Buscar en el registro

While working on cone crusher feed plate, Plant welder swung sledge hammer, head of hammer came off, ricocheted off feed plate and hit injured on top of left hand. Injured suffered hair line fracture to small bone on hand.

While hammering holes in conveyor belt, IE struck his left pinky finger on tip, with hammer. Tip of finger need stitches to close wound. IE went back to work without any loss time or loss wages and is doing his regular work duties of monitoring his plant.

While using a steel pry bar to dislodge rock from jaw crusher, Injured employee slammed his right hand into side of crusher wall, causing fracture to tip of right index finger. Crusher and conveyors were locked out and Injured was wearing gloves.

INJURED WAS IN SAND SCREW TUB TIGHTENING BOLTS. WHEN HE PULLED BACK ON THE WRENCH HE FELL OUT OF THE TUB. INJURED FRACTURED HIS TAILBONE.

INJURED WAS HAMMERING ON DREDGE PIPE BELL, WHEN HIS HAMMER DEFLECTED OFF TOP RIM OF PIPE BELL AND HIT HIS LEFT LITTLE FINGER.

INJURED WAS SWINGING METAL SHAFT IN HOPES OF LOOSENING CUTTER HEAD ON DREDGE. INJURED SMASHED LITTLE FINGER RIGHT HAND ON CUTTER HEAD ASSEMBLY. INJURED RECEIVED THREE STITCHES AND WAS SENT BAC K TO WORK. NO LOST TIME.

INJURED WAS HELPING MECHANIC REMOVE IRON TOOTH FROM BUCKET OF EXCAVATOR. INJURED WAS HAMMERING ON TOOTH WHEN A PIECE FLEW OFF AND HIT INJURED AT THE BASE OF THE NECK CAUSING A 1" LACERATION. M ETAL WAS NOT IMBEDDED. DR. PUT STITCHES IN AND SENT INJURED BACK TO WORK.

EMPLOYEE WAS CHANGING OUT BUCKET TEETH THE HAMMER SLIPPED SMASHING HIS LEFT HAND PALM

EMPLOYEE WAS REPAIRING BOTTOM FLOOR OF A CHUTE AND WAS USING A 1 INCH PIPE TO PRESS FLOOR PLATE AGAINST ALL READY EXISTING FLOOR WHEN PIPE SLIPPED AND HIT HIM ON HIS LEFT EYEBROW.

INJURED WAS HAMMERING ON A METAL RACE TO A CONVEYOR PULLEY RACE WAS SLIDING OUT BUT NEEDED TO BE HAMMERED ON JUST A LITTLE PIECE OF METAL FLEW OFF METAL RACE & HIT THE INJURED ON THE RT LEG CU TTING HIS FEMORAL ARTERY BLEEDING WAS STOPPED & INJURED WAS TAKEN TO THE HOSPITAL WHERE DOC DID SURGERY

EMPLOYEE WAS CLEANING UNDER THE PLANT & HE SMASHED HIS RT INDEX FINGER BETWEEN A SHOVEL & A ANGLE STEEL BRACE

INJURED WAS HELPING DRAGLINE OPERATOR HAMMER IRON TOOTH OF DRAGLINE BUCKET, USING A SLEDGE HAMMER. METAL PIECE FLEW OFF BUCKET AND HIT INJURED IN RIGHT THIGH. METAL FOREIGN OBJECT WAS EMBEDDED AND HAD TO BE CUT OUT BY THE DOCTOR. DECISION TO CUT OUT WAS LEFT UP TO THE INJURED. DOCTOR TOLD HIM THAT HE COULD CONTINUE TO LEAD A NORMAL LIFT WITH THIS FOREIGN OBJECT IN. HE ELECTED TO HA

EMPLOYEE WAS TIGHTENING A SCREEN CLOTH BY USING A J-BOLT.THE J-BOLT BROKE AND BOUNCED UP,HITTING INJURED ON HIS UPPER FRONT TOOTH#7.

INJURED CLAIMS THAT BEARING ON TAIL PULLEY WAS GOING BAD. INJURED PULLED OFF METAL GUARD AROUND PULLEY AND PROCEEDED TO HIT BEARING AT SHAFT WITH STEEL BAR. INJURED MISSED BEARING AND CAUGHT S TEEL BAR INTO WING PULLEY WHICH SWUNG STEEL BAR INTO FACE OF INJURED.

INJURED WAS WORKING AT CONVEYOR CONTROL HOUSE #6 (RAW MATERIALS BELT). INJURED'S JOB WAS TO KNOCK OFF CLAY BALLS FROM OTHER MATERIAL ON THE CONVEYOR BELT USING A SMALL SHOVEL. INJURED WAS WORK ING WITHIN 1 FOOT OF CONVEYOR BELT. INJURED STATES THAT HE EXPERIENCED SEVERE MUSCLE SPASMS IN HIS UPPER BACK/LOWER NECK AREA FROM DOING THIS JOB.

