2013 Q4 | 3,469 | 0 | 0 | 0.0 |
| 2013 Q3 | 7,409 | 0 | 0 | 0.0 |
| 2013 Q2 | 7,073 | 0 | 0 | 0.0 |
| 2013 Q1 | 3,027 | 0 | 0 | 0.0 |
| 2012 Q4 | 4,417 | 0 | 0 | 0.0 |
| 2012 Q3 | 6,866 | 0 | 0 | 0.0 |
| 2012 Q2 | 7,155 | 1 | 0 | 139.8 |
| 2012 Q1 | 3,087 | 1 | 0 | 323.9 |
| 2011 Q4 | 3,420 | 0 | 0 | 0.0 |
| 2011 Q3 | 5,964 | 2 | 0 | 335.3 |
| 2011 Q2 | 3,886 | 0 | 0 | 0.0 |
| 2011 Q1 | 3,105 | 0 | 0 | 0.0 |
| 2010 Q4 | 5,036 | 0 | 0 | 0.0 |
| 2010 Q3 | 6,752 | 7 | 4 | 1036.7 |
| 2010 Q2 | 4,998 | 0 | 0 | 0.0 |
| 2010 Q1 | 2,704 | 0 | 0 | 0.0 |
| 2009 Q4 | 5,486 | 0 | 0 | 0.0 |
| 2009 Q3 | 9,196 | 3 | 1 | 326.2 |
| 2009 Q2 | 5,393 | 0 | 0 | 0.0 |
| 2009 Q1 | 2,284 | 0 | 0 | 0.0 |
| 2008 Q4 | 4,648 | 0 | 0 | 0.0 |
| 2008 Q3 | 10,819 | 0 | 0 | 0.0 |
| 2008 Q2 | 11,632 | 1 | 0 | 86.0 |
| 2008 Q1 | 5,684 | 0 | 0 | 0.0 |
| 2007 Q4 | 6,338 | 0 | 0 | 0.0 |
| 2007 Q3 | 9,655 | 0 | 0 | 0.0 |
| 2007 Q2 | 8,607 | 0 | 0 | 0.0 |
| 2007 Q1 | 2,919 | 0 | 0 | 0.0 |
| 2006 Q4 | 6,874 | 3 | 0 | 436.4 |
| 2006 Q3 | 12,069 | 0 | 0 | 0.0 |
| 2006 Q2 | 7,405 | 1 | 0 | 135.0 |
| 2006 Q1 | 3,610 | 0 | 0 | 0.0 |
| 2005 Q4 | 6,077 | 0 | 0 | 0.0 |
| 2005 Q3 | 8,890 | 0 | 0 | 0.0 |
| 2005 Q2 | 7,873 | 6 | 2 | 762.1 |
| 2005 Q1 | 4,639 | 0 | 0 | 0.0 |
| 2004 Q4 | 6,647 | 0 | 0 | 0.0 |
| 2004 Q3 | 6,521 | 0 | 0 | 0.0 |
| 2004 Q2 | 8,226 | 0 | 0 | 0.0 |
| 2004 Q1 | 3,292 | 0 | 0 | 0.0 |
| 2003 Q4 | 7,366 | 3 | 1 | 407.3 |
| 2003 Q3 | 8,434 | 0 | 0 | 0.0 |
| 2003 Q2 | 5,322 | 0 | 0 | 0.0 |
| 2003 Q1 | 2,305 | 0 | 0 | 0.0 |
| 2002 Q4 | 7,078 | 0 | 0 | 0.0 |
| 2002 Q3 | 12,114 | 0 | 0 | 0.0 |
| 2002 Q2 | 6,843 | 0 | 0 | 0.0 |
| 2002 Q1 | 3,456 | 0 | 0 | 0.0 |
| 2001 Q4 | 7,504 | 0 | 0 | 0.0 |
| 2001 Q3 | 10,281 | 11 | 1 | 1069.9 |
| 2001 Q2 | 8,085 | 0 | 0 | 0.0 |
| 2001 Q1 | 4,868 | 0 | 0 | 0.0 |
| 2000 Q4 | 8,277 | 0 | 0 | 0.0 |
| 2000 Q3 | 11,689 | 1 | 0 | 85.6 |
| 2000 Q2 | 8,768 | 0 | 0 | 0.0 |
| 2000 Q1 | 4,587 | 0 | 0 | 0.0 |
Incidentes reportables
41 en archivo2021 · 3 incidentes
While replacing a screen on wash plant another EE was using a pry bar to align the new screen, the other EE did not see EE's hand in the way and struck EE's hand with the pry bar causing a laceration between EE's ring and pinky finger of EE's right hand. 2 stitches at ER.
