Buscar en el registro

Employee reported that he was driving rebar into the ground with a sledge hammer when his swing missed causing the top of his right hand to come in contact with second piece of rebar. Injury resulted in 13 stitches.

Employee was nailing concrete forms together while in a kneeling position. When he stood up, he said he had a sharp pain in his lower back.

Employee was attempting to pry a metal beam into position, the beam dropped down catching his left thumb.

Was working on Ex-tec turbo mahcine and was in an odd position under screen, tightening bolts on screen.

Employee was lowering object into 12ft Classifier using chain hoist when ratchet handle flew back and struck his hand against piece of metal

Using a crowbar to turn the tailpulley over on the #2 belt, the crowbar broke loose smashing his right hand against the angle line.

Employee was using chain hoist when his hand became caught between handle and metal rail.

Was working on dust collector using a pry bar when it slipped causing his right thumb to be struck with the bar.

EMPLOYEE WAS USING A 2" X 6" OAK BOARD AS AN IMPACT TOOL WHEN THE SPLINTER FROM THE WOOD WAS IMPACTED INTO THE PALM OF THIS LEFT HAND.

EE WAS DRIVING A BEARING INTO A HOUSING WHEN A PIECE OF METAL OFF OF THE HAMMERHEAD LODGED IN HIS LEFT HAND. THE PIECE OF METAL WAS APPROX. 3 MM.

Ee was putting a belt on Crusher Sheave when the pry bar he was using to hold the Sheave back came loose. His right hand became caught under the belt injuring his four fingers on his right hand.

WHILE LOOSENING A TENSION SPRING BOLT ON THE 44 X 48 JAW CRUSHER, THE NUT BROKE LOOSE AND THE 12 INCH WRENCH SLIPPED OFF AND STRUCK EMPLOYEE IN MOUTH.

WHILE DISLODGING BUILD UP AT TRANSFER BOX USING PRYBAR PINCHED INDEX FINGER RH (CUTTING FINGER TIP) BETWEEN PRYBAR & ANGLE IRON STRUCTURE.

WHILE LAYING ON CONVEYOR BELT WITH CHEST AREA OVER HEAD PULLEY CLEARING ROCK BUILD UP, FELT PAIN IN LEFT SIDE OF RIB CAGE. FELT A SNAP & PAIN IN RIB CAGE WHERE FULL BODY WEIGHT RESTED ON CHEST WHERE IT CONTACTED HEAD PULLEY & BELT. CONVEYOR WAS SHUT DOWN & LOCKED OUT.

WHILE CLEANING OUT BENEATH A BIN USING A PRY BAR(6') WHEN LOOSE MATERIAL HIT BAR WHICH SWUNG THEBAR AROUND AND STRUCK EMPLOYEE ON RIGHT SIDE OF HEAD.

EE WAS HITTING DRILL STEEL WITH SLEDGE HAMMER. HE MISSED THE DRILL STEEL & HIS KNUCKLE WAS POSITIONED BETWEEN DRILL STEEL & HAMMER.

WHILE CONSTRUCTING CONVEYOR SYSTEM EE WAS USING A HAMMER AND CHSIEL. A SLIVER OF STEEL FLEW OFF CHISEL WHEN STRUCK BY HAMMER AND LODGED IN THE LITTLE FINGER RIGHT HAND.

AT APPROX 10:30 AM ON 2-18-99, EE WAS WORKING WITH ANOTHER INDIVIDUAL IN THE CONSTRUCTED OF SIDE SKIRTS FOR THE CONVEYORS. HE WAS USING A RAZOR BLAD UTILITY KNIFE CUTTING BELT STOCK TO SIDE WH EN HE OVER COMPENSATED STRIKING HIS LEFT LEG CALF REQUIRING 6 STITCHES.

STANDING ON TOP OF SECONDARY CRUSHER.

WHILE STRIKING THE UNDERSIDE OF THE SLIDE CHUTE ON THE SPC-2 CONVEYOR WITH A 3'LONG 25LB WRENCH PULLED MUSCLE IN BAC

WHILE CLEARING THE RIPRAP CHUTE AT THE JAW CRUSHER A CHUNK OF ROCK ABOUT THE SIZE OF A GRAPEFRUIT FELL THROUGH & STRUCK EE IN LOWER BACK.

CUTTING BEARING OFF HAMMERMILL SHAFT WITH CUTTING TOCH--TOOK HAMMER 7 TAPPED ON BEARING HOUSING & PIECE FLEW OPFF 7 HIT ON LEFT (RIGHT). HE REMAINED ON THE JOB FOR THE REST OF DAYS AFTER A VIS IT TO DR--REFERRED TO SURGEON. ALL OK.

WHILE ENLARGING HOLES IN CONVEYOR BELT WITH KNIFE, KNIFE SLIPPED & CUT LEFT HAND.

WHILE USING A LONG BAR TO CLEAN OUT MILL, APPARTENTLY STRAINED BACK ON 1-18-93. DIDNOT REPORT INCIDENT ON 2-25-93 WHILE USING LARGE HAMMER COMPLAINED OF CATCH IN BACK AND AT THAT TIME ADVISED FOREMAN OF 1-18-93 INCIDENT.

WHILE WELDING AND CHIPPING ON BUCKET OF 245 EXCAVATOR FOREIGN MATTER GOT INTO EYE.

WHILE USING HAND HOOK IN ATTEMPT TO FREE LARGE ROCK AT JAW CRUSHER HE PULLED A MUSCLE WHILE PULLING UP ON THE HOOK.THE HERNIA WAS DISCOVERED 03-19-92 WHILE EMPLOYEE WAS UNDERGOING DOT PHYSICAL .OPERATION TO CORRECT HERNIA CONDUCTED 05-11-92.

CLEANING GRIZZLY BARS OUT ROCK CHIP WENT INTO EMPLOYEE EYE.

HE WAS CLEANING OUT UNDER BIN USING A PICK AND LOST CONTROL OF PICK AND HIT HIS HAND ON A PIECE OF ANGLE ARM. IT CUT HIS RIGHT HAND INDEX FINGER NAIL OFF AND CUT UNDER HIS FINGER.

ROPE TIED TO DRILL AND PULLING ROPE DRILL UP

CUTTING CONVEYOR BELT & CUT LEFT HAND.

HE WAS TIGHTEN BOLTS ON CAGE MILL WHEELS, SOCKET SLIP OFF AND CRACK HAND. BROKE MIDDLE FINGER ON LEFT HAND.

HE WAS WORKING IN SHOP KNOCKING TIPS OFF HANGERS.HE HIT PIECE OF PIPE AND IT FLEW UP AND HIT HIM IN HEAD.

ROCKS IN FEEDER FELL ACROSS VICTIM'S RIGHT LEG WHILE HE WAS PRYING A WELDED ROCK FREE WITH A BAR.

EMPLOYEE USED A PRY BAR TO PUSH ROCK FROM HOPPER INTO CURSHER. THE BAR SLIPPED AND HE MASHED HIS HAND AGAINST THE SIDE OF THE FEEDER.

PUTTING SHIN IN CRSHER. HE CRAWLED UP UNDER CRUSHER TO TIGHTEN BOLT, HAD RIGHT LEG TWISTED ANDPUTTING SHIN IN CRUSHER. HE CRAWLED UP UNDER CRUSHER TO TIGHTEN BOLT, HAD RIGHT LEG TWISTED AN D PULLED ON CHAIN HOIST AND FELT KNEE POP. CAUSING DAMAGE TO RIGHT KNEE.