Buscar en el registro

On 8/27/12 the employee was cut on his elbow when the nut he was trying to loosen broke free & his arm hit the frame of a machine. He received 1st aid & returned to work. On 8/28/12, while using a wrench to turn a thread-tapper & compensating for the pain in his elbow, the wrench slipped, glanced off his safety glasses & struck him in the forehead, causing another laceration.

Two employees were shoveling trash into the back of a garbage truck. One employee lifted his shovel as the other was leaning down and struck him in the forehead with the shovel.

Employee was chipping slag off of a weld. A piece flew up under his safety glasses and lodged in his eye.

The employee was using a hammer to dislodge a rock from a grate. A rock fragment broke off and stuck into his hand between his index and middle finger.

Employee was using a bar to lift a feeder into place. He strained too hard and injured his groin.

Employee was attaching a chain to a piece of equipment, preparing to move it. He pinched his thumb between a pulley and the lifting chain.

While using a utility knife to cut rubber conveyor belt, the knife slipped out of a groove in the rubber causing a laceration to the employee's left thumb. The wound required three stitches, x-ray and tetanus shot.

EMPLOYEE WAS SWINING A 10-16 LB SLEDGEHAMMER IN A BENT OVER POSITION WHILE HELPING TO CHANGE A BEARING ON THE WASH PLANT.

EE WAS UNPLUGGING JAW ON DREDGE. WHILE BARRING THE ROCK LOOSE, BAR SLIPPED AGAINST PITMAN CAUSING END OF BAR TO HIT HIM NEST TO HIS RIGHT EYE.

EMPLOYEE WAS HELPING WITH CUTTING CUTTING EDGE OFF LOADER. ANOTHER EMPLOYEE WAS BURNING THE EDGEOFF AND AS HE HAMMERED IT OFF, THE EDGE HIT THE EMPLOYEES TOE. Y

EE WAS TIGHTENING A BOLT ON STEADMAN CRUSHER.

EMPLOYEE WAS WORKING ON 780 HOE-WRENCH SLIPPED-CUTTING LEFT THUMB.

EE WAS CHANGE A GEAR REDUCER ON PLANT CONVEYOR. HE WAS USING A CHISEL AND A PIECE OF CHISEL BROKE OFF AND EMBEDDED IN HIS STOMACH AREA.

EMPLOYEE WAS WORKING ON PLANT STANDING 4 FEET OFF THE GROUND ON A LADDER AND A BEAM. HE WAS CUTTING H-BEAM. THE BEAM LET LOOSE AND KNOCKED HIM TO THE GROUND.

EMPLOYEE WAS WORKING ON BAERINGER CRUSHER AND THREW OUT LEFT HIP.

JACK FELL ON EE'S RT MIDDLE FINGER.

EE WAS REMOVING HOUSING OF PLVO-MATIC CRUSHER WHILE PERFORMING MAINTENANCE. WHEN HE REMOVED HE LAST BOLT THHE HOUSING TIPPED AND PINCHED OFF THE END OF HIS LEFT FINGER.

WHILE USING CHAIN FELL CHAIN FELL INJURING MIDDLE FINGER IN RIGHT HAND X-RAYS SHOW BROKEN FINGER & DETACHED TENDON

EMPLOYEE WAS CUTTING PIECE OF WOOD. PIECE OF WOOD CAME UP AND HIT EMPLOYEE IN RIGHT EYE.

EMPLOYEE WAS LIFTING SHAFT AND FLY WHEEL INTO PLACE CHAIN SLIPPED CAUSING SHAFT AND FLY WHEEL TO CRUSH EMPLOYEE'S TIGHT FOOT.

EMPLOYEE WAS DISASSEMBLING A HYDRAULIC CYLINDER AND WORKING NEAR ANOTHER EMPLOYEE WHO WAS HAMMERING ON A STEEL TRUCK FRAM. THE NOIS OF THE HAMMERING APPARENTLY CAUSED NERVE DAMAGE TO THE FIRST EMPLOYEE'S RIGHT EAR.

54736YEE CAUGHT LITTLE FINGER LEFT HAND IN COMEALONG IN THE RELEASE MODE REQUIRED 4 STITCHES

39783ENING BOLT ON BUCKET ON LOADER WRENCH SLIPPED INJ HAND THUMB AND FOREFINGER

WHILE TIGHTENING BOLT ON GRAVEL PLANT WRENCH SLIPPED HITTING EMPLOYEE ABOVE RIGHT EYE - REQUIRED STITCHES

EMPLOYEE WAS TIGHTENING TAPER LOCK ON WINCH GEAR ON DREDGE GEAR SPUN ALLEN WRENCH TORE PALM OF LEFT HAND

EMPLOYEE WAS SCRAPING WINDSHIELD ON LOADER. GOT PAINS IN HIS BACK.

USING KNIFE TO REPAIR HOSE SLICED R INDEX FINGER

CHAIN FALL HIT EMP IN EYE

EMPLOYEE WAS US3NG CROWBAR TO UNPLUG CONVEYOR BRUISED AND FRACTURED RT ARM AND LACERATIONS ON BRIDGE OF NOSE

WHILE CUTTING P2WER CABLE, KNIFE SLIPPED 1 INCH LACERATION TO LEFT INDEX FINGER AND BRUISED TENSON.

WAS HAMMERING ON CRUSHER PIECE OF HAMMER FLEW OFF AND INBEDDED IN FINGER INDEX FINGER RIGHT HAND.