While pulling pin from bucket, pin fell on hand breaking the left little finger and lacerating same finger - broken finger with 3 stitches.
2019 · 1 incidente
While cutting steel with acetylene torches EE's shirt caught on fire. EE suffered burns/blisters on hand and stomach.
2018 · 1 incidente
Removing rocks from plugged head pulley discharge box, EE initially reported right shoulder strain (9/10), worked 9/7, 9/10, & 9/11. On 9/11, EE sought medical treatment for left shoulder pain.
2017 · 3 incidentes
While cleaning syntron pan a bar fell and struck EE on the chin causing a contusion to chin and lip.
While removing rock from discharge conveyor EE slipped and struck head on sledge hammer
While moving full barrels of oil, EE managed to pinch wrist/forearm between barrels. Pinch/crush injury, no fractures.
2016 · 1 incidente
EE complained about a sore right knee from driving a loader.
2015 · 3 incidentes
While connecting hoses to Sanvic crusher, EE stood up and cut head on a piece of channel iron.
While disassembling a crusher a wrench on a bolt slipped off the bolt striking employee above left knee. Employee did not report that he was injured until 7/13/2015
While pounding wedges into crusher to disassemble it, a piece of the steel wedge broke off penetrating the employee's abdomen. Employee has a follow up outpatient surgery to remove the object.
2014 · 1 incidente
While reaching to remove a rock from conveyor EE felt a sharp pain in his back, 5-10lb rock.
2011 · 2 incidentes
After exiting his pickup truck ee slipped on ice and twisted his left knee.
While ee was installing a conveyor belt, EE was using a cutting torch to remove bolts, the torch somehow got entangled in sleeve of leather welding jacket causing torch head to pull into his sleeve causing second degree burn to his left forearm.
2008 · 6 incidentes
While removing obstruction from jaw crusher, lifting chain broke, cutting EE's finger.
While cleaning loader bucket with air gun, debris came up and over safety glasses entering his eye.
While cutting metal from crusher, hot metal fell on employee's arm causing a burn.
While exiting truck EE closed the door on left middle finger.
While cutting metal with acetelene torch debris entered EE's eye causing iritation.
While grinding metal debris entered EE's eye causing irritation.
2007 · 1 incidente
While preparing a vehicle in the shop, employee struck his forehead on vehicle crossmember (transmission) lacerating his forehead.
2004 · 1 incidente
WHILE ATTEMPTING TO REMOVE A CONVEYOR, THE MECHANISM THAT WAS STABILIZING IT FAILED. AS A RESULT, THE CONVEYOR AND THE INDIVIDUAL DROPPED CAUSING THE EMPLOYEE TO LOSE HIS FOOTING AND BALANCE RESULTING IN HIM FALLING ON HIS RIGHT ARM ONTO THE CONVEYOR. THIS RESULTED IN THE EMPLOYEE BREAKING HIS UPPER RIGHT ARM.
2000 · 1 incidente
EMPLOYEE WAS PICKING UP STEEL WHEN IT SLID AWAY FROM HIM PINCHING HIS INDEX & MIDDLE RIGHT HAND FINGERS TO THE GROUND.
1999 · 2 incidentes
EE WAS CLIMBING OFF HIS LOADER WHEN HE SLI-PPED OFF BOTTOM STEP CAUSING HIM TO FALL AND HIT HIS WRIST.
EE WAS ON TOP OF THE BAGHOUSE CLEANING OUT DUST WHEN HE ACCIDENTLY BUMPED THE DOOR TO THE BAGHOUSE AND IT SLAMMED HIS FOOT AS IT FELL DOWN.
1998 · 1 incidente
EE WAS STANDING ON THE GOOSENECK (TRAILER) WHILE ASSISTING WITH THE LOADING OF A CONVEYOR ON TRAILER. THE CONVEYOR SHIFTED FORWARD, DURINGH LOADING AND PINCHED EE'S TOES. TOES PINCHED BETWEEN CONVEYOR AND GOOSENECK.
1997 · 2 incidentes
EE WAS PUTTING A TRACK BACK ON BOBCAT EXCAVATOR. TRACT SLIPPED OUT OF HIS HAND AND PINCHED HIS RIGHT HAND IN BETWEEN THE TRACK AND FRAME.
EE WAS OPERATING THE LOADER ON BUMPY ROAD CONDITIONS.
1996 · 3 incidentes
EMPLOYEE WAS LIFTING A ROCK, WEIGHING APPROX. 100 LBS WITH HIS RIGHT HAND. HE MOVED THE ROCK ABOUT 1 FOOT AND FELT A SHARP PAIN RUN THROUGH HIS BACK. THE PAIN CAUSED HIM TO GET VERY WEAK.
EMPLOYEE WAS LIFTING THE SCREEN FOR THE SCALPER AT THE SECONDARY PLANT TO POSITION IT CORRECTLY WHILE LIFTING SCREEN HE TURNED TO THE LEFT,PULLING A MUSCLE IN HIS BACK.
WHILE INSTALLING A NEW TAPER LOCK ON A SHAFT IN A NEW HEAD PULLEY EE PINCHED PALM OF RIGHT HAND IN THE SPREAD OF THE TAPER LOCK WHEN THE SCREWDRIVER SLIPPED OUT.
1994 · 1 incidente
EMPLOYEE WAS OPERATING THE LOADER PICKING UP BOULDERS. A LARGE BOULDER ROLLED OFF THE BUCKET CAUSING THE LOADER TO JERK. THE EMPLOYEE FELT HIS BACK PULL AND PAIN SHOT DOWN HIS LEFT LEG.
1990 · 2 incidentes
HIT HEAD ON PIECE OF SCREEN CLOTH.HARD HAT PUSHED OFF -CUT FOREHEAD ON EDGE OF SCREEN CLOTH.
OPENING PAILS WITH KNIFE, IT SLIPPED PUNCT. L ARM
1989 · 2 incidentes
THE EUCLID THE EMPLOYEE WAS DRIVING WAS BEING LOADED BY A POWER SHOVEL AND HIS BACK WAS JOLTED DURING THE PROCESS, ACCIDENT WAS NOT REPORTED UNTIL 9/13/89.
SLIPPED ON ICE AS HE WAS GETTING OUT OF PERS VEHICLE
1988 · 2 incidentes
HIT L ARM ON DRILL BOOM WHILE CHANGING DRILL STEELS BROKE ARM INJURY OCCURRED ON 10-18-88 AND WAS NOT REPORTED TO SUPERVISOR UNTIL 10-19-88
EMPLOYEE WAS CARRYING POWDER AT THE SHOT WHEN HE SLIPPED AND STRAINED MUSCLE IN GROIN AREA.
1986 · 2 incidentes
DIRT IN EYE SWE5LED UP THE NEXT DAY
PUTTING OUT A F3RE IN A SWITCH BOX HE STUCK HIS HAND THROUGH A WINDOW TO LET THE SMOKE OUT