Buscar en el registro

Employee alleges EE was changing fork belt and operator moved forks back and belt was stuck and released resulting in hand abrasion

Employee alleges was installing some grease lines and pulled a utility knife out of their pocket. It slid in EE's hands cutting EE's left palm. EE received stitches.

Employee alleges they were moving cable wires off of a truck and they heard their left shoulder pop.

Employee alleges the day before they were rolling some belting around but they didn't feel any pain until the next day employee wasn't sure if they injured themselves at work. Later after seeking medical attention they stated they did hurt their lower back at work. This is late reporting do to just receiving Dr. notes.

Employee alleges was lifting and pulling some screens at the plant and heard right wrist pop. Employee started losing time on 09/29/22 and then had surgery on 10/18/22. (Late Reporting due to waiting on Dr. notes and information).

Employee alleges employee was removing a drive belt guard on a screen and it popped out and struck employee in right arm and smashing employee's middle finger. Employee received stitches in arm. *Employee had surgery on Nov 14, 2022 and is losing time and is still off work.

Employee alleges was shoveling and EE heard a pop in the lower back.

Employee was placing fuel hose nozzle back in cradle and felt discomfort in EE's side, shoulder and neck. Lifting nozzle from filler neck to hose nozzle cradle.

Employee was changing out a troughing roller when a speck of rust/metal got into employee's right eye. Employee thought employee got metal out of eye, but eye swelled up the next morning, and sought treatment to remove piece of rust/metal.

Employee alleges EE was climbing a ladder to change screens and later that night EE's left knee started swelling. EE was diagnosed with a sprain and was splint.

Employee alleges was removing a bolt from the cutting edge and the sharp edge of the bolt cut the middle palm of left hand.

Employee alleges was holding back the middle deck rubber and turned on the hose and it slipped out of employee's hands and hit employee in the mouth breaking front tooth in half.

Employee alleges ee was hooking up chains to move a conveyor and ee stood up and heard knee pop. Late reporting employee just notified employer on 11/10/17. Employee went to Dr. on 10/23/17 and is now loosing time.

Employee alleges self was cleaning skid loader lock arms and ee attempted to set the attachment lock and it slipped off of the machine and cut left shin. Employee received stitches.

Employee alleges he was putting guards around mini logs and the guards came loose and stuck him in the mouth cutting his lower lip breaking his tooth.

Employee alleges he was reaching for a roller on the ground and he got his arm caught on a piece of metal that went through his right arm - he received 4 stitches.

Employee alleges he was connecting a hose under a machine and the cyl pin came out from the machine and the wedge hit him on the right side of his head causing him to receive stitches.

Employee alleges he was placing blowbars in crusher and the rotar got stuck snapping the bar while his arm was still holding it causing a strain to his right elbow.

Employee alleges he was pulling on pump shaft with his chest against bearing and he felt a sharp pain in his chest.

EE ALLEGES HE WAS LOWERING WIRE OVER HIGH WALL, THE WIRE FLEW OUT OF CONTROL & HIT HIS WRIST.

EE ALLEGES HE WAS PUTTING STRAPS ON A PIECE OF PIPE AND AS HE LIFTED ONE END OF THE PIPE HE FELT A POP IN HIS LT. SHOULDER.

EE ALLEGES HE WAS LIFTING WEAR PLATES WEIGHT ABOUT 70LBS. ON THE DRY PLANT WHEN HE FELT A POP IN HIS BACK.

EE ALLEGES HE WAS JUST FINISHING UP GREASING A 30 GALLON BARREL AND HE FELT SOMETHING PULL IN HIS STOAMCH AREA. (UMBILICAL HERNIA)

EE ALLEGES HE WAS INSTALLING A DREDGE PUMP SHELLAND STARTED FEELING A SHARP PAIN IN HIS BACK.

EE ALLEGES HE WAS BENDING OVER SHOOT DIGGING OUT MUD AND HE STARTED FEELING PAIN IN HIS LOWER BACK.

EE ALLEGES HE WAS PUSHING AND PULLING TRYING TO ALIGN THE CONVEYOR UP AND HE STARTED FEELING PAIN IN HIS BACK AND RIGHT LEG.

EMPLOYEE ALLEGES HE WAS THROWING PIPE WRENCH UP ON WAH PLANT DECK AND HIS FINGER GOT STUCK BETWEEN THE ADJUSTMENT AND WAS SMASHED.

EE ALLEGES SHE BENT OVER TO PICK UP A BOX OF SCALE TICKETS OUT OF THE BOTTOM CABINET AND SHE HEARD HER BACK POPP AND SHE COULDN'T STAND UP.

