Buscar en el registro

Injury occurred on 5/9/2019. EE did not seek medical attention until 7/11/2019. Was tightening vice and pulled left shoulder.

While using a hammer and chisel, a piece of steel broke and entered left wrist, requiring two sutures.

Pulling on wrench-wrench slipped-put arm down to break fall-sprained wrist

Bending - pulling cuttings away from drill hole w/hoe

Working on spray bar w/pipe wrench, wrench slipped pinching finger between wrench & metal plate.

Moving hoist chain & felt pain in right groin & side.

EE was swinging a sledge hammer, developed pain in neck area.

Swinging hammer, finger pinched between hammer handle and pin causing laceration to left index finger requiring sutures.

Using hammer-hammer slipped pinched thumb between hammer & plate. accident occurred 3/28/08- did not seek medical attention until 4/1/08.

Splicing electrical cable, cutting neoprese with knife. Laceration top, left hand developed skin abscess. Did not report or seek medical attention until 11/17/07.

Striking bushing in clevis - struck finger with hammer. Accident occurred on 10/16/07 - did not seek medical treatment until 10/26/07. Reported treatment date to company on 10/29/07.

Swinging sledge hammer - felt pain

Chipping rust off plate, a particle of rust entered his left eye behind glasses.

Pulling on pry bar, bar slipped, employee fell to ground striking elbow on ground. Did not seek medical attention until 11-6-06. Off work since 11-7-06.

REPAIRING VEHICLE. LYING UNDER VEHICLE, PULLING ON WRENCH. FELT PAIN IN LOWER LEFT ABDOMEN (HERNIA). ACCIDENT OCCURRED ON 2/15/06, WENT TO DOCTOR ON 2/20/06, DISABILITY BEGAN ON 2/22/06.

USING PRY BAR TO ALIGN GUARD ON DRAG PINNION PUSHED ON BAR, FELT PAIN IN HIS NECK.

HOLDING 20LB SLEDGE HAMMER HEAD WITH LEFT HAND TO CHANGE HANDLE, STRUCK WOODEN HANDLE TO REMOVE FROM SLEDGE HEAD WITH 8LB HAMMER AND STRUCK LEFTHAND.

PUSHING ON PRYBAR TO MOVE METAL PLATE, STRAIN ABDOMEN AREA.

RESOCKETING HOIST ROPE ON 8700 DRAGLINE-PULLING WEDGE BACK ON SOCKET-FELLOW EE STRUCK WEDGE WITH SLEDGE HAMMER-HAMMER GLANCED OFF WEDGE STRIKING INJURED EE'S RIGHT HAND. HOLDING PRY BAR.

CHOPPING ICE ON STOPPED BELT LINE (REFUST) WITH 4' BAR PULLED BAR BACK TO STRIKE ICE, HITTING HIMSELF IN MOUTH WITH BLUNT END OF BAR. KNOCKING OUT LEFT FRONT TOOTH & CRACK ON RIGHT FRONT TOOT H MINOR CUT TO GUM

HELPING MECHANIC LOOSEN WHEEL LUGS ON 75 TON HAUL PAK. PULLING ON PIPE & SOCKET WRENCH. STRAIN TO BACK.

STANDING ON GROUND ATTEMPTING TO POSITION REBAR WITH A PRYBAR,DOING SO BY PUSHING UP, THE BAR SLIPPED AND CAUSED UNEXPECTED BODY MOVEMENT.

WORKING ON PA ROLLS,, PULLING ON A COME-A-LONG. COME-A-LONG SLIPPED.

CLOSE DOOR ON RAILROAD CAR, HAD TROUBLE WITH SHUTTING DOOR, HOLDING DOOR WHILE SOMEONE HIT WITH HAMMER, JARRING BACK WITH EVERY SWING.

CLEANING RAILROAD WITH SHOVEL TWISTED BACK

WHILE HOLDING A KNOCKER WRENCH IN PLACE, ANOTHER WORKER WAS HITTING WRENCH TO TIGHTER BOLTS AND ACCIDENTLY HIT HIS THUMB WITH THE SLEDGE HAMMER.

WHILE TRYING TO KNOCK OUT A LINK FROM A CHAIN ON A MAGNET, A PIECE OF CHISEL BROKE OFF, ENTERED LEFT WRIST.

WHILE CLEANING RAILROAD CARS, THE BAR SLIPPED AND HE HURTED HIS HIP.

WHILE HITTING HAMMER OFF PUMP CASING HAMMER SHATTERED AND A PIECE WENT (FLEW) INTO RT MIDDLE FINGER.

USING STEEL BAR TO LIFT PEDESTAL, BAR SLIPPED AND HIT FINGER.

CLEANING RAILROAD CARS. OPENING DOOR ON RAILRAOD CAR. FINGER GOT STU;CK BETWEEN BAR & CAR.

HE WAS HITTING A CHISEL WITH A HAMMER, WHEN A PIECE BROKE OFF AND PUNCTURED HIS HAND.

WHILE MAN WAS TRYING TO OPEN LOCK, LOOKIGN UNDERNEATH COVER OF LOCK, A PIECE OF STEEL BROKE OFF HITTING MAN IN EYE.

OPENING 8" RIZING STEM VALVE WITH 18" PIPE WRENCH. WRENCH SLIPPED & HIT BLANK WELDED ON 2" PIPE.

HEATED ROD TO BEND IN CONE, HIT WITH HAMMER, SLAG WENT INTO EYE.

DRILLER USING METAL WRENCH TO TAKE OFF REMER ATTACHED TO DRILL STEEL

OPENING SPRAYS OF FINE COAL SHAKER WITH A STICK STICK CAME BACK & HIT FACE. BROKE EMPLOYEES PARTIAL.

PUTTING JACK ON 992 HOIST CYLINDER AND JACK SLIPPED AND CUT LEFT PINKY FINGER.

REPAIRING SHAKER, TIGHTENING BOLTS, THE WRENCH SLIPPED & WENT DOWN.

BARRING OUT A ROCK IN THE ROCK CHUTE & BAR FLEW OUT & HIT RIGHT EYE.

REPAIRING FAIRLEAD ON 1150 SHOVL,WHILE CHANGING BOLT'S GREASE SPLASHED IN LEFT EYE.

LOOSENING JAM NUT ON WRIST PIN STRAP WITH HAMMER,CHISEL HIT FINGER.

TIGHTENING A TIMBER BOLT & WRENCH SLIPPED & HE FELL OFF SHAKER ONTO WALKWAY

WHILE HITTING A BAR WITH A SLEDGE HAMMER FINGER GOT CAUGHT BETWEEN HAMMER HANDLE AND BAR.

WORKING ON 30" CYCLONE TAKING APART WITH WRENCHES PULLING ON WRENCH AND PULLED SOMETHING IN BACK.

PUSHING WRENCH WITH LEG.

WORKING ON 8X10 PUMP CRUSHED FINGER BETWEEN WRENCH AND BOLT.

TAMPING A DRILL HOLT AND A FROZEN LUMP FELL OUT OF A LOADER BUCKET AND HIT HIS RIGHT UPPER THIGH.

SWINGING 10 LB SLEDGEHAMMER HITTING A KNOCK WRENCH.

REMOVING MOTOR WITH A COME-ALONG.BOUNCED OUT OF DIRT AND PINCHED LEG BETWEEN MOTOR AND DOOR.