Buscar en el registro

THE INJURED EMPLOYEE WAS HELPING THE MECHANIC REMOVE BOLTS FROM THE BULLDOZER. A IMPACT GUN WAS USED UNSUCCESFULLY. A BREAKER BAR WAS THEN USED. THE SOCKET ON THE BREAKER BAR BROKE AND THE BRE AKER BAR HIT THE EE IN THE MOUTH, BREAKING HIS TOOTH.

CUT LEFT INDEX FINGER WITH A BELT KNIFE WHEN CUTTING DOWN CURTAIN IN RETURN OF LONGWALL.

EE WAS TRYING TO REMOVE A BEARING RACER OUT OF A SCOOP HUB USING HAMMER AND PUNCH. WHILE HITTING PUNCH WITH HAMMER A PIECE OF THE HAMMER CHIPPED OFF AND ENTERED HIS CHEST.

EE WAS TRYING TO FREE WINCH HOOK ON SHIELD WITH PRY BAR, THE PRY BAR SLIPPED AND CAUGHT HIS LEFT RING FINGER.

EE WAS TIGHTENING BOLTS ON THE SCRUBBER OF SCOOP WITH A BOX END WRENCH WHEN THE WRENCH SLIPPED OFF THE BOLT CAUSING HIS FINGER TO JAM INTO CROSSOVER PIPE.

EE WAS USING A PRY BAR TO REMOVE A PIECE OF ROCK FROM THE FEEDER. THE BAR WAS CAUGHT BETWEEN THE ROCK AND A FEEDER FLIGHT. CAUSING THE BAR TO STRIKE THE EE.

EMPLOYEE WAS USING A 4 FT COAL BAR TO PRY OFF MUD BUILD UP IN THE BF 1 BELT CHUTE WHEN THE BAR SLIPPED AND STRUCK HIM ON THE RIGHT SIDE OF THE HEAD AT THE CORNER OF HIS RIGHT EYE. THIS REQUIR ED STITCHES.

EE WAS CUTTING A PIECE OF CURTAIN WITH A BELT KNIFE WHEN THE KNIFE SLIPPED AND CUT LEFT HAND. REQUIRED STITCHES.

EE WAS CUTTING EXCESS BELT OFF ROLLERS WITH A BELT KNIFE AND CUT HIS LEFT FOREARM.

EMPLOYEE WAS USING A HAMMER AND PUNCH TO DRIVE OUT OLD MINER BITS. A PIECE OF THE BIT BROKE OFF STRIKING HIM ON THE BACK OF HIS LEFT HAND AND CAUSING A LACERATION.

EE WAS USING ASLEDGE HAMMER TO KNOCK DOWN A CONCRETE BLOCK BERATTICE. A PIECE OF BLOCK FLEW OFF THE BREATTICE AND HIT HIM ON THE LEFT KNEE.

AS EE WAS PULLING CHUTE WITH A COME-ALONG, THE CHAIN HOOK SLIPPED OFF THE CHAIN AND FLEW BACK STRIKING THE EE ON THE SIDE OF THE FACE CAUSING HIM TO JERK HIS NECK AND SHOULDER.

EMPLOYEE WAS USING CHANNEL LOCKS TO PULL ON A PIECE OF BELT THAT HAD HUNG IN THE TAILPIECE AND STRAINED HIS SHOULDER WHILE PULLING.

EE WAS USING A UTILITY KNIFE TO SPLIT A CABLE FOR SPLICING AND CUT HIS RIGHT THUGH WITH THE KNIFE. THE WOUND REQUIRED STITCHES.

EMPLOYEE WAS CUTTING THE CONVEYOR BELT IN PREPARATION OF MAKING A SPLICE. THE BELT KNIFE SLIPPED AND CUT HIS KNEE. STITCHES WERE REQUIRED TO CLOSE THE WOUND.

EE WAS PRYING ON A CAT PAD. THE PRY BAR SLIPPED AND STRUCK HIS LOWER LIP CAUSING A CUT WHICH REQUIRED STITCHES.

EE WAS USING A WRENCH TO LOOSEN LUG NUTS ON A SHUTTLE CAR WHEEL AND FELT PAIN IN HIS RIGHT SHOULDER.

EE WAS STRIKING A CHISEL WITH A HAMMER TO SEP. TWO DOLLIES, THE CHISEL FLEW UPWARD STRIKING HIMON THE NOSE AND FORCING HIS SAFETY GLASSES INTO THE BRIDGE OF HIS NOSE CAUSING LACERATION.

EE WAS HELPING MAKE A BELT CONVEYOR SPLICE. WHEN HE WAS RELEASING THE TENSION ON THE RED DEVIL THE JACK BAR SLIPPED AND STRUCK HIM ON THE LEFT DCHEEK.

EMPLOYEE WAS CLEANING ROCK UP ALONG #7 BELT AND FELT PAIN IN HIS LOWER BACK.

EE WAS USING A BELT KNIFE WHILE SPLICING A CHARGER CABLE AND CUT HIS LEFT INDEX FINGER.

EE WAS HELPING ANOTHER CHANGE OUT THE SHEAR BITS. THE OTHER EE WAS STRIKING A BIT WITH A HAMMER AND A PIECE OF CARBID FLEW OFF THE BIT, STRIKING THE INJURED IN THE RIGHT ARM.

EMPLOYEE WAS ROLLING UP CURTAIN FOR MINER AND NAILING ABOVE HIS HEAD WHEN HE DROPPED THE HAMMER AND IT STRUCK HIM IN THE MOUTH. EMPLOYEE FIRST SAW DR.SEGEBARTH ON 05/01/01.

EE WAS HOLDING THE BOLT HEAD WITH HIS RIGHT HAND WHILE TIGHTENING THE NUT WITH A PAIR OF CHANNEL LOCKS, HIS RIGHT HAND POPPED ABOVE RIGHT THUMB THEN HE COULDN'T MOVE THE THUMB AWAY FROM HIS PA LM.

EE WAS TAKING BELT LAPPER OFF BELT AND BELT POPPED UP STRIKING HIM ON THE FOREHEAD.

EMPLOYEE STRAINED HIS LEFT UPPER ARM WHILE PULLING STAPLE LOCK HOSE ON #45 SHIELD.

AS EE WAS CUTTING SWITCH AND CONTROL CABLES FOR DOOR THAT WAS BEING TAKEN OUT OF SERVICE, THE SHIEVE FOR THE DOOR WAS HOOKED OVER ROD TRUSS. THE TRUSS CAME LOOSE FROM ANCHOR POINT, FELL ON THE SAFETY LATCH ROPE RELEASE THAT ALLOWED THE DOOR TO FALL. EE'S LEFT HAND WAS CAUGHT BETWEEN DOOR AND DOOR FRAME, DOOR FELL ON BOTH FEET AND INJURED RIGHT THUMB AS WELL.

EMPLOYEE WAS ADJUSTING THE CLUTCH ON A MACK TRUCK WHEN THE WRENCH SLIPPED, CAUSING HIS ELBOW TO STRIKE THE FRAME AND BRUISING HIS ELBOW.

EMPLOYEE WAS LOOSENING RETAINING BOLTS ON A HYDRAULIC PUMP WHEN HE EXPERIENCED PAIN IN HIS BACK. HE SOUGHT MEDICAL ATTENTION ON 7-31-00 AND BEGAN MISSING WORK.

EMPLOYEE WAS PULLING ON BELT WITH CHANNEL LOCKS,LOCKS SLIPPED CAUSING EMPLOYEE TO SLIP AND FALL BAKWARDS, HITTING RIGHT SHOULDER ON TIMBER.

WHILE TRIMMING A BELT SPLICE WITH A KNIFE, EE CUT HIS LEFT LITTLE FINGER.

TAKING STAPLE OUT OF RETURN HOSE ON MONORAIL, WHILE HITTING STAPLE WITH HAMMER, A PIECE OF HAMMER CHIPPED OFF HITTING HIS LEFT WRIST.

CONVEYER CHAIN HAD BROKEN AND HE WAS DRIVING ON LINK WHEN STRAP BROKE OFF AND HIS LEFT ELBOW CUT.

WHILE DRIVING BOOM PIN IN MINER, CAUGHT RIGHT HAND BETWEEN SLEDGE HAMMER AND CONVEYOR BOOM.

EE WAS MAKING A CABLE REPAIR WHEN KNIFE SLIPPED AND CUT HIS LEFT HAND.

EE WAS TRIMMING A RUBBER WATER GAVRD WHEN THE KNIFE SLIPPED & CUT HIS LEFT HAND