Avísenme cuando se presente un nuevo incidente de la MSHA en WEIR PLANT.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 17,872 | 0 | 0 | 0.0 |
| 2025 Q3 | 17,583 | 3 | 0 | 170.6 |
| 2025 Q1 | 12,517 | 0 | 0 | 0.0 |
| 2024 Q3 | 11,170 | 2 | 0 | 179.1 |
| 2024 Q2 | 10,865 | 0 | 0 | 0.0 |
| 2024 Q1 | 6,263 | 2 | 0 | 319.3 |
| 2023 Q4 | 793 | 0 | 0 | 0.0 |
| 2023 Q3 | 15,271 | 2 | 0 | 131.0 |
Rock became lodged in lift arms of loader. Employee attempted to remove rock when it shifted and smashed EE's finger
Employee was walking back from river pump on road, stumbled and caught themselves resulting in them placing all their weight on left leg
Tech got into the back of the service truck to retrieve a hose. While stepping out of the truck, techs foot caught the tailgate of the truck bed and began to fall backwards. Techs hand slipped off the safety handle attached to the service bed and EE continued to fall backwards hitting the ground.
employee was standing between the front end loader access ladder and the front wheel fender checking for oil leaks. Another employee started the loader and the front end loader articulated, pinning the first employee between the ladder and the wheel fender
While working at the water pump area, employee received an insect bite.
Employee stepped out of the manlift basket when EE's right foot rolled under EE causing the ankle to twist.
Starting a water pump when snake surprised the employee causing EE to loose EE's footing hitting EE's right wrist on a nearby gas can.
While swinging sledge hammer, grip slipped, causing thumb on right hand to make contact with chain from chain hoist.
Completed work in the primary crusher hopper, fell when exiting, striking head.
Walking behind scalehouse when they tripped, stumbled and fell. Dislocated left shoulder and fracture on left middle finger.
Cutting a thick piece of rubber with a utility knife and lost EE's grip. Knife slipped cutting the underside of EE's forearm
Conducting plant maintenance activities and became overheated.
While operating a dozer employee was sting multiple times by bees
Lifting oxygen/acetylene bottle (gas cylinder) from rack to the truck and strained their back
While chipping a weld, a piece of slag ricocheted off employee's forehead went behind their safety glasses and struck their left eye.
Employee was placing chain back into toolbox when toolbox lid fell cutting employee on head
Employee was working on the primary, ee foot was over the kick plate on man lift, other employee lifted the basket pinning foot between kick plate and belt
Working on primary crusher, removing belt clamp, belt clamp still under pressure, when the clamp came loose it pulled back knocking the ratchet from employee's right hand, wedging hand between belt clamp and support bar.
Rock hung in pre-crusher, employee putting a chain around stuck rock, another rock shifted, rolling into employee back
EMPLOYEE WAS REPLACING A BELT AT THE CRUSHER AND STRAINED HIS LOWER BACK.
EMPLOYEE WAS GREASING HIS FRONT END LOADER WHEN HE LOST HIS BALANCE AND FELL BACKWARDS HITTING THE LOADER BUCKET. HE RECEIVED A LACERATION NEAR THE ANAL ENTRY AREA REQUIRING STITCHES TO CLOSE THE WOUND.
EMPLOYEE WAS REPLACING A RETAINING BOLT ON A HAUL UNIT THAT HOLDS THE CAB TO THE FRAME. IN THE PROCESS, HE FRACTURED HIS LEFT INDEX FINGER.
EMPLOYEE WAS REMOVING THE CARRIER BEARING/PARKING BRAKE ASSEMBLY FROM UNIT 1580 WHEN IT FELL ON HIS RIGHT ANKLE.
EMPLOYEE CUT HIS LEFT LEG ON A JAGGED PIECE OF METAL WHILE WORKING ON THE SCALPER SCREEN. REPORTABLE DUE TO THE 4 STITCHES TAKEN TO CLOSE THE WOUND.
Employee hit his left elbow climbing out of a hopper. He requested to see a doctor on 01/26/2010, with condition of a contusion and returned to work. The condition did not improve, on 07/09/2010 surgery was completed with employee missing 8 days from work. He returned to work on 07/22/2010.
Employee slipped on loose gravel and injured his left knee. Employee continued to work until 09/28/2008 when he was scheduled. He is now on motion restriction. Medical report was not found until 10/06/2008.
While getting on the Cat Truck, his left knee popped, causing knee sprain.
This is an alleged accident. Loader operator stated that he injured his left wrist. He does NOT know the date of injury and he does NOT know the time of injury. He also does NOT know where the accident took place.
Employee was working on the lights on R40, slipped and hit left foot on U-joint.
Employee smashed right ring finger while replacing bering housing at the crusher.
REMOVING WHEEL BRAKE COVER.
WHILE ATTEMPTING TO ADJUST THE FORKLIFT THE LIFTCAME DOWN ON HIS FOOT
WHILE ATTEMPTING TO REMOVE A TAIL PULLY LEFT THUMB PINCHED BETWEEN PULLY & FRAME
DRIVER ERROR - TRUCK ROLLOVER.
EE WAS PUSHING A DRIVE SHAFT OUT & IT FELL & HITTHE RIGHT SIDE OF HIS HEAD Y