Buscar en el registro

EE WAS PRYING TWO ROCKS THAT WERE STUCK IN CHUTE. THE BAR SLIPPED OUT SMASHING HIS LEFT THUMB THAT WAS BEING USED TO BALANCE.

FALLING MATERIAL CAUSED EE TO LOSE BALANCE AND FALL AGAINST CHUTE.

EE PULLED MUSCLE IN MIDDLE OF BACK WHILE SWINGING A #12 SLEDGE HAMMER, REMOVING LINER WEDGES FROM CONE CRUSHER.

EMPLOYEE WAS SHOVELING ON #4 DECK OF RELIANCE MILL. SHOVEL STOPPED WHEN IT WENT BETWEEN TWO PIECES OF DECKING. THE MOMENTUM CAUSED A JAM TO ARM AND THER WRIST.

EE SUFFERED SHOULDER STRAIN WHILE SWINGING SLEDGE HAMMER PUTTING WEDGES IN CRUSHER

EE WAS HOLDING A WEDGE WHILE ANOTHER EE WAS STRIKING IT WITH A HAMMER THE HAMMER SLIPPED OFF THE WEDGE AND STRUCK THE FIRST EE'S FINGER.

WHILE HAMMERING A PIPE, THE HAMMER SLIPPED AND STRUCK THE LEFT HAND.

EE WAS CUTTING TAPE OFF BOARD HOLDING BOARD WITH LEFT HAND AND HOLDING KNIFE WITH RIGHT HAND. KNIFE SLIPED, POINT OF KNIFE ENTERED LEFT HAND BETWEEN INDEX AND MIDDLE KNUCKLE.

EE WAS CUTTING A STEEL BAND OFF A PARTS DELIVERY BOX AND AS HE CUT THE BAND IT FLEW UP AND IT HIT HIS LEFT INDEX FINGER.

CUT ABOVE RIGHT KNEE WHILE CUTTING CONVEYOR BELT.

WHILE PULLING CONVEYOR BELT TOGETHER TO RESPLICE RING BROKE THEREFORE BELT CLAMP STRUCK EMPLOYEE.

USING A HAMMER TO HIT OFF EDGES FROM A PIECE OF METAL FRAGMENT HIT LEFT EYE BELOW THE GOGGLES.

EMPLOYEE WAS USING A COME-A-LONG AT AN ANGLE. IT BROKE LOOSE AND SMASHED EMPLOYEE'S FINGER BETWEEN CONVEYOR AND BRACKET FOR ROLLER.

EE WAS USING A SLEDGE HAMMER TO LOOSEN BUCKET TEETH WHEN A SPIECE OF METAL STRUCK HIM IN THE LEG.

WHILE WORKING ON 3/4" CR GATE UNDER MILL, THE GEARS ON THE GATE WOULD NOT MESH SO ANOTHER EE STRUCK IT WITH A HAMMER CAUSING A PEICE OF METAL ATO STRIKE EE BELOW THE RIGHT EYE.

WORKING ON SCRUBBER WITH HAMMER & HIT OWN INDEX FINGER.

AFTER CUTTING CARDBOARD BOX OPEN WAS CLOSING KNIFE WITH ONE HAND AND BLADE CUT MIDDLE RT FINGER.

EE WAS CUTTING A 10'X10'X1/2" PIECE OF USED CONVEYOR BELTING WHENHIS KNIFE SLIPPED AS THE BLADE STARTED TO CUT THROUGH A WORN SECTION. HE WAS UNABLE TO STOP THE MOMENTUM OF HIS CUTTING STROKE AND THE BLADE ENTERED HIS LEFT THIGH.

EMPLOYEE WAS CHANGING BEARING ON CONVEYOR BELT, HE TAPPED THE BEARING RACE WITH HAMMER TO CHECK F THE RACE WOULD COME OFF. APIECE OF METAL FROM THE RACE STRUCK EMPLOYEE IN UPPER LEFT THIGH CA USIGN SEVER BLEEDING.

EMPLOYEE WAS SWINGING A SLEDGE HAMMER AND FELT A SHARP PAIN IN HIS LOW BACK AREA.

WHILE OILING THE SHAKER HE TRIED TO PRY THE GUARD AWAY AND THE BAR GOT CAUGHT IN THE FLY WHEEL CAUSING A FRACTURE AND LACERATION TO THE RIGHT HAND.

EMPLOYEE WAS REMOVING A CABLE THAT WAS RUSTED IN A SHACKLE WITH A HAMMER ANND WEDGE A PIECE OF STEEL CABLE SHOT OUT AND PUNCHED HIS LEFT ARM.

EE WAS USING BAR TO DISLODGE ROCK FROM GATE ON MILL WHEN THE GATE CLOSED, RAM PINCHED THE BAR HE WAS USING AND SMASHED AND CUT TWO FINGERS ON HIS RIGHT HAND.

EE WAS USING A SMALL HAND WRENCH TO LOOSEN A RUSTY BOLT AND NUT WHEN HE FELT A PULL IN HIS LOWER BACK.

HIT ELBOW ON SKIRT BOARD AFTER REMOVING DEBRIS WITH A LONG BAR.

WHILE LIFTING BONNETT ON CONE CRUSHER, STEEL BAR SLIPPED AND HIT LEFT SIDE OF FOREHEAD CASUING A LACERATION.

EE WAS CUTTING A V-BELT FOR SOME REPAIR WORK AND THE KNIFE SLIPPED CUTTING HIS LEFT THUMB.

EMPLOYEE WAS CUTTING A PIECE OF RUBBER AND THE KNIFE SLIPPED AND CUT HIS FINGER.