LOOSING SOME BOLTS ON CRUSHER MANTLE WHEN THE WRENCH USING BROKE HIT HIM ON LOWR ABODOMEN

EMPL WAS SWINGING SLEDGE HAMMER TRYING TO PUT IN GEAR ON CRUSHER. HE WAS SWINGING SLEDGE HAMMER & END OF HANDLE KEPT ONTINUALLY HITTING LEFT ELBOW IN WHICH WEEK LATER HE DEVELOPED LUMP ON EL BOW.

FIELD CONVEYOR STAND VIBRATED OFF SUPPORT BASE. INJURED TRIED TO PUSH CONVEYOR STAND BACK ON BASE WHEN STEEL BAR HE WAS USING SLIPPED CAUSING HIM TO FALL FORWARD INTO THE ROLLER FRAME. INJURED RECEIVED 1 1/2" LONG LACERATION ON HIS LEFT FOREARM REQUIRING SEVEN STITCHES AND NO MEDICATION.

EMPLOYEE WAS REPLACING WORN OUT PADDLES AT LOG WASHER. HE WAS LEANING ON PIPE TO TRY TO TIGHTEN NUTS ON PADDLES. HE CLAIMS HE PUT TO MUCH PRESSURE ON HIS LEFT FOOT, THIS CAUSING HIS LEFT UPPER FOOT TO SWELL UP.

I,NAME AND HIS CO-WORKERS WERE REPLACING WORN OUT PADDLES ON THE LOG WASHER. HE WAS TIGHTENING A BOLT WHEN THE WRENCH SLIPPED CAUSING HIM TO FALL BACK AND HIT HIS COCCYX ON A PADDLE.

I NAME AND OTHE9 WERE PUTTING THE TRACKS ON THE NORTHWEST SHOVEL F-800. THEY WERE USING A SMALL SLEDGEHAMMER TO PUT IN THE PIN CONNECTING TRACKS TOGETHER. HE HIT THE PIN WITH THE SLEDGEHAMMER CAUSING A CHIP3TO FLY AND HIT HIM IN HIS LEFT EYE.

HE WAS TIGHTENI3G BOLTS ON CRUSHER FEEDER WHEN HIS RATCHET SLIPPED OFF OF BOLT AND SMASHED HIS RIGHT THUMB.

I.NAME HELPING 9EPLACE BROKEN CABLE ON NW SHOVEL F-913. TIGHTENING CABLE CLAMPS.GOT LEFT HAND SMALL FINGER CAUGHT BETWEEN CABLE AND WRENCH.SOCKET WAS A SIZE BIGGER THAN THE NUT CAUSING SOCKET TO SLIP. 3

EMPLOYEE WAS HE5PING RAISE SCREENS FOR THE SHAKER AT THE PRIMARY PLANT WHEN HE GOT HIS LEFT INDEX FINGER CAUGHT BETWEEN CABLE AND PULLEY PINCHING HIS FINGER

EMPLOYEE WAS DOING ROUTINE REPAIR WORK IN TUNNEL WHEN A PIPE HE HAD WEDGED IN A DOOR CAME LOOSE HITTING HIM IN THE FACE.

EE CUT HIS LEFT HAND SMALL & RING FINGER WHEN MOTOR FROM A WATER PUMP SLIPPED WHILE THE BOLTS WERE TIGHTEN ONT HE MOTOR.

EMP WAS HOLDING A LINE UP PUNCH AND HITTING THE END OF PUNCH WITH A HAMMER TO REMOVE PIECES OF PLATE LEFT GLUED TO THE SIDE WALLS OF JAW CRUSHER. A PIECE OF STEEL FROM PUNCH FLEW AND EMBEDDED ON HIS RIGHT KNEE

EMP WAS GREASING BUCKET FROM TEREX LOADER WITHA HAND GREASE GUN THE GUN NOZZLE MANAGED TO GET STUCK SO EMP JERKED IT LOOSE BUT HIT HIS LEFT INDEX FINGER AGAINST THE HEAVY STEEL ARM OF LOADER I IN DOING SO

EMPLOYEE WAS REMOVING A BOLT THAT HAD BROKEN WITH A CHISEL AND HAD A PIECE OF STEEL THAT FLEW FROM THE BROKEN BOLT, EMBEDDED IN HIS LEFT ARM JUST ABOVE THE WRIST.

HE WAS HITTING RETURN IDLER TO GET THE CLAY OFF WHEN HE LOST GRIP OF THE HAMMER AND HIT HIS RIGHT HAND ON THE IDLER, INSTEAD.

A PIECE OF STEEL FROM THE SLASH HAMMER FLEW & EMBEDDED IN BETWEEN HIS INDEX FINGER & RING FINGER.