Buscar en el registro

Crossing over drill, slipped, caught self with right arm (pulling shoulder)

Slipped off equipment in the rain.

EMPLOYEE WAS LOWERING THE LINER INTO THE CHUTE WITH THE CRANE, THE LINER WAS A LITTLE TOO WIDE, EMPLOYEE STOPPED THE CRANE OPERATOR & WAS TRIMMING THE LINER. THE LINER SLIPPED DOWN THE CHUTE & THE UPPER END CAME UP PINNING THE EMPLOYEE.

Employee was changing a tool bar on a D9N dozer and hurt his right shoulder; told his supervisor his arm hurt, not that it was from the job. Never stating anything else, he then went to the doctor on 4/21/04. This is when he states it wasn't getting any better. Safety department received the paperwork from the job site on 4/29/04 to file this MSHA report.

EE STATES HE WAS CLIMBING DOWN FROM BAG HOUSE WHEN HE SLIPPED LANDING ON KNEE DUE TO WATER ON LADDER.

EE STATES WHILE USING A SLEDGE HAMMER TO BREAK ROCKS HE PULLED SHOULDER.

EE CUT HIS RIGHT WRIST ON A SAFETY CHAIN.

EE STRADDLED ANGLE ON CONVEYOR WHERE A STUB OF WELDING ROD CUT THROUGH COVERALLS AND PANTS OF CUTTING RT. LEG ABOVE KNEE.

WHILE ATTEMPTING TO ROTATE A MOTOR SHAFT WITH A PIPE WRENCH. THE SHAFT FREE WHEELED, CATCHING HIS HAND BETWEEN THE WRENCH AND HOPPE FRAME. LACERATION RT. INDEX FINGER REQUIRING TWO STITCHES.

EE WAS DISMOUNTING FROM CRAN3 WHEN HE SLIPPED APPROX 3', FALLING AND FRACTURING LEFT RIB.

EMPLOYEE STATES THAT HE WENT TO STAND UP, AFTER WALKING UNDER CONVEYER HE STOOD UP TOO SOON AND HIT HIS HEAD ON THE CONVEYER, HE WAS WEARING HISHARD HAT.

EMPLOYEE STATES THAT WHILE WORKING ON SCREEN UP WITH 17" IMPACT WRENCH 3/4" WOBBLE SOCKET 1/2" NUT. THE SOCