Buscar en el registro

Large rock was on rock breaker hydraulic line, went to roll rock off line when it rolled catching thumb between rock and frame of breaker causing a small laceration.

Injured was removing dirt off a R60 Hauler with Compressed air, piece of debris went under safety glasses and into their eye

Was removing conveyor belt off welding truck, hit hand against vise, next day hand started hurting. Went to DR took x-ray, would let EE know. They called July 5 and said EE did have piece of metal. They removed it July 6, no stitches, no lost time.

Employee was picking up to 2 - 2.5 gallons of DEF when EE stated EE twisted back causing pain.

Employee was cleaning primary feeder out for repair work when they ran a finger across a sharp metal burr cutting finger that required stitches.

Removing a brass bushing off main shaft of crusher, bushing had oil on it. Another co-worker was helping lift bushing off but hand slipped causing bushing to fall and caught employee's fingers under bushing causing bruising to end of index, middle and ring fingers on right hand.

Employee was working on AC unit for a 988F loader. EE was inside the cab cleaning dust out of the vent when EE cut finger requiring stitches.

Employee was changing a light bulb in the control panel at our pug mill plant. The bulb broke causing a laceration to right index finger tip. Laceration required stitches.

Employee was removing a metal strainer from a pvc line at our Sand plant, when he tried to remove the pvc line from the metal strainer he cut top of left thumb.

Employee operates heavy equipment. He went to climb ladder on a R-60 Euclid Haul truck when he felt pain in his back

Employee was carrying a 4" pipe about 8' long. He went to lay pipe on forks of a lull when he caught finger between pipe and end of fork on lull mashing his finger. He fractured tip of his little finger.

EE was putting new brake pads on dump truck when he felt a strain in lower back. Employee went to doctor and was put on light duty work for 4 days.We are looking into this accident. We had a helper with him, he did not report any injury friday before he left work but came in monday morning first thing and reported back injury.

Employee was helping unload motor, motor slipped, caught rt thumb between motor and truck bed, causing brusing to rt thumb. Doctor put rt hand in a brace.

Employee was down on his knees shoveling material out from under conveyor, when he felt a sharp pain in middle of back. He went to Doctor, told he had some bruising.

EMPLOYEE WAS HELPING CO-WORKER SET CRUSHER LID BACK ON CRUSHER. WHEN HE WAS POSITIONING THE LID, HE CAUGHT HIS RT. RING FINGER UNDER THE LID CAUSING A FRACTURE & FINGERNAIL REMOVAL WHICH REQUIRED STITCHES.

EE WAS HELPING ANOTHER EE REPLACE A STAR PLATE ONTO CANICA CRUSHER. USING A CRANE TO LIFT STAR PLATE (45-50#'S)WHILE UNHOOKING PLATE EE HAD HIS FOOT UNDER PLATE & IT FELL 3-4" ONTO HIS FOOT. CAUSED BRUISED FOOT. EE WAS WEARING HARD TOE SHOES. EE DID NOT GO TO DR UNTIL 4/23/04. EE ON CRUTCHES FOR A WEEK.

EE WAS ROLLING UP TARP ON DUMP TRAILER, TARP WAS HEAVY, HANDLE GOT AWAY FROM EE AND HIT HIS ARM, CAUSING A CONTUSION TO RIGHT ARM REQUIRING HIM TO WEAR A ARM SPLINT.

EE WAS CLEANING OUT CRUSHER THAT HAD BEEN LOCKED OUT WHEN A ROCK FELL AND HIT EE ON HIS RIGHT MIDDLE FINGER.

EE WAS PUTTING A CUTTING EDGE ON 988F LOADER WHEN CUTTING EDGE SLIPPED AND FELL ON EE'S LEFT HAND FINGERS CAUSING TWO SMASHED FINGERS AND ONE BROKE FINGER.

EE WAS CHANGING DRILL BIT WHEN HIS GLOVE GOT CAUGHT BETWEEN BIT AND THREADS OF STEEL CAUSING THE LEFT MIDDLE FINGER TO BE DISLOCATED AT THE MIDDLE JOINT.

EMPLOYEE WAS GETTING IN DOZER, DOOR STARTED CLOSING AND CAUGHT HIS FINGERS IN DOOR, CAUSING CUTS AND SMASHING OF THE MIDDLE AND RING FINGER ON RIGHT HAND.

EE WAS DRILLING HE WENT TO CHANGE DRILL STEEL WHEN HE PICKED UP STEEL HE FELT A POPPING IN LOWER BACK

EE WAS GOING TO CLEAN UP AROUND BOOTH WHEN ROCK CAME OUT OF FEEDER & FELL ON EE'S LEFT FOOT

EE WAS STOCKPILING. AFTER HE HAD DUMPED HIS LOAD OF ROCK HE COULDN'T GET HIS TAILGATE CLOSED, HE WENT TO THE BACK OF THE TRUCK AND SAW ROCK BETWEEN THE BED OF THE TRUCK AND TAILGATE, HE LIFTED UP TAILGATE TO LET ROCK OUT, WHEN HE DID TAILGATE CAUGHT HIS LEFT MIDDLE FINGER AND BROKE IT.

EE WAS SHOVELING MATERIAL OUT FROM UNDER BINS FOR APPROX. 10 MINUTES WHEN HE FELT PAIN IN HIS LOWER BACK AND DOWN HIS LEG.

EE WAS AT THE OLD SHAKER SCREEN, (NOT IN USE) TURNING A SHEAVE TOP REMOVE BELTS. THE COUNTER WEIGHT SHIFTED AND CAUGHT HIS ARM. THERE WAS A PIECE OF SPOT WELD ON THE METAL WHERE HIS ARM WAS AN D WHEN EE WENT TO PULL HIS ARM OUT IT CAUSED A LACERATION TO HIS RIGHT FOREARM.

INJURED WAS HOLDING A PIECE OF PIPE WHILE ANOTHER EMPLOYEE WAS TRYING TO THREAD A GALV. PIPE FITTING INTO THE PIPE, WHEN PIPE SLIPPED, FITTING HIT INJURED IN MOUTH, CAUSING A FRACTURE TO FRONT TOOTH.

TRYING TO REMOVE STONE CAUGHT BEETWEEN CRUSHER AND SHOOT AND IT DISLODGED AND CAUGHT MIDDLE FINGER AND BROKE IT.

UNTHAWING FROZEN BIN DOOR, CYLINDER CAME OUT, SLIP AND FELL INTO BIN TRUCK HURTING (JAMBING) RIGHT THUMB AND PALM.

EE WAS HELPING CHANGE CUTTING EDGE ON LOADER. HE WAS LIFTING UP ON CUTTING EDGE TO LINE UP BOLT HOLES & HE TWISTED HIS BACK.

REPLACING METAL PLATE AND CUT FINGER. 6 STITCHES REQUIRED.

EE WAS EMPTING BINS. THE BIN POLE STUCK ABOUT HALLWAY OPEN AND IT SLAPPED BACK ON HIS LEFT WRIST.

BENT OVER TO PCIK UP GUARD FOR CRUSHER RUN BELT AND PULLED BACK.

WHILE MOVING A DRINK MACHINE THE EMPLOYEE CAUGHT HIS RING FINGER ON LEFT HAND BETWEEN A NAIL IN THE WALL & THE BACK OF THE MACHINE. THE NAIL WENT THROUGH THE SKIN & SCRAPED THE BONE.

INJURED WAS GETTING A TRUCK LOADED FROM THE BIN & HE HAD HIS HAND ON THE BACK OF TRUCK AND A ROCK FELL FROM TOP OF BIN HITTING HIM ON THE HAND. CONTUSION RIGHT INDEX FINGER AND SPLINT WAS PUT ON FINGER.

EMPLOYEE WAS PICKING UP A PIECE OF CROSS TIE. HE WENT TO THROW IT OVER HIS BACK AND HIT HIS HEAD ON A CONVEYOR BRACE CAUSING HIM TO HIT HIMSELF IN THE MOUTH WITH THE TIE.

INJURED WAS INSTALLING A CONVEYOR ROLLER AND HE RECEIVED A LOWER BACK STRAIN. (INJURED DID NOT GO TO DOCTOR UNTIL 02/17/94).

ANOTHER EMPLOYE ETHREW INJURED A BLOCK OF WOOD TO JACK DEDUSTER APART. WOOD JAMMED 3RD FINGER ON RIGHT HAND AGAINST A PIECE OF METAL.

INJURED WAS LIFTING A PIECE OF METAL.

UNLOADING GASOLINE WHICH WAS IN CONTAINERS FROM A PICK UP TRUCK & ONE OF THE CANS GOT HUNG IN THE TRUCK BED & INGURED WAS MOVING TO WARD IT TO GET IT LOOSE & IT RELEASED & JERKED HIS ARM WHEN IT CAME OFF OF THE TRUCK. INJURED WAITED TO SEE BETTER AND HE DID NOT GO TO THE DR UNTIL OCT. 16 & AGAIN ON OCT 30 AND AGAIN ON NOV. 13, 1991.

HE WAS CARRYING BAGS & ABOXES OF POWDER & HE HURT THE LOWER PART OF HIS BACK

HOOKING DRILL UP TO AIR COMPRESSOR & CAUGHT LEFT THUMB BETWEEN TONGUE & HITCH. FRACTURED LEFT THUMB.

INJURED WAS TRYING TO GET THE TAILGATE CLOSED ON THE TRUCK AND THE TAILGATE CLOSED AND IT CAUGHT HIS FINGER BETWEEN THE TRUCK BED AND TILAGATE.

DOING CLEAN UP, WORK WITH HAND SHOVEL, PULLED MUSCLE IN SHOULDER

WHILE REPLACING A CUTTING EDGE ON D8K DOZER. EMPLOYEE CAUGHT RIGHT MIDDLE FINGER BETWEEN EITHER AND OR THE MOLD BOARD & CUTTING EDGE.

INJURED WAS CLEARING ROCK FROM FEEDER HE WAS HOLDING ON TO A PIECE OF METAL & HIT HAND SLIPPED & HE CUT HS ARM ON A ROUGH PIECE OF THE METAL CUT ON RT FOREARM 4 STITCHES

REMOVING BUSHING FROM CRUSHER

EMPLOYEE WAS GETTING SAMPLE OF STONE IN BUCKET AND PULLING IT ON PICK-UP TRUCK. WHEN HE LIFTED BUCKET TO PUT ON TRUCK, EMPLOYEE TWISTED BACK.

IN DROPPING OIL PAN ON ELECTRICAL STARTER LOOSE CONTACT ARCHED ON PAN.

I NAME WAS DRILLING WHEN HE FINISHED THE LENGTH OF STEEL HE HAD TO ADD ANOTHER PIECE IN CHANGING THE STEEL HIS MIDDLE FINGER ON HIS R HAND WAS TWISTED IN HIS GLOVE HE BECAME SORE BUT DIDNT LAS T IT HAS BEEN ORE FOR A FEW DAYS AND HE HAD IT E XRAY FINDING IT WAS BRUISED