Buscar en el registro

Employee was changing a tool bar on a D9N dozer and hurt his right shoulder; told his supervisor his arm hurt, not that it was from the job. Never stating anything else, he then went to the doctor on 4/21/04. This is when he states it wasn't getting any better. Safety department received the paperwork from the job site on 4/29/04 to file this MSHA report.

EE STATES WHILE USING A SLEDGE HAMMER TO BREAK ROCKS HE PULLED SHOULDER.

WHILE ATTEMPTING TO ROTATE A MOTOR SHAFT WITH A PIPE WRENCH. THE SHAFT FREE WHEELED, CATCHING HIS HAND BETWEEN THE WRENCH AND HOPPE FRAME. LACERATION RT. INDEX FINGER REQUIRING TWO STITCHES.

WHILE INSTALLING A NEW GEAR BOX EE WAS HAMMERING WHILE A CHIVE 2 FT ABOVE HIM ON THE FRAME. HIS LEFT ARM WAS ON TOP OF THE GEAR BOX WHILE HE WAS TIGHTENING THE BOLTS WITH HIS RIGHT HAND. CHIVE FELL ON LEFT WRIST.

EE STATES WHILE SHOVELING UNDER VSI HE PULLED MUSCLES

WHILE CUTTING BELTING THE UTILITY KNIFE SLIPPED AND CUT EMPLOYEE'S LEFT HAND NEAR THE THUMB.

EMPLOYEE WAS CLEANING OUT A CHUTE AND THE PLANT OPERATOR WAS TIGHTENING BOLTS ON THE GRIZZLY. THE OPERATOR'S LEVERAGE DEVICE SLIPPED AND FELL ONTO THE EMPLOYEE'S RIGHT ANKLE. THE EMPLOYEE WAS CLEANING OUT A CHUTE UNDER OTHER WORKERS ABOVE HIM

REMOVING MATERIAL FROM KILNS. MATERIAL FELL DOWN STRIKING THE METAL BAR. CAUSE BAR TO HIT EE AT THE SIDE OF FACE. BREAKING CHEEK BONE AROUND THE LEFT EYE.

EE WAS CUTTING A PIECE OF RUBBER WITH A UTILITY KNIFE AND SLIPPED CUTTING THROUGH TO THE LEFT PALM OF HIS LEFT HAND.

REMOVING MATERIAL THAT HAD STUCK ON THE INSIDE OF THE BURNER SHELL. EE REMOVED A PIECE OF MATERIAL WHICH CAUSED ANOTHER PIECE OF MATERIAL TO FALL STRIKING THE EE AND KNOCKING HIM TO THE GROUND . PATIENT COMPLETED SHIFT. VISITED DR ON 2/14/99. CONTUSION TO LOWER BACK. MUSCLE RELAXANT MEDICATION WAS PRESCRIBED.

STRIPPING ELECTRICAL WIRE WITH A POCKET KNIFE. KNIFE SLIPPED CUTTING EE'S RT THUMB.

REMOVING OVERSIZED MATERIAL FROM KILN WITH METAL BAR. BAR SLIPPED, CAUSING EE TO FALL ON BACK.

REMOVING MATERIAL FROM KILNS. MATERIAL FELL FROM KILN STRIKING METAL BAR CAUSING BAR TO HIT EE. LACERATION INSIDE LEFT CHEEK, CONTUSION AND MUSCLE TEAR OF LEFT SHOULDER.

CLEANING MATERIAL FROM EQUIPMENT WITH METAL BAR AND HOE. THE TWISTING AND TURNING APPARENTLY AGGREVATED A PRIOR BACK INJURY.

REPAIRING A TRACK ON A TRACK DRILL. AS HE WAS USING A 16# HAMMER TO POUND IN THE TRACK PIN, PROJECTILE SLIVER OF METAL FROM THE ACTIVITY LODGED INTO THE EE'S EYE. EE WAS NOT WEARING PROVIDED E YE PROTECTION.

TIGHTENNG BOLTS ON EQUIPMENT. PULLED ON WRENCH AND STRAINED BACK.

EMPLOYEE WAS REMOVING MATERIAL FROM KILNS WITH METAL BAR. MATERIAL HIT END OF BAR CAUSING IT TO STRIKE HIM IN THE FOREHEAD.

EMPLOYEE STATES THAT WHILE PRYING ON SCREEN DECK AND INSTALLING NEW SCREENS, THE PRY BAR SLIPPED AND HIT HIM IN THE JAW.

EMPLOYEE WAS IN THE PROCESS OF SHOVELING ACCUMULATED MATERIAL FROM BEHIND THE SCREEN PLANT AND AROCK FELL FROM THE TOP OF THE SCREEN ABOVE HIM AND STRUCK HIM IN THE ARM.

WHILE THE EMPLOYEE WAS SHOVELING FROM UNDER A CONVEYOR BELT, HE STRUCK HIS FINGER AGAINST THE STRUCTURE CUTTING HIS FINGER.

STATES THAT WHEN HE WAS BREAKING LOOSE THE FEED TUBE ON TOP OF A V.S.I. THE LID SLIPPED AND FELL ON TOP OF HIS FEET.

BENT OVER SHOVELING OR SOMETHING (HE IS NOT SURE) HE STOOD UP AND HIT HIS HEAD.

WORKING ON PLANT REPAIRS. WRENCH SLIPPED OFF BOLT CAUSING LASCERATION TO RIGHT RING FINGER.

REMOVING 48 INCH PIPE WRENCH FROM WORK AREA WHEN IT FELL ON LEFT LITTLE FINGER LAST KNUCKLE.

INSTALLING HYD PUMP-PUMP SLIPPED FROM CHAIN CUT RIGHT LITTLE FINGER.

EMPLOYEE WAS TIGHTENING BOLTS WITH WRENCH.WRENCH SLIPPED OFF BOLT CAUSING EMPLOYEE TO FALL FROM CATWALK ONTO THE GROUND.FALL WAS ABOUT 10 FEET.

STRAIGHTNING CHUTE WITH SLEDGE HAMMER

EMPLOYEE WAS ATTEMPTING TO REMOVE MATERIAL FROM KILNS A LARGE PIECE OF MTERIAL HIT THE BAR CAUSING IT TO STRIKE EMPLOYEE IN THE FACE

HE WAS PRYING A ROCK OUT OF THE FEEDER JAWS WHEN HE PUSHED TO HARD ON THE PRY BAR STRAINING THE STOMACH AREA.

EMPLOYEE WAS PUSHING "LOGS" INTO COOLER WITH A METAL BAR. ANOTHER "LOG" HIT THE BAR CAUSING IT TO STRIKE THE EMPLOYEE IN THE FACE. EMPLOYEE HAD 2 BROKEN TEETH AND LACERATIONS ON THE LIP.

EMPLOYEE WAS REMOVING OVERSIZED MATERIAL FROM KILN WITH METAL HOOK THE HOOK SLIPPED CAUSING EMPLOYEE TO FALL AND STRIKE HIS SHOULDER

EMPLOYEE WAS RE4OVING "LOGGED" MATERIAL FROM KILN WITH METAL HOOK. MATERIAL FELL ON THE HOOK CAUSING IT TO STRIKE EMPLOYEE IN THE JAW.

EMPLOYEE WAS PU8HING MATERIAL FROM KILN INTO COOLERS THE BAR HE WAS USING SLIPPED OFF MATERIAL AND STRUCK HIM IN THE HEAD.

REMOVING MUD FROM A HAMMERMILL WHEN A PIECE OF METAL CHIPPED OFF AND FLEW INTO LEFT EYE