Mining Incidents

Buscar en el registro

Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.

Incidentes totales
273,193
De los cuales mortales
1,202
Años en el registro
2000–2026
Clasificaciones
20
Filtros 2 activos
Período
Experiencia al momento del incidente

Notifícame sobre esta búsqueda

Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.

El registro

10 registros coincidentes

Mostrando los 10
19 de octubre de 2022 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Sobreesfuerzo al manejar o lanzar objetos

EE thinks lower back pain is due to EE swinging a 20# sledgehammer driving a pin out of an outrigger on a forklift. EE thinks the torque of the swings resulted in a tightness in lower back that became painful a few days later.

8 de junio de 2017 IN · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Sobreesfuerzo, no clasificado en otra parte

Employee was using a pry bar to help open a barn door dump bed and when door opened employee leaned forward straining lower back muscles. Stiff/sore lower back & right hip.

26 de mayo de 2011 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Golpeado por... no clasificado en otra parte

EE was cutting a hole in belting when the knife went through the belting while being drawn over the belting and cut the EE's right thigh.

11 de junio de 2010 IN · Metal/No metálico Operario de banco, Cantero HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Golpeado por... no clasificado en otra parte

Employee was cutting an old splice from a belt and when the knife went through the end of the belt the blade turned (due to a sag in the belt) cutting the employee's thumb.

25 de septiembre de 2009 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Atrapado en, bajo o entre, no clasificado en otra parte

EE was placing a roll of belting (to be used on a conveyor) onto the fork lift and when he removed his pry bar it pinched his finger. (Pry bar did the pinching). The fork lift was not in motion, cut caused by the pry bar.

15 de septiembre de 2007 IN · Metal/No metálico Capataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de horno HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Golpeado por... no clasificado en otra parte

Employee was in a jaw crushers hammering a piece of steel to flatten it out when he missed and struck the side his foot. fractured the most distal phalanpe of his r. pinky toe.

21 de enero de 2006 IN · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Golpeado por... no clasificado en otra parte

EE was cutting a piece of rubber V-flashing to fit beneath a screen when he cut the tip of his index finger.

24 de febrero de 2005 IN · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

A U-belt had jumped a pulley and EE was pulling on the belt while another employee was prying the belt over to the next pulley when the shaft went over center catching EE's hand between the belt and the pulley.

12 de octubre de 2002 IN · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating, Inc. · Golpeado por... no clasificado en otra parte

EMPLOYEE WAS CUTTING A PIECE OF BELT TO MAKE A FLASHING, WHEN THE KNIFE SLIPPED CAUSING A PUNCTURE WOUND IN HIS LEFT THUMB. (PALMER SURFACE)

17 de noviembre de 2001 IN · Metal/No metálico Soldador (de taller) HERRAMIENTAS MANUALES (SIN MOTOR)
S & G Excavating Inc · Sobreesfuerzo al jalar o empujar objetos

EE WAS LOOSENING A PIPE WITH A PIPE WRENCH WHEN HE FELT A POP IN HIS RIGHT SHOULDER. HE DIDN'T THINK HE WAS REALLY HURT SO DID NOT REPORT THE INCIDENT TO THE OFFICE. HE SAID IT WORSENED TIL HE WENT TO THE DR. WHO TOLD HIM HE HAD DAMAGED HIS ROTATOR CUFF. HE REPORTED THE ACCIDENT ON 12-12-01.

Mostrando los 10