Avísenme cuando se presente un nuevo incidente de la MSHA en CLEVELAND QUARRY PLANT #31.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 8,394 | 1 | 1 | 119.1 |
| 2025 Q3 | 7,293 | 0 | 0 | 0.0 |
| 2025 Q2 | 1,561 | 0 | 0 | 0.0 |
| 2025 Q1 | 8,000 | 1 | 0 | 125.0 |
| 2024 Q4 | 2,964 | 0 | 0 | 0.0 |
| 2024 Q3 | 6,219 | 3 | 0 | 482.4 |
| 2024 Q2 | 6,759 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,738 | 0 | 0 | 0.0 |
A transformer caught fire at the surge pile area. 911 was called as it involved electricity. Fire was contained to the box and no miners were exposed to hazard of fire. There were no injuries. Fire contained and extinguished promptly after the arrival of the local fire department. We do not believe the fire lasted over 30 minutes.
Employee alleges was lifting and pulling some screens at the plant and heard right wrist pop. Employee started losing time on 09/29/22 and then had surgery on 10/18/22. (Late Reporting due to waiting on Dr. notes and information).
Employee alleges ee was hooking up chains to move a conveyor and ee stood up and heard knee pop. Late reporting employee just notified employer on 11/10/17. Employee went to Dr. on 10/23/17 and is now loosing time.
Employee alleges employee was tightening screen bolts and employee turned to walk up some steps and employee slipped on the steps and fell down hurting employee's lower back. Employee starting loosing time on 02/15/17.
Employee alleges ee was standing next to a impactor, which was locked out, washing out rock and mud from rotor. When rotor was freed, foot slipped on wet surface and toes were pinched between the rotors and sidewall of crusher. Employee was wearing rubber boots with steel toes.
Employee alleges he was using a cutting torch to cut a V bolt and he removed his gloves to do something and when he went to grab his gloves the torch burned his right fingers.
Our tech arrived to location where tires are stored. Grabbed the tire needed an as he was moving the tire to the bed of the service truck (using the boom) a hydraulic fitting cracked causing a leak of hydraulic fluid causing the tire to drop form the boom hands. Out technician recognized the danger and moved but, the tire bounced hitting our tech in the leg.
Employee alleges he was putting guards around mini logs and the guards came loose and stuck him in the mouth cutting his lower lip breaking his tooth.
Employee alleges he was using a utility knife to cut rubber and the tip of the utility knife cut his pointy finger on his left hand. He received 3 stitches.
Employee alleges he was getting into the loader and he went to step up into the loader with his left hand on the rail and he twisted something in his lower back. He is seeing a chiro.
Ee states that he had just completed dumping and was turned around to make sure the bed was down on the rails while pulling forward. He hit a rut on the dump pad. The bounce of the seat caused him to hit his head on the top of the rear window frame. He received an abrasion to the head and his neck became sore 2 days later.
Employee alleges he was taking a pin off of brakes with a screwdriver and it slipped and went into his right index finger. Employee punctured his finger and had surgery on 05/10/2007.
EE ALLEGES HIM & ANOTHER EE WAS USING THE LOADERTO LIFT THE 3042 JAW BOULDER BREAKER ONTO A FLATBED TRAILER. HE WAS GIVING DIRECTIONS TO THE OPERATOR & HE SLIPPED ON ICE & THE BUCKET CAME DOWN ON HIS RIGHT FOOT
EE ALLEGES HE STEPPED ON CATWALK PLATFORM AND A PIECE GAVE AWAY AND HE FELL TO THE GROUND LANDING ON HIS FEET. THEN FALLING BACKWARDS FROM PLATFORM APPROX 10" OFF THE GROUND.
EMPLOYEE WAS STANDING ON THE CATWALK WITH HIS HAND ON THE RAIL; A ROCK FELL FROM THE SECONDARYSCREEN AND HIT HIM ON TOP OF HIS HAND.