EMPLOYEE WAS DRIVING WEDGES INTO THE PORT. 1 CRUSHER WHEN HE SMASHED HIS LEFT INDEX FINGER BETWEEN A SLEDGE HAMMER AND A POLE.

EMP WAS USING A ROCK BAR TO UNPLUG A CHUTE AND TAPPING IT WITH THE HAMMER TO PUSH IT THRU THE MATERIAL WHEN THE ROCK BAR MOVED AND THE HAMMER MISSED IT, STRIKING EMP IN THE KNEE.

EE WAS USING A WEDGE & DOG WHILE INSTALLING A STEEL PLATE TO RELINE THE BOTTOM OF #2 CRUSHER DISCHARGE CHUTE. AS HE WAS HAMMERING THE WEDGE, A STEEL FRAGMENT BROKE OFF THE DOG & STRUCK HIM IN THE LEFT CHEEK. THE FRAGMENT WAS REMOVED AT THE HOSPITAL E.R. & ONE STITCH WAS REQUIRED.

BEATING ROCKS OUT OF GRIZZLY. ROCK CAME FROM TOPOF GRIZZLY & PINCHED LEFT INDEX FINGER ON SLEDGEHAMMER HANDLE.

EMPLOYEE WAS TRIMMING TABS OFF EURETHANE SCREEN PANELS WITH A RAZOR KNIFE. KNIFE SLIPPED OFF PANEL AND CUT HIS LEFT THIGH.

WHILE MAKING A CUT ON THE BELT END, THE KNIFE SLIPPED OUT OF THE CUT, AND CUT THE UPPER PART OF HIS RIGHT HAND.

WHILE SHOVELING, EE CAUGHT HIS HAND BETWEEN THE SHOVEL HANDLE & METAL FRAME OF A CONVEYOR BELT, SMASHING THE 4TH & 5TH FINGER ON HIS LEFT HAND.

EE WAS USING A HAMMER TO LOOSEN NUT ON BOLTS. WHILE HITTING WRENCH WITH THE HAMMER, HE STRAINED HIS RIGHT WRIST AND THUMB.

WAS UNBOLTING 8" PIPE TO REMOVE IT. PIPE FELL AND LANDED ON FOOT.

A PIECE OF THE SHANK COVER BROKE OFF AND FLEW INTO INNER THIGHT ON LEFT LEG CUTTING LEG AND ARTERY IN LEG.

EE WAS PULLING ON TORQUE WRENCH BECAUSE HE WAS TORQUEING HEAD BOLTS TO 330 LBS.

EE WAS INSIDE SCRUBBER AND COWORKER WAS ON THE OUTSIDE TIGHTENING A BOLT. THE BOLT, UNDER PESSURE, BROKE AND SHOT UP, HITT EE IN THE EYE.

EMPLOYEE WAS INSTLALING STARTED. HE WAS PUSHING ON RATCHET AND THE RATCHET SLIPPED PUSHING HIS THUMB AGAINST FRAME AND BENDING IT BACKWRDS. WAS NOT INFORMED OR RECEIVED INJURY REPORT FROM E PLOYEE UNTIL 6-13-95.

WHILE EMPLOYEE WAS CUTTING A CONVEYOR BELT WITH A LINOLEUM KNIFE, THE KNIFE SLIPPED CUTTING HIS RIGHT THIGH.

EMPLOYEE WAS REMMOVING A ROCK A B-1 (OVERSIZE), THE CHAIN COME-A-LONG (3/4TON) CAME LOOSE LANDING ON EMPLOYEE'S FINGER CUTTING IT.

WHILE SHOVELING UNDER SCREEN DECK, EE HIT SCREEN DECK WITH SHOVEL AND DUST AND SAND FROM THE SCREEN FELL INTO HIS EYES. PLEASE NOTE EE DID NOT NOTIFY US OF THIS INJURY UNTIL 2-27-95.

EMPLOYEE WAS PRYING A PIECE OF IRON OFF A PIPE. A PIECE OF IRON FLEW INTO HIS RIGHT EYE.

EE WAS TRYING TO DISLODGE COMPACTED ROCK, WHICH WAS JAMMED IN THE CRUSHER , WITH A BAR. WHEN THE ROCKS BROKE FREE, THEY CAUSED THE BAR TO JERK INTO HIS FACE, CUTTING IT.

EMPLOYEE WAS HITTING A CHISEL TO LOOSEN UP A UJOINT ON A TRUCK WHEN A PIECE OF STEEL FROM THE HAMMER HE WAS USING BROKE OFF & HIT HIS RT SHOULDER EMPLOYEE DID NOT SEEK MEDICAL ATTENTION FOR TH IS INJURY UNTIL THE NEXT DAY JULY 29 1994

EMPLOYEE WAS USING A 2"X 2' STEEL BAR, WHICH WAS SUPPORTED BY THE FORKS OF A FORKLIFT ADN GREASED SO IT WOULD SLIDE SMOOTHLY, AS A RAM TO HAMMER OUT THE HYDRAULIC TILT PIN OF A DRESSER 560B LO ADER. THE REPETITIVE MOTION OF SLIDING THE BAR TO DRIVE OUT THE SEIZED PIN FOR 30 MIN. OVER A 45 MIN. PERIOD OF TIME CAUSED HIS BACK TO LATER STIFFEN UP.

CLEANING GRIZZLEY ON CRUSHING PLANT. POSSIBLE STRAINED LEFT SHOULDER.

BACK ON 2-2-90, EMPLOYEE WAS USIGN A PRY BAR TO LINE UP THE SCREEN WHILE CHANGING A WIRE CLOTH ON SHAKER AND FELT PAIN IN THE RIGHT SIDE OF HIS GROIN AREA. EMPLOYEE DID NOT SEEK MEDICAL ATTEN TION FOR THIS INJURY UNTIL 2-25-94.