Buscar en el registro

Employee was closing a shale gate. The gate did not fully close and EE used the handle lever (detachable square tubing) to strike against the gate. In doing so, EE hit EE's hand on the gate fracturing the tip of EE's left ring finger. Also lacerated the finger the required stitches.

WHILE EMPLOYEE WAS ASSISTING IN CLOSING THE SCREEN CHUTE GATE, EE PLACED RIGHT THUMB IN A PINCH POINT AND INJURED THE RIGHT THUMB. 3 STITCHES TO THE NAIL BED OF RIGHT THUMB.

Employee was installing new drive belts on a conveyor sheave. As employee was rolling the new belt on the sheave their right thumb was caught between sheave edge and belt causing a laceration to thumb.

Employee was cleaning inside of a Reed Gunite Pot and got left hand glove caught between feed wheel and rock shear. Severed tip of middle finger and index finger.

An employee went to take a scoop of stemming rock and pulled a muscle in upper right thigh.

We had two shots today. Halfway through the 2nd shot, I was moving the hose over some drill cutting piles and I felt pain in my scrotum. I went to the ER to be examined by a Dr. After receiving an ultrasound and CT scan, I was told I have 2 Inguinal Hernias that will require surgery to fix.

Employee was attempting to move a metal portable folding explosive sign, when employee lifted the sign the legs folded together pinching the employees right middle finger.

Employee was retrieving equipment following a shot. Employee bent over to check a video camera before turning it off and felt an intense pain in employee's lower back. Employee reported pain while walking and getting in and out of vehicles.

Removing rocks from cat walk on crusher, rock weighted around 150 lbs. pinky finger got between rock and handrail.

Employee was helping to lift a screen. Employee injured shoulder.

OVER A TWO MONTH TIME PERIOD THE EMPLOYEE'S ARM STARTED TO HURT. HE NOTIFIED US ON 9-8-03 AND THEN WENT TO A DOCTOR. UPPER ARM OR SHOULDER STRAIN.

TWO EMPLOYEES WERE MOVING A SCREEN WHEN IT SLIPPED OUT OF ONE'S HAND CUTTING HIS FINGER. HE NEEDED STITCHES ON HIS MIDDLE FINGER.

EE WAS LIFTING A STEEL GRATE AND FELT A PAIN IN LOWER BACK.

EMPLOYEE WAS CLEANING OUT MUD IN AND AROUND THE TAIL PULLY AND THE GUARD WHEN HIS HAND SLIPPED AND HIS RIGHT FOREARM WAS CUT BY THE CORNER OF THE GAURD. PLANT WAS LOCKED OUT.

EE WAS TRYING TO PUSH A PICK UP THAT WAS BEING WORKED ON IN THE SHOP WHEN HE FELT COME PAIN IN HIS LEFT FOOT. PULLED TENDON IN LEFT FOOT.

EE WAS LOWERING THE LIGHT TOWER ON THE LIGHT GENERATING UNTIL AND DID NOT USE THE SAFETY LOCK. THIS IS A NEW PIECE OF EQUIPMENT AND THE EE WAS NOT FAMILIAR WITH THE SAFETY LOCK.

EMPLOYEE WAS DOING ROUTINE MAINTENANCE, HIT HIS LEG ON A ROCK AND NEEDED A FEW STITCHES ON LOWERLEG.

PICKED UP A ROCK AND CUT FINGER.

EMPLOYE EWAS PULLING ON WATER HOSE AND FELT PULLING AND PAIN IN BACK.

EMLOYEE WAS WORKIGN ON CRUSHER WHEN A PART FELL ON HIS LEFT HAND. BROKE RING FINGER ON LEFT HAND.

STEPPED OFF CONVEYOR & TURNED RT ANKLE FX OF RT ANKLE

WAS LIFTING BRAKES & STRAINED LEFT FOREARM BEHIND WRIST

EMPLOYEE SAID HIS LEFT ARM HAS A PINCHED NERVE FROM DOING HIS JOB. HE WAS OFF WORK ON VACATION WHEN HE NOTICED PAIN AND WENT TO DOCTOR. IT WAS REPORTED TO OUR INSURANCE COMPANY AND HE STARTED RECEIVING LOSS TIME CHECKS 11-9-92.

EMPL GETTING OFF A CATWAGON WHEN RING CAUGHT ON WALKWAY OF TRUCK AND LACERATED BOTTOM OF RIGHT HAND RING FINGER.

74339NG ON WATER HOSE PULLED DISC IN LOWER BACK

EMPLOYEE WAS PUTTING LINERS BACK IN COVER OF HAMMERMILL AND PULLED RIGHT SHOULDER.

EE WAS LIFTING GRATES TO PUT IN HAMMER MILL AND HURT BACK.

EE WAS UNLOADING PIPE AND HIS LITTLE FINGER GOT CAUGHT ON PIPE WHILE UNLOADING.

EMPLOYEE WAS LIFTING A 4X8 SCREEN OVER HIS HEAD AND PULLED A MUSCLE IN LOWER BACK.

EMPL WAS CHAINING LOAD ON LOWB0Y & CHAIN SLIPPED & TOOK OFF LEFT THUMB NAIL.

EMPLOYEE WAS CRAWLING OUT FROM UNDER A 769 HAUL UNIT AND RAISED UP STRIKING HIS BACK ON THE BUMPER.

EMPL WAS LOADING ENGINE HEADS ON SRVICE TRUCK OFF OF DOZER. IT FELL ON LEFT LITTLE FINGER.

EMPLOYEE WAS LIFTING CAMSHAFT ASSEMBLE (APPROX. 40 LBS.) OUT OF SCRAPER AND TWISTED TO THE LEFT TO LET IT DOWN ON TIRE OF SCRAPER AND TWISTED BACK OUT OF PLACE.

EMPL I.NAME REMOVING FEED BIN-LARGE METAL PLATE BOLTED TO ROCK CRUSHER-PORTION OF PRIMARY CRUSHER.HE REMOVED BOLTS AND WAS HOOKING UP LIFTING DIVICE-LOADER-WHEN FEED BIN POPPED OUT OF FLANGE.

OUR EMPLOYEE I NAME WAS REMOVING FEED BIN LARGE METAL PLATE BOLTED TO ROCK CRUSHER PROTION OF PRIMARY CRUSHER. HE REMOVED BOLTS AND WAS HOOKING UP LIFTING DEVICE LOADER WHEN THE FEED BIN POPED OUT OF THE FLANGE.