Buscar en el registro

Employee was tightening nut w/socket wrench on expanded metal tail pulley guard. EE removed his glove to perform the task & cut his index finger on the edge of the expanded metal.

EE WAS CUTTING A PIECE OF RUBBER BELTING WHEN THE UTILITY KNIFE HE WAS USING CUT THROUGH THE BELTING AND CUT THE UNDERSIDE OF HIS LEFT FOREARM CAUSING A 3/4" LACERATION.

EE WAS INSTALLING A WHEEL SEAL ON THE LT. REAR DRIVE AXLE OF A BELLY DUMP. AS HE WAS HAMMERING ON THE WHEEL SEAL DRIVER, THE HAMMER STRUCK HIS LT. INDEX FINGER. THIS RESULTED IN A LACERATION THAT REQUIRED STITCHES TO CLOSE. EE WAS USING TOO SMALL OF A HAMMER AND MISSED THE SEAL DRIVING TOOL AND STRUCK HIS LT. INDEX FINGER.

REPAIRING TIRE-REMOVING OBJECT FROM TIRE WITH KNIFE AND CUT FINGER.

CUTTING CONVEYOR BELT FOR SKIRTING, BELT WAS ON THE GROUND, CUTTING IN PULLING MOTION SLIPPING AT END OF BELT AND PUNCTURED LEG.

EE WAS TRYING TO DISLODGE ROCK FROM MOUTH OF JAW CRUSHER WITH A SPUD BAR. ROCK BROKE AS EE WAS PYING BAR BACK HE STRUCK HIMSELF WITH THE BLUNT END OF THE BAR INT HE NAVEL AREA. AGGRAVATING A P RE EXITING CONDITION RUPTURED UMBILICAL CORD.

WAS PRYING STEEL PLATE INTO POSITION TO WELD WHEN BAR SLIPPED AND CUT WRIST ON EDGE OF PLATE.

EMPLOYEE WAS TRYING TO HAMMER A CHAIN LINK TO ROUND IT OUT. THE CHAIN SLIPPED OUT AND THE SLEDGE HAMMER HIT HIS THUMB.

EMPLOYEE WAS CLEARING DIRT WHICH HAD ACCUMULATED AROUND THE TAIL PULLEY OF A CONVEYOR WITH A SHOVEL WHEN HE HIT A ROCK WITH THE SHOVEL CAUSING THE EMPLOYEE TO JAM HIS LEFT WRIST.

WHILE CLEANING OUT CONVEYOR (LOCK OUT FOLLOWED) EMPLOYEE SMASHED FINGER BETWEEN SHOVEL AND STEEL; FINGERNAIL WAS CAUGHT AND REMOVED AT HOSPITAL.

EMPLOYEE WAS HELPING DRIVE PINS OUT OF FRONT END LOADER BUCKET TEETH;HE WAS HOLDING A PUNCH WITH A PAIR OF CHANNEL LOCKS WHILE ANOTHER EMPLOYEE WAS HITTING THE PUNCH WITH A SLEDGE HAMMER; A PI ECE OF METAL FLEW OFF THE PUNCH STRIKING THE EMPLOYEE IN THE NECK.

HIT END OF TOOTH WITH HAMMER PC OF TOOTH BROKE OFF PC OF METAL HIT IN R MIDDLE FINGER

EMPL REMOVING HOOP FOR SPRAY BAR FROM CONVEYOR.HAD REMOVED 2 BOLTS FROM LEFT SIDE AND 1 BOLT FROM RIGHT SIDE AND WAS HOLDING THE HOOP UP WITH LEFT HAND WHILE REMOVING THE LAST BOLT.AS BOLT LOO SENED THE HOOP FELL ACTING LIKE A SCISSORS CATCHING TIP OF LITTLE FINGER LEFT HAND CUTTING OFF TIP.

CUT & PUNCHED LEFT HAND BETWEEN THUMB & FOREFINGER WHILE USING SLIDE BAR TO KNOCK WEDGES OUT OF COMPACT CRUSHER. REQUIRED FOUR STITCHES.

HAMMERING END TIP ONTO A LOADER BUCKET FOREIGN OBJECT METAL CAME UP AND WENT UNDER FACE SHIELD CUTTING SHIELD CUTTING SKIN BELOW L CHIN 3 STITCHES

WHILE REMOVING SOUTH SLOBBER BOLTS ON ROD SCREEN HAD TO PUT ARM UNDER TROUGHING ROLLER TO GET LEVERAGE TO REMOVE BOLT BOLT BROKE WHILE PULLING DOWN ON RATCHET CUT BOTTOM OF CHIN

HIT HIS HAND ON A PIECE OF METAL WHEN HIS WRENCH SLIPPED OFF BOLT HEAD.

REMOVING BOLT WITH WRENCH, WRENCH SLIPPED & MASHED FINGER AGAINST MACHINE. BROKE 3RD FINGER.

WHILE EMPL WAS POUNDING BOLT AT CRUSHER HE SLIPPED ;& HIT LEFT HAND WITH HAMMER.

A NEW CONVEYOR BELT HAD BEEN INSTALLED, BUT TENSION WAS NEEDED ON THE BELT TO INSTALL FLEXCO FASTENERS. A PAIR OF PLIERS WAS CLAMPED ON TO THE BELT TO HOLD THE BELT. A CABLE COME ALONG WAS T IED TO THE PLIERS. THE PLIERS CAME LOOSE, TRAVELED UP THE BELT AND HIT EMPLOYEE ON THE NOSE.

EMPLOYEE WAS TR3MMING A 1" INCH THICK PIECE OF RUBBER, HE HAD HIS FOREARM DOWN ON THE RUBBER TO HOLD IT, AS HE WAS PULLING HIS HAND THE KNIFE SLIPPED AND CUT HIS LEFT FOREARM.