EE ALLEGES THAT CRANE WASN'T TALL ENOUGH TO REACH OVER THE HANDRAIL, AS HE WAS REACHING HE FELT A PULL IN HIS BACK. CAUSING A STRAIN TO HIS LOWER BACK.

EE ALLEGES HE WAS LIFTING SHOVELING, & PULLING WEAR PLATES INTO POSITION ALL DAY. THAT NIGHT HE STARTED FEELING PAIN IN HIS BACK &GROIN AREA

EE ALLEGES HE WAS CLEANING FROZEN ROCK OUT OF BIN & A WALL OF ROCK BROKE FREE AND HIT HIM IN HISLEFT KNEE

EMPLOYEE ALLEGES HE LIFTED A LARGE SHOVEL FULL OF WET MATERIAL WHILE SCOOPING OUT TUNNEL AND HE PULLED SOMETHING IN HIS GROIN AREA CAUSING A LUMP TO APPEAR.

EE ALLEGES AFTER HE FINISHED DRILLING BORE HOLES, HE CRAWLED UNDER DRILL TO CHANGE HOSE AND HE FELT A PULL IN HIS LOWER BACK.

EE ALLEGES HE WAS PULLING DOWN BINDER TO TIGHTEN CHAINS ON LOAD, BINDER DID NOT SNAP SHUT, IT SPRUNG OPEN AND CUT HIM ABOVE RIGHT EYE.

EE ALLEGES HE WAS LIFTING HEAVY SHAKER SCREENS ON THE DREDGE AND HE FELT TIGHTNESS AND TENDERNESS IN GROIN.

EMPLOYEE ELEDGES HE WAS WORKING ON 3309 TRUCK AND HE WENT TO LIFT HYDRAULIC PUMP AND REACHED TO GET GASKET AND PUMP FELL ON HAND.

EE WAS PICKING FORK UP ON SKID LOADER WHEN LETTING IT DOWN HE CUT LEFT INDEX FINGER RECEIVING 10 STITCHES.

EMPLOYEE WAS LIFTING TANKS INTO TRUCK AND PULLED SOMETHING IN GROIN AREA.

EMPLOYEE WAS PULLING ON WATER HOSE SO HE COULD CLEAN OUT THE TRACKS ON TRACK HOE.

EE WAS CLEANING ROCK OUT OF CRUSHER, & LIFTING TO MUCH WEIGHT AT THE WRONG ANGLE.

EE WAS UNLOADING BEATER BARS WHEN BAR STRAPS BROKE AND WOODEN PALLOT BROKE, DROPPING BARS ON GROUND. HE MOVED BARS TO CLEAR UP WOOD AND NAILS, BAR ROLLED OVER CRUSHING FINGER BETWEEN STEEL TO ED BOOTS AND BAR.

EMPLOYEE WAS PUSHING PULLING & LIFTING WITH HIS BACK WHEN HE WAS TAKING APART THE DREDGE BOAT

EMPLOYEE WAS SITTING ON HOOD & PUSHED ON RAIL WITH FEET & THEW HIPS OUT OF PLACE.

EE WAS CLEANING ROCK OUT OF CRUSHER, & LIFTING TO MUCH WEIGHT AT THE WRONG ANGLE.

TWO EE WERE INSTALLING ADAPTERS AND TIPS ON BUCKET OF THE 475 B LOADER WHEN THE ADAPTER SLIPPED OFF STRIKING TOP OF EE S RIGHT FOOT.

AFTER GRINDING AND DRILLING, EMPLOYEE WASHEED HIS HAND SAND FACE AND MUST HAVE PUSHED OR KNOCKED SOMETHING INTO HSI EYE WHILE WASHING HSI FACE.

EMPLOYEE BENTO OVER & WAS REMOVING A DRILL HOLE PLUG WHEN HE FELT A SHARP PAIN IN HIS LOWER BACK.

EMPLOYEE BENT OVER TO PICK UP A LOADER BUCKET EDGE PROTECTOR AND AS HE DID HIS BACK PULLED AND HE FELT A SHARP PAIN IN THE LOWER BACK.

CABLE WAS LODGED IN THE BANK. EMPLOYEE WAS PULLING IT LOOSE AND STRAINED HIS BACK.

EMPLOYEE WAS PULLING AND LIFTING ON A METAL PLATE. HE DID NOT LOSOE TIME FROM WORK BUT IT WAS NOTED WHEN SURGEION'S REPORT CAME INTO THE OFFICE TODAY, SEPTEMBER 4, TAHT HE HAS A RIGHT INGUINA