Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Was using a come along and gear stripped out hit hand on a piece of steel Fracturing finger.
Operator was repairing skid steer attachment. EE was swinging a sledge hammer, and EE heard something pop in EE's bicep area.
Co-worker was prying on a roller bearing, EE was standing behind and aside co-worker. The roller freed making contact with EE's teeth.
Employee was working in shop area cleaning up the remnants/shavings from working with Poly Pipe. While sweeping shavings from shop floor feet became tangled and tripped and fell onto the concrete floor.
Buildup of material was preventing the return roller from rolling. A support soldier block was in close proximity to the return roller. While using a pry bar to clear the buildup off of the soldier block, the pry bar came into contact with the moving conveyor causing the pry bar to impact the palm of the hand. The palm of the right hand received a 1" long x ½" wide laceration.
Employee was replacing the wear plate on the dredge pump. The wear plate was attached to a chain hoist. Employee stepped down grabbing the handrail. The wear plate swung, hitting employee's thumb that was holding onto the handrail.
A 2 1/4" 3/4 drive socket was being used to tighten down lid bolts on primary crusher. The socket was being used with a 3/4 drive air ratchet. Miner was using his right hand to hold socket in place and his left hand to separate impact. Socket had a piece of chrome sliver peeling off of socket. It was about 1 1/2 inches long. The sliver went into the miners right hand.
EE WAS CLEANING OUT A STOPPED UP CHUTE. HE WAS USING A FLAT BLADE MOUNTED ONTO A ROUND ROD. WHILE PUSHING OUT MATERIAL BUILD UP HE HIT HIS PINKY FINGER ON RIGHT HAND BETWEEN ROD & TOP OF CHUTE . HE CUT HIS FINGER REQUIRING 7 STITCHES TO CLOSE IT UP.
EMPLOYEE WAS HELPING TO INSTALL ROLLER ON CONVEYOR BELT. WHILE TRYING TO REMOVE THE BAD ROLLER HE WAS HOLDING WHILE ANOTHER EMPLOYEE WAS HITTING IT WITH A HAMMER. THE ROLLER TURNED AND THE HAM MER HIS HIS LEFT INDEX FINGER. THE FINGER NAIL WAS REMOVED AND TWO STITCHES PUT IN THE END OF THE FINGER.
EMPLOYEE WAS HELPING TO DISLODGE A PIECE OF STEEL HUNG IN JAW CRUSHER. THEY WAS USING A DRIFT PIN AND A SLEDGE HAMMER. INJURY EMPLOYEE WAS WATCHING ANOTHER EMPLOYEE HIT THE DRIFT PIN WITH HAMM ER WHEN A PIECE BROKE OFF & FLEW INTO CORNER OF LEFT EYE. THE PIECE WAS HOT & BURN EYE.
EMPLOYEE WAS HELPING TO PULL SLEEVE OFF OF AN ENGINE. THE SLEEVE PULLER FELL & HIT EMPLOYEE ON LEFT HAND CAUSING A LACERATION ON RING FINGER AT THE SECOND JOINT. 4 STITCHES.
EE WAS HELPING TO TIGHTEN BOLTS ON CRUSHER WHEN HE TURN AND PULL MUSCLE IN HIS BACK.
HE WAS PRYING THE DREDGE CUTTER CHAIN TRACK WITH A PRY BAR. THE BAR SLIPPED OFF THE CHAIN AND HE PINCHED HIS THUMB BETWEEN THE PRY BAR AND A PIPE.
THE EE WAS USING AN IRON PIPE TO PRY LOOSE A LARGE STONE THAT WAS LODGED IN THE PRIMARY CRUSHER. THE IRON PIPE SLIPPED OFF THE ROCK AND STRUCK THE EE ON RIGHT SIDE OF HEAD THE TEMPLE AREA CAUS ING A CONCUSION OF THE SKULL INFECTED INNER EAR INFLAMATION IN BACK THE EYE.
EMPLOYEES WERE REMOVING FACE PLATE FROM DREDGE PUMP WITH CABLE HOIST. THEY WERE ATTEMPTING TO LAY FACE PLATE ON DREDGE DECK. THEY FAILER TO REMOVE A PIECE OF BOX IRON CLAMPED ABOVE THE PUMP. A S THEY LOWERED THE FACE PLATE, THE CABLE CAME IN CONTACT WITH THE BOX IRON AND BROKE IT LOOSE, CAUSING IT TO STRIKE THE VICTIM IN THE NECK AND SHOULDER AREA.
REMOVING PIN FROM CUTTER HEAD PIN CAME FREE IT FELL ON FINGER SEVERING TIP
LACERATION TO RIGHT FOREARM. EMPLOYEE WAS OPERATING A HAND WINCH RAISING A PUMP SHELL. THE WINCH HANDLE SLIPPED OUT OF HIS HAND AND STRUCK HIS RIGHT FOREARM.
THE INJURED WAS HOLDING COUPLING AS ANOTHER EMPLOPYEE WAS HITTING IT WITH HAMMER TO REMOVE IT FROM SHAFT.HAMMER BOUNCED OFF SHAFT HITTING HIS FINGER.