Buscar en el registro

THE EE WAS CUTTING THE SEAL ON A CHEMICAL BARRELWHEN HIS KNIFE SLIPPED PUNCTURING HIS HAND. THE RESULTING LACERATION REQUIRED 2 STITCHES TO CLOSE.

EMPLOYEE WAS USING A HAMMER AND PUNCH ON A VALVEEMPLOYE REACHED FOR VALVE. HIT HAMMER ON PUNCH KNOCKING A PIECE OF METAL OFF STRIKING EMPLOYEE' S HAND.

CUT THIRD AND FOURTH FINGERS OF LEFT HAND WHILE TRYING TO CUT BROOM STRAWS TO CLEAN AND CLAY DROP SO HE COULD APPLY MORE SILICONE.

WRENCH SLIPPED OFF OF BOLT AND SMASHED INDEX FINGER ON LEFT HAND IN PELLETIZER HOUSING. DR HAD TO DRILL HOLE IN NAIL TO RELIEVE PRESSURE.

INSTALLING CLAMP ON 375 EXCAVATOR, FINGER WAS PINCHED BETWEEN WRENCH AND BUCKET CYCLINDER. AN IMPROPER WRENCH SIZE WAS USED TO TIGHTEN THE BOLT, CAUSING INJURED EE TO HOLD WRENCH ONTO BOLT HEA D.

EE WAS REMOVING A TOOTH OFF FRM A BUCKET. HE WAS HITTING TOOTH WITH A HAMMER AND A PIECE OF METAL CAME OFF STRIKING HIM IN THE RIGHT ABDOMEN.

WHILE CLOSING DOOR ON RAIL CAR HOPPER, TOOL SLIPPED OFF CATCHING FINGER BETWEEN DOOR AND CROSSFIRE.

HITTING FROZEN MATERIAL (ORE) IN A RAIL CAR WITH METAL BAR. THE FROZEN MATEIRAL BROKE FREE AND NIDDLE FINGER, RIGHT HAND WAS PINCHED BETWEEN BAR AND RAIL CAR.

TIGHTENING 3" FEED PIPE ON MAGNET AND WRENCH SLIPPED AND HIT LEFT THUMB.

WHILE JACKING RAIL CAR UP TRACK, JACK SLIPPED CAUSIGN EMPLOYEE TO SLIP STRAINING MUSSCLES IN LWOER BACK.

HOLDING NUT WITH NUT DRIVER AND ATTEMPTING TO TIGHTEN SCREW WITH SCREW DRIVER AND CUT INDEX FINGER ON RIGHT HAND.

SHOVELING LOOSE SAND, PREVIOUS DUG BY A BACKHOE.NO APPARENT REASON FOR INJURY.

EMPLOYEE WAS SQUATTING DOWN NAILING BOARDS TOGETHER WHEN HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE ATTEMPTED TO DISLODGE A LUMP OF CLAY. REACHED INTO TRANSITION THROUGH CLEAN OUT - REMPVED HAND & HIT SIDE OF TRANSITION WITH HAMMER REACHED BACK IN & LUMP OF COAL FELL PUSHING HAND IN TO ROTARY LOCK BELOW CLEANOUT.

SLINGING SLEDGE HAMMER AND SPRAIN RIGHT WRISST.

WAS STRAIGHTENING LADDER ON KAWASAKI 957 II WITH HAMMER AND SMACKED HIS THUMB.

SMASHED FINGER WITH A HAMMER.....

PORTA-POWER HYD JACK POPPED OUT FROM BETWEEN WORK AREAS AND STRUCK INJURED ON HIS HARD HAT AND THE HART HAT SUSPENSION BAND CAUSED A LACERATION TO HIS FOREHEAD.

EMPLOYEE ALEDGES THAT WHILE TIGHTENING A BOLT ON CRUSHER, THE WRENCH SLIPPED CAUSING HIM TO FALL OVER BACKWARDS.

EE STATES HE WAS CUTTING A 5 GALLON PALSTIC CONTAINER WHEN HIS BALDE BROKE ON THE RAZOR. SLIPPING AND CUTTING HIS LEFT THUMB . IT REQUIRED SOME STITCHES.

EE WAS CUTTING BRIDGE RAIL RUBBER WITH A RAZOR KNIFE WHEN THE KNIFE SLIPPED AND CUT HIM ON THE ARM.

TRYING TO GET THROUGH A THICK AREA OF BRUSH AND A VINE PUSHED HIS BUSH HOOK BACK INTO HIS LEG.

EMPLOYEE WAS STABBED IN RIGHT THUMB WITH BOX CUTTER WHILE REACHING AROUND BIG BAG TO CUT OPEN.

TWO EMPLOYEES WERE ADJUSTING CRUSHER A INJURED EMPLOYEE WAS STRUCK ON LEFT SMALL FINGER BY WEDGE AFTER OTHER EMPLOYEE STRUCK WEDGE WITH SLEDGE HAMMER. THE LEFT SMALL FINGER WAS FRACTURED.

HIT FINGER WITH WRENCH CONTUSION.

BRACES ON TUBE PUMP HAD BROKEN. EMPLOYEE WAS REPLACING BRACE WHEN HE WAS BREADING BOLTS LOOSE, WRENCH SLIPPED CUTTING RIGHT FOREARM.

PORTA POWER (TOOL) SLIPPED & HIT CHIN

ARM HIT A SHEET OF METAL CUT L FOREARM

EMPLOYEE WAS TRYING TO FREE UP ROTORY LOCK WITH 24" PIPE WRENCH, ROTORY LOCK TURNED LOOSE, WRENCH SLIPPED AND HIT HIS FRONT TOOTH.

EE WAS USING RATCHET AND CHEATER BAR TO LOOSEN LUG BOLTS ON DOZER TIVE DIM WHEN SOCKET ADAPTOR BROKE LOWER BACK STRAIN.

MINER WAS PRYING ON A MOTOR WHILE A CRANE WAS ATTACHED TO MTR.W/STRAIN ON HOIST LINE. CRANE OILER UNAWARE OF TRAIN CONTINUED TO PICK CAUSING MTR. TO LEAP OUT AT MINER. MINER WAS HIT IN FACE CA USING LACERATIONS TO LET SIDE OF NOSE & EYEBROW.

I.NAME GOING TO LOWER WINCH ON COUNTER WEIGHT. BELT TAKE UP. WHEN WINCH LET LOOSE. CRANK HANDLE ON WINCH CAME AROUND HITTING EMPL ON CACK OF LEFT HAND.

HIT FINGER WITH HAMMER.

EMPLOYEE WAS USING 1/2 RACHET TO REMOVE A NUT FROM THE GAURD ON 8 X 20 SCREEN WHEN WRENCH SLIPPED CAUSING RIGHT WRIST TO HIT THE GUARD ON SCREEN, EMPLOYEE WAS LIFTING WEAR PLAT ON 966 CAT LOAD ER BUCKET STRAINING LEFT WRIST.

HE WAS TIGHTING A PIPE FITTING AND TWISTED HIS ARM.

STRAINED RT SHOULDER WHILE PULLING ON TORQUE WRENCH

95719ING PTO CABLE SAW HE WAS USING SLIPPED CUT L INDEX FINGER

WHILE TIGHTENING CHAIN BUCK TO SECURE DOZER ON LOWBOY, EMPLOYEE STRAINED LOWER BACK.

EMPL TIGHTENING DOOR AND THE WRENCH SLIPPED AND MASHED THUMB.RECD 6 STITCHES IN THUMB.

REMOVING FISHTAIL BIT AND SUB FROM UNDER TURN TABLE OF DRILL RIG.PULLED MUSCLE IN LOWER BACK.

EMPLOYEE STATES HE WAS STRIKING THE END OF A SHAFT ON A ROTOR FEEDER WHEN HE HIT HIS FINGER AGAINST THE SHAFT CUTTING HIS FINGER.SOME STITCHES WERE REQUIRED.

EMPLOYEE STATES HE WAS CUTTING THE TOP OFF OF A PLASTIC BOTTLE WHEN THE RAZOR UTILITY KNIFE BLADE BROKE STICKING INTO THE JUG EMPLOYEES FINGER SLIPPED OVER BROKE BLADE CUTTING HIS INDEX FINGER SOME STITCHES REQUIRED

EE WAS HITTING PRY BAR WITH HAMMER TRYING TO KNOCK APART THE MOTOR. PRY BAR SHATTERED AND PIECE WENT INTO HIS CHEST UNDER THE RIGHT BREAST.

EMPLOYEE WAS TIGHTENING BOLTS & HAND SCRUBBED OVER A JAGGED STEEL COVER CUTTING HAND

EMPLOYEE WAS PULLING ON A BOLT & IT GAVE WAY CAUSING THE RATCHET TO STRIKE THE EMPLOYEE IN THE MOUTH

EMPLOYEE WAS TRYING TO CLOSE BOXCAR WITH A METAL BAR; BAR SLIPPED AND SMASHED AGAINST SIDE OF BOXCAR. FIGNER SPLINT.

ATTEMPTING TO DISLODGE BOULDER IN JAW CRUSHER WITH STEEL BAR, BOULDER SHIFTED CAUSING BAR TO STRIKE OPERATOR BREAKING FINGER AND WRIST.

I NAME WAS HOLDING A CHUTE THAT WAS PROPPED UP & HAMMERING ON A GATE THAT WAS NOT CLOSED COMPLETELY THE CHUTE THAT WAS PROPPED UP FELL DOWN & PINCHED I NAME FINGERS

WHILE CLAMPING BULK HEAD BANS THE BAN BROKE AND CUT WORKER ON WRIST.

EMPLOYEE STATES HE WAS ADJUSTING #4 FEEDER WITH A 12" CRESCENT WRENCH WHEN THE WRENCH SLIPPED OFF THE NUT STRIKING HIM IN THE MOUTH.