Buscar en el registro

Replacing screen on screen deck when the screen slipped cutting employee on right calf

Rock became lodged in lift arms of loader. Employee attempted to remove rock when it shifted and smashed EE's finger

While replacing a v-belt guard, the guard slipped and pinched EE's middle fingers.

Cleaning out oversized material chute and banged finger on chute and rock.

Employee was lifting and pushing a support pipe when employee strained right forearm.

Hand slipped from loader door injuring right hand pinkie.

Putting DEF into loader when it splashed into eyes.

Loader engine compartment door fell and hit employee in back of head

Employee went up stairs of loader and hurt EE's right arm

Employee was changing the tracks on the main feed hopper when finger got stuck between two metal plates

Lifting oxygen/acetylene bottle (gas cylinder) from rack to the truck and strained their back

Employee was placing chain back into toolbox when toolbox lid fell cutting employee on head

Working on primary crusher, removing belt clamp, belt clamp still under pressure, when the clamp came loose it pulled back knocking the ratchet from employee's right hand, wedging hand between belt clamp and support bar.

Rock hung in pre-crusher, employee putting a chain around stuck rock, another rock shifted, rolling into employee back

while loosing the clamp of the conveyor belt, the clamp slipped with the weight of the conveyor belt, smashing hand against conveyor belt rails.

slipped, hitting upper right arm on the edge of the loader bucket

EMPLOYEE WAS REPLACING A BELT AT THE CRUSHER AND STRAINED HIS LOWER BACK.

EMPLOYEE WAS REPLACING A RETAINING BOLT ON A HAUL UNIT THAT HOLDS THE CAB TO THE FRAME. IN THE PROCESS, HE FRACTURED HIS LEFT INDEX FINGER.

EMPLOYEE WAS REMOVING THE CARRIER BEARING/PARKING BRAKE ASSEMBLY FROM UNIT 1580 WHEN IT FELL ON HIS RIGHT ANKLE.

EMPLOYEE WAS HANDLING PIPE AND INJURED 4th FINGER OF LEFT HAND. INJURY WAS A LACERATION TO FINGER.

EMPLOYEE WAS CLEANING THE ROCK BOX AT THE WASHING PLANT. THE BOX WAS PUSHED BACK INTO POSITION WHEN HIS LITTLE FINGER RIGHT HAND WAS CAUGHT IN BETWEEN THE BOX FRAME AND THE SHAKER SCREEN FRAME, CUTTING AND BREAKING THE FINGER.

EMPLOYEE WAS PICKING UP A BATTERY TO PUT ON TOP OF ANOTHER COMPANY UNIT AND HURT HIS BACK.

EMPLOYEE CUT HIS LEFT LEG ON A JAGGED PIECE OF METAL WHILE WORKING ON THE SCALPER SCREEN. REPORTABLE DUE TO THE 4 STITCHES TAKEN TO CLOSE THE WOUND.

Employee was replacing a 3 feet section of mud pump pipe when material shifted causing injury.

While getting on the Cat Truck, his left knee popped, causing knee sprain.

Employee smashed right ring finger while replacing bering housing at the crusher.

REMOVING WHEEL BRAKE COVER.

WHILE ATTEMPTING TO ADJUST THE FORKLIFT THE LIFTCAME DOWN ON HIS FOOT

WHILE ATTEMPTING TO REMOVE A TAIL PULLY LEFT THUMB PINCHED BETWEEN PULLY & FRAME

EE WAS ASSISTING IN INSTALLING THE STONE PLANT APRON FEEDER CHAIN ONTO THE DRIVE SPROKETS WHEN MANUEL TENSION WAS RELEASED FROM THE CHAIN, THE CHAIN FLEXED CLOSED CATCHING THE EE'S FINGERTIP T HUS CAUSING A DEEP CUT TO THE RIGHT INDEX FINGER.

WHILE PLACING A GUARD ON THE TAIL PULLEY OF THE LONG BELT, THE GUARD SLIPPED & CRUSHED L INDEX FINGER Y

EE WAS PUSHING A DRIVE SHAFT OUT & IT FELL & HITTHE RIGHT SIDE OF HIS HEAD Y

WHILE CHECKING THE STEERING SYSTEM, EE WAS PINNED BETWEEN THE TIRE AND FRAME. CO-WORKER TURNED THE WHEEL THE WRONG DIRECTION AND PINNED HIM.

EE WAS REPLACING PADDLES IN THE LOG WASHER, METAL SHAVINGS FELL IN HIS LEFT EYE

WHILE FILLING THE LOADER WITH FUEL, SOME SPLASHED IN HIS EYES.

WHILE REPLACING A BELT ON THE CRUSHER, HIS HAND GOT UNDER THE BELT AND REAR PULLEY CAUSING A CONTUSION AND ABRASION TO L HAND.

WHILE CLOSING CRUSHER DOORS, DOOR FELL & CAUGHT RT. FOOT & TOE.

WHILE MOVING ROCKS IN THE FEED HOPPER, L MIDDLE FINGER WAS SMASHED, RESULTING IN LACERATION REQUIRING SUTURES.

WHILE WORKING AND SAND & GRAVEL PLANT-EE STATED HIS BACK R SIDE BEGAN HURTING.

WHILE INSTALLING IDLER ON MAIN BELT; FELT PAIN IN HIS BACK.

WHILE CHANGING OXYGEN BOTTLES, FINGER WAS PINCHED AND HE LOST HIS FINGERNAIL.

EE WAS WORKING ON 980C CAT CLOADER ENGINE WHEN THE JACK HOLDING THE LOADER SLIPPED CAUSING THE LOADER TO DROP APPROX. 12 INCHES PINNING HIS RIGHT FOOT BETWEEN THE CHASSIS AND REAR AXLE. THIS R ESULTED IN A BROKEN RIGHT FOOT.

EMPLOYEE WAS WORKING UNDER THE DASHBOARD OF A 1987 CHEVY PICKUP. WHEN REMOVING HIS ARM FROM UNDER THE DASHBOARD HE CUT HIS LOWER FOREARM ON THE LOWER SEAM OF THE METAL PORTION.

A 3" SHAFT X48" WAS LEANING AGAINST OUTSIDE OF A ROLL UP DOOR WHEN DOOR OPENED SHAFT FELL OVER HIS LEFT INSTEP

EE WAS REFUELING A CATAPILLAR 980C LOADER AND WHEN THE TANK WAS FULL, DIESEL FUEL SPLASHED OUT OF THE FUEL TANK AND INTO THE EE'S EYES, CAUSING IRRITATION OF THE EYES.

EMPLOYEE WAS WORKING ON THE CRUSHER BAR & HIS FINGER WAS CRUSHED BETWEEN THE CRUSHER BAR & A BOLT HEAD.

EE WORKING ON FEEDER AT PRIMARY CRUSHER & GOT DIRT IN EYES.

WORKING IN QUARRY, BRUISED HAND IN LOADER DOOR.

EMPLOYEE WAS DROPPING OIL PANS ON EUCLID. THE PAN TILTED TO THE SIDE AND PINCHED LEFT MIDDLE FINGER AGAINST FRAME CAUSING SMALL CONTUSION TO INSIDE LEFT FINGER.

WAS WORKING ON TAIL PULLEY AND GOT SOMETHING IN LEFT EYE.