Buscar en el registro

EE was trying to pry a rock out of jaw unit and smashed EE's finger with pry bar and the rock.

EE was trimming conveyor belt using a utility knife. The belt cut easier than EE expected, resulting in the knife travelling past the conveyor belt and making contact with the EE's leg. The contact resulted in a laceration requiring sutures.

During Teardown of the loadout bunker one of the legs got hung up. They were using a pry bar to release the tension, the bar slid off the leg and it slid down on the pedestal. EE had put hand on the pedestal to move it as the bar slid off crushing EE's 4 fingers.

Employee was trying to remove a drill steel from a 988H loader bucker which was wedged in the bucket. He hit it with a hammer and it sprung out hitting him in the ankle. The doctor did an x-ray 11-12-2013 and gave him time off until follow up appt. on 11/18/13. At that time, the Dr returned ee to light duty with anther follow up appt in 10 days.

Miner was tightening a loose bolt. The ratchet slipped off the bolt causing the miner's right finger to be smashed.

EE was using a pry bar to put a screen in place. The bar slipped and cut his lip.

Employee was welding liner in the truck bed of 769 cat wagon. He was using a hydraulic porta-power to wedge metal in place to get metal tight to box when porta-power became unlodged and sprang up hitting his upper right lip dislocating a tooth.

EMPLOYEE WAS PREPARING A CONVEYOR BELT FOR SPLICING & WHILE CUTTING THE EDGE HE SLIPPED, CUTTING HIS LT. INDEX FINGER.

EE WAS CLEANING THE RETURN ROLLERS ON THE JAW UNDER CONVEYOR WITH A HAMMER

USING CHOP SAW TO CUT A PIECE OF KEY WAY STOCK. WHEN BROKE OFF KEY WAY, SHARP EDGE CAUGHT RIGHT PINKIE AND TORE OFF NAIL AND RIPPED END OF FINGER.

EE WAS USING A TORQUE MULTIPLIER TO TIGHTEN THE BLOW BARS WHEN IT FELL OFF THE HEAD OF THE BOLT AND HE TRIED TO CATCH IT BUT IT FELL ON HIS LEFT LITTLE FINGER.

EMPLOYEE WAS HOLDING A STEEL POST WHILE OTHER EMPLOYEE WAS DRIVING IT WITH A SLEDGE HAMMER. HAMMER MISSED POST AND STRUCK FINGER OF EMPLOYEE HOLDING POST.

EE WAS TRYING TO REMOVE A ROCK WEDGED BETWEEN BELT AND CONVEYER USING A SMALL PRY BAR. THE BAR LOST ITS BIT ON ROCK AND SLIPPED FROM HIS HANDS HITTING HIM IN THE CHIN. HAD SMALL CUT ON RIGHT C HIN NEEDING 4 STITCHES. RETURNED TO WORK TO FINISH THE DAY OUT.

EMPLOYEE WAS DRIVING A BONDING GROUND ROD INTO GROUND AND SMASHED LEFT THUMB WITH HAMMER.

EE WAS SHOVELING BY THE JAW UNDER CONV. & PULLEDA MUSCLE IN HIS R SIDE OF HIS BACK

ADJUSTING PRODUCT CONE ON ROCK CRUSHER USING OPY WEDGES & A 20LB SLEDGE HAMMER

WHILE REMOVING NOT ON BOLT WRENCH SLIPPED & MASHED THUMB

CUTTIGN SOME CROWN RUBBER WITH UTILITY KNIFE AND SLICED THROUGH INTO TOP OF THUMB.

MOVING A MOTOR, TRYING TO MOVE BY PRYING WITH PRY BAR. BAR SLIPPED & ELBOW STRUCK MOTOR.

DRY, WARM WEATHER. WRENCH SLIPPED OFF OF NUT STRIKING EMPLOYEE IN MOUTH LOOSENING A TOOTH.

EE WAS STANDING BY WHEN OTHER WAS HITTING A CUT BOLT. WHEN HE HIT THE CUT BOLT A PIECE OF THEIR HAMMER FLEW OFF AND HIT EE IN THE SIDE.

WHILE USING A SLEDGEHAMMER TO KNOCK OUT PINS ON TOGGLE BOLTS, THE HANDLE HIT THE BOLT, SMASHING MIDDLE FINGER OF THE RT HAND. 4 STITCHES REQUIRED TO CLOSE OPEN WOUND CAUSED BY IMPACT.

A JAM OF DEBRI IN THE OVERHEAD LOAD OUT BUNKER WAS HIT IN FACE TRY TO CLEAR THE JAM IN THE LOAD OUT CHUTE.

CO-WORKER SHOVELING NEXT TO EE HIT HIM IN THE NOSE WITH SHOVEL

HELPING PULL BEARING TOPPED WITH HAMMER A PIECE OF STEEL WENT IN EYE

INJURED WAS HELPING TO INSTALL THE REAR SUPPORT ON A 980-C WHILE HE WAS HOLDING IT THE MECHANIC PRYING IT OVER, AND IT FELL TO THE GROUND SMASHING HIS FINGER TO THE GROUND.

WHILE TALKING TO ANOTHER EMPLOYEE HE PICKED UP WHAT HE THOUGHT WAS A PEN OR HOLE PUNCH WHICH TURNED OUT TO BE A GUN AND IT WENT OFF IN HIS HAND.

EMPLOYEE WAS INSTALLING MAT ON SCREEN MAKING HOLES IN MAT WITH RAZOR KNIFE. KNIFE SLIPPED AND CUT LEFT FORE ARM.

EMPL ADJUSTING A 2" NUT ON THE END OF THE TOGGLE SPRING AND THE WRENCH SLIPPED OFF THE NUT AND FINGER WAS SMASHED AGAINST THE JAW HOUSING AND THE WRENCH.

I NAME WAS HIT ON THE NOSE WITH A PVC PINE HIS NOSE WAS BROKEN WHEN A SECTION OF PIPE SPRANG LOOSE FROM A CONVEYOR FRAME WHERE IT WAS CAUGHT & BENT IN TRYING TO FORCE THE BENT PIPE IT CAME LO OSE & HIT HIM BREAKING THE NOSE

EMPLOYEE WAS WORKING WITH A CABLE TYPE(COME-ALONG) PULLER ON A CONVEYOR 10 FEEL ABOVE THE GROUND - THE TOOL SLIPED AND HE LOST HIS BALANCE, FALLING TO THE ROCK FLOOR.

WHILE REMOVING CUTTING EDGE BOLTS HAND SLIPPED AND WAS CUT ON THE SHARP EDGE OF BOLT.

I NAME WAS USING A PICK(HAND HELD) TO BREAK LOSE BUILDUP MATERIAL UNDER A STACKING BELT WHEN HE FELT A POP IN THE SMALL OF HIS BACK

HAD ROCK LOADGED IN JAW CRUSHER AND WAS USING WEDGE TO DISLODGE ROCK WHEN CHIP FLEW OFF OF WEDGE AND LODGED IN WORKER CHEEK.

EMPLOYEE WAS TIGHTENING FUEL INJECTOR LINE ON DIESEL WELDER, WRENCH SLIPPED & HAND WENT INTO RADIATOR FAN.