Buscar en el registro

Removing a rubber liner in valve, right pinky got pinched in the valve.

Employee was in the process of dismantling a gear drive when the steel pivot base frame on which it was setting collapsed onto EE's chest.

Employee was closing the door behind employee and got finger caught in the door latch.

The employee attempted to break up frozen clumps of sand in a hopper with their hand and while doing so, their hand twisted in an awkward position resulting in a wrist sprain.

Lifting floor grate and felt a pull in their back.

While doing some service work to a skid steer, employee was reaching into tight area of the machine to remove a hose and EE felt a pop in the front side of their right shoulder.

EE was cleaning up the work area and went to move some jugs of fluid, approximately 2.5 gallons, when EE twisted and tweaked their back.

Employee was finishing service job when closing engine bay door on excavator and pinched finger. Resulted in laceration to finger.

Moving a 4'x4' metal plate of off truck bed and plate slid, catching EE's finger between plate and weld equipment on truck. Fractured tip of left 1st finger.

Employee was doing a plant start up at the wet plant and was shoveling wet material out from manual drop magnet/bucket elevator and felt a pull/sharp pain in lower back.

The employee lost grip of tail pulley and struck their left big toe. The employee suffered a fractured left big toe.

Employee got finger pinched in between two guardrails, while re-installing a catwalk.

Employee was removing a 3 by 5 foot piece of steel plate from an old discharge chute. While moving the plate out of the chute, the employee caught EE's right middle finger between the plate and a structural support beam. Employee fractured tip of finger.

Crew was working to remove an old screen. 2 crew members were on a platform below the screen removing old hydraulic lines & storing them on the platform. While trying to roll the hydraulic lines on the platform, one of the connection ends of a line was stuck on a wall. While pulling the line, the connection end came off the wall striking one of the employees in the nose/face.

Employee assisted another employee lifting a drain pan after emptying diesel fuel into pan. When EE lifted pan EE felt a pull in back. Diagnosed with a muscle strain in the back.

Employee was cleaning the tracks of excavator off with a shovel and felt a pop in left shoulder.

EMPLOYEE WAS RETRIEVING AN ACETYLENE BOTTLE FROM CAGE WHEN THE BOTTLE SLIPPED AND PINNED EMPLOYEE'S FINGER BETWEEN THE BOTTLE AND CAGE. CONTUSION AND LACERATION TO RIGHT INDEX FINGER.

Employee was getting up into fuel truck when EE felt a pop in the back of EE's right ankle.

Employee cut finger on a fan blade inside the cab of a CAT 992 loader.

Employee was unloading 50# boxes of explosives from back of truck. Employee claimed "back seized up". Physician diagnosed Lumbar Strain.

Employee was working on a CAT skid steer. He was trying to engage the bucket locking handle. Bucket swung out and struck employee on the right ankle.

Employee was unpacking a lighting ballast out of the box when he lacerated his right index finger on a safety latch that was on ballast. Required 2 stitches

Employee was assisting 3 other employees to lift a set of clothing lockers up 3 steps. During lift he felt a sharp pain in his right bicep area. He was diagnosed with a bicep tendon tear that will require surgery to repair.

Employee was trouble shooting a brake problem on a scraper. Mechanic found a hose that seemed to be leaking air. He loosened the line slightly to try and reseat the line, while doing so the line popped off and hydraulic fluid punctured his right middle finger.

Employee was applying jumper cables to a crane when the clamp slipped off battery post onto his right index finger.

Employee was pulling a wear plate into position to line up holes. The plate snapped up crushing the right hand ring finger between wear plate and bucket.

Employee was setting a wear plate in the back of a Cat end dump, when plate slipped out of plate clamp and bounced and then landed on left foot.

Employee was searching for the filter of the air conditioning in his loader when he contacted the moving fan blades in the ceiling. Lacerated right hands middle and ring fingers

Employee was climbing off counterweight and strained his right upper arm and shoulder. Employee was wearing fall protection at time of occurence. Employee was diagnosed with strained right arm and placed on restricted work activity.

Employee was doing some maintenance on a piece of equipment. He carried a full 5 gallon bucket to the site, while carrying the bucket he felt discomfort in his lower back. Diagnosed with a lumbar strain and given work restrictions which we will accomodate.

EE WAS TAKING DAMAGED SCREENS OUT OF THE SHAKER. WHILE TAKING SCREENS OUT HE FELT A PULL IN HIS GROIN AREA.

EE WAS WORKING ON CONVEYOR AND HAD TO LIFT THE TAIL WHEEL ONTO WELDING TRUCK. HE HAD ANOTHER HELPING HIM LIFT THE APPROX. 100# TAIL DRUM. WHILE LIFTING HE FELT SOMETHING GIVE IN HIS LOWER BACK . DIAGNOSED WITH A LOWER BACK STRAIN.

EE WAS MOVING A SPEED REDUCER FROM ONE SIDE OF SHOP TO THE OTHER USING THE LIFT & SLIDE METHOD. WHEN HE LIFTED TO SLIDE HE FELT SOMETHING POP IN HIS RIGHT GROIN AREA. HE WAS ALSO COMPLAINING O F PAIN IN HIS LOWER CENTER BACK.

PULLING ON V-BELTS GOT FINGERS BETWEEN V-BELT & SHEAVE CAUSING CUT & FRACTURE TO FINGER.

REMOVING OLD SILT FENCH. PULLING ON SILT FENCE WHEN RIGHT ARM MUSCLE HURT HEN SWELLED UP.

EE WAS LIFTING A STEEL PIPE ONTO A TRAILER. SPRAINED BACK.

EMPLOYEE WAS PREPARING TO HOOK UP HOIST CYLINDER FOR LIFTING INTO 988 CAT LOADER WHILE REHOOKING SLING & CHAIN THE CYLINDER ROLLED OVER HITTING EMPLOYEE ON RT FOOT

REMOVING HYDRAULIC HOSE TO REPLACE BROKE RING,WHEN HOSE WAS LOOSENED, HOT HYDRAULIC OIL SPRAYED ONTO EMPLOYEE'S BODY.

PUTTING BELTS ON CAGE MILL AT STONE QUARRY-BENT OVER HIT HEAD, LEFT SIDE 2" LACERATION BEHIND HAIRLINE. HARD HAT FELL OFF-TRYING TO GET INTO POSITION TO PUT BELTS ON BOTTOM SHIEVE.

REMOVING BUILD UP OF STONE FROM CHANGE OVER CHUTE 8IN STONE CAME DOWN FROM CHUTE CUTTING HIS FINGER ON EDGE OF CHUTE MIDDLE FINGER RT HAND

SAT AM 7-10-93 HELPING CREW OF MEN SHOVEL STONE FROM BETWEEN CONVEYOR BELTS WAS SHOVELING MATERIAL FOR ABOUT 1 HOUR. EE STATES THAT BY FOLLOWING SAT 7-17-93, WHICH DAY HE WORKED HIS BACK WAS G IVING HIM CONSIDERABLE PAIN. LOST TIME DID NOT BEGIN UNTIL 7-21-93. EE PREVIOUSLY HAD SURGERY FOR HERNIATED DIS IN LATE 1979 PERIOD WAS SUPPOSED TO

WHILE INSTALLING GUARD ON TAIL END OF CONVEYOR EMPLOYEE TURNED HIS HEAD SUDDENLY STRIKING HIS RT EYE BROW ON SHARP EDGE OF TAIL SHAFT CUTTING ABOVE EYE BROW REQUIRING 3 SUTURES

WORKING AT STONE BELT-MOVING FROM ONE SIDE OF BELT TO OTHER SIDE. PULLED BACK MUSCLE OR MUSCLE SPASM.

DOING MAINTENANCE- HOLDING METAL FOR WELDER. LAYING ON FLOOR, LEANING IN A HOLE, HOLDING LADDER AND GERDERS FOR MAINTENANCE MEN. EMPLOYEE HAS HAD CONTINUOUS BACK PROBLEMS SINCE 6-19-91.

BUMPED LEFT ELBOW ON CHANNEL IRON. DISREGARDED AT TIME HOWEVER ABOUT A MONTH LATER. TENDINITIS DEVELOPED. WENT FOR MEDICAL TREATMENT 12-27-91.

BENDING OVER WORKING ON REBUILDING ROLLERS FOR CONVEYOR SYSTEM.PULLED MUSCLE IN LOWER BACK.

HELPING TO LOAD STEEL ONTO TRUCK PULLED MUSCLE IN BACK BACK SPRAIN.

CHANGING TIRE TO STACKER WHEEL. BENT OVER TO PICK UP HAMMER PAIN HIT IN BACK COULD NOT GET UP.

STEADYING BEAMS ON CABLE, TWO BEAMS CAME TOGETHER CRUSHING AND LACERATING MIDDLE FINGER LEFT HAND.

EMPLOYEE WAS MOVING USED PLATES (WORN OUT) FOR DISCARD. PREVIOUS DAY LIFTING WEIGHTS AT HOME-WORKING OUT WITH 225 POUND WEIGHTS. SAYS HE NOTICED A TINGLE-IN MUSCLE AREA OF LOWER STOMACH & GROI N AREA.