Buscar en el registro

EMPLOYEE WAS CLOSING DOOR ON BOILER AND HIS FINGER GOT CAUGHT.

EE WAS CLEANING CLINKER HANDLING SYSTEM, WHILE ABOVE HIM MAINTENANCE PERSONAL J0GGED THE BELT CAUSING A LUMP OF CLINKER DUST TO FALL ON HIM

EE REMOVED RADIATOR CAP FROM A DIESEL ENGINE THAHAD JUST BEEN SHUT DOWN. ANTIFREEZE SPRAYED OVERHIM

EE WAS REPLACING DUST COLLECTOR PIPE OVERHEAD AND FELT A PULL IN HIS SHOULDER.

WHILE EMPLOYEE WAS ATTEMPTING TO CLOSE A LARGE KNIFE GATE VALVE WHICH WAS STUCK, HIS LEFT RING FINGER WAS PINCHED BETWEEN HANDLE AND STEM FRAME WHEN VALVE SUDDENLY BROKE LOOSE.

EE OPENED A WINDOW THAT HE THOUGHT AN OUTSIDE CONTRACTOR WAS DONE WORKING ON AND THE TOP WINDOW PANE FELL ON HIM.

EE WAS USING A JACKHAMMER WITH AN 8" BIT TO BREAK UP A LARGE LUMP OF HOT CLINKER. WHEN EXTRACTING THE BIT IT CAME IN CONTACT WITH HIS FOREARM.

EE WAS CHANGING VALVES ON SILO PIPES AND PULLED LOWER BACK WHILE PULLING VALVE OPEN.

ON 6-24-99 EE WAS PULLING UP ON A SAMPLE LINE WHEN HE FELT A PAIN AND AGAIN ON 7-9-99 WHE HE BENT OVER TO LIFT A T-BAR IN PLACE. HE ALSO FELT A LUMP0 IN THE GROIN AREA.

EE STEPPED ON PRESSURE WASHER WAND WHILE WATER WAS ON AND HOT WATER WENT INTO HIS BOOT.

THE THREADED STOCK USED TO PULL THE COUPLING BROKE UNDER PRESSURE, FLEW AND HIT HIS LEFT KNEE AND LEG.

EE WAS WORKING IN BACK OF 1 RAW MILL AND BUMPED HIS HEAD ON THE FEED END TRANSITION CHUTE AND JARRED HIS NECK.

EE WAS REMOVING FOLLOWER PLATE WHEN IT SLIPPED PINCHING HIS FINGER BETWEEN PLATE & PUMP SHAFT

WHILE SHOVELING BUILDUP MATERIAL, INDIVIDUAL STRAINED NECK AND BACK MUSCLES.

SEVERED A PORTION OF THE TIP OF THE RIGHT INDEX FINGER.

FOREIGN OBJEXT GOT IN LEFT EYE WHILE CLEANING OUT A VENT DUCT.

EE WAS LIFTING DUST CONVER LID FROM BELT LINE WHEN IT SLIPPED OUT OF HIS GRASP PINCHING HIS FINGER BETWEEN THE SIDE TAILS OF THE BELT

EE WAS CLIMBING A LADDER CARRYING A C-CHANNEL. THE BEAM FLIPPED IN HIS ARM BRUISING HIS MUSCLE

INDIVIDUAL CLAIMS TO HAVE STRAINED HIS RIGHT SHOULDER WHILE WORKING IN THE CLINKER COOLER, LIFTING METAL

WHILE SUPERVISING EMPLOYEES REMOVING A PIECE OF METAL FROM A CLINKER DRAG, A HEAVY PRY BAR WAS KNOCKED OFF THE DRAG CONVEYOR AND IT FELL ON HIS LEFT FOOT.

REMOVING A HOSE END PLUG EE WAS SPRAYED WITH WATWASTE FUEL DUE TO A BUILD UP OF PRESSURE IN THE HOSE.

EE WAS LIFTING A SECTION BAIL MILL LINER.

REMOVING SPROCKET IN CRUSHER BLDG, FINGER GOT CAUGHT BETWEEN GUARD AND SPROCKET.

STARTED TO HOOK UNLOADING HOSE TO A WASTE FUEL TANKER. HE REMOVED THE END PLUG AND MATEIRAL FROM T HE PREVIOUS LOAD EMPTIED OUT OF THE HOSE ADN SPILLE DON HIS LEGS AND RIGHT FOREARM.

USING A PRY ROD TO BREAK HARDENING CEMENT ON WEIGH SCALES, EMP FELT PAIN IN LEFT SHOULDER AND SIDE.

EE WAS MOVING SHREDDER BLADES WHEN HE FELT SOMETHING POP IN HIS BACK. HE SAT DOWN AND WAS IN PAIN WHEN HE ATTEMPTED TO STAND OR TURN.

ASSISTING IN MOVIGN A BLOWER MOTOR IN THE OLD RAW MILL BUILDING. PLACED MOTOR DOWN AND WALKED OVR TO PICK UP A COME-A-LONG AND FELL TO HIS KNEES. WITH PAIN TO HIS BACK. HAD TO HELP HIM COME DOWN THREE FLIGHTS OF STEPS.

REMOVING GRIZZLEY BARS FROM NO. 4 COLLER--LEFT HAND GOT CAUGHT UNDER BARS PINCHING END OF FINGER (RING).

UNLOADING REBAR WITH CHOKER AND EXCAVATOR LOAD SHIFTED, CHOKER CAME LOOSE, KNOCKED VICTIM TO GROUND.

EE WAS WORKING ON DRIVE LINE GUARD. WHEN HE REMOVED HIS HAND HE CUT HIS FINGER ON A SHARP EDGE.

EE WAS REBULDING #6 FEED PUMP. HE PULLED THE RUNNER FROM THE PUMP AND THE FOLLER PLATE FELL PINCHING HIS HAND BETWEEN THE RUNNER AND FOLLOWER PLATE.

REMOVING BALLS FROM BALL SCREEN IN MILL-BALL REMOVER SLIPPED, MASHING END OF RING FINGER OF LEFT HAND.

EE WAS CHANGING AN IDLER ROLL ON THE LONG DRAG. HE WAS LIFTING A CHAIN BLOCK TO ANOTHER EE WHEN HE FELT SOMETHING PULL IN HIS SHOULDER.

EMPLOYEE WAS SHOVELIGN CLINKER AT #6 FINISH MILL AND PULLED A MUSCLE IN LEFT ELBOW.

EE WAS ATTEMPTING TO REMOVE A SEAL FROM A CAP OF THE SOLVENT TRUCK. STRAP CUT THRU HIS GLOVE LACERATING HIS MIDDLE FINGER OF HIS RIGHT HAND. (SHOULD HAVE USED A CUTTING DEVICE)

EMPLOYEE WAS SHOVELING UNDER INSIDE PAIN WHEN HE FELT PAIN IN THE ABDOMINAL AREA.

DRAGGING KILN CHAIN IN ROTARY KILN--FELT A SUDDEN, SHARP PAIN IN LOWER BACK.

EMPLOYEE HURT HIS BACK LIFTING A 5 GALLON WATER JUG TO PUT ON THE WATER COOLER.

EMPLOYEE WAS REMOVING PLATE FROM CRUSHER WHEN OLD WELD BROKE AND PLATE FELL STRIKING EMPLOYEE'S LEFT HAND AND RIGHT FOOT.

EMPLOYEE WAS REMOVING A LEAD CAP OF A NUCLEAR GAUGE (MEASURES SLURRY) WHEN CAP SLIPPED AND MASHED FINGER (CAP WEIGHED 40-50 LBS).

EMPLOYEE WAS ATTEMPTING TO OPEN A VALVE ON NO.4 KILN DUST LINE-WHILE PULLING ON VALVE, FELT PAIN IN LOWER BACK. EMPLOYEE WAS SENT TO DR. ON JAN 10 BUT DID NOT HAVE ANY PROBLEM UNTIL JAN 20. COULD NOT REPORT TO WORK AT 11PM SHIFT OUT ALSO ON 1-21-, 1-22, 1-23 AND RETURNED ON 1-24.

EMPLOYEE WAS LIFTING BAGS FROM ONE PALLET TO ANOTHER WHEN HE FELT A PULL BY HIS BELLY BUTTON AND OVER THE WEEKEND HIS BELLY BUTTON SWELLED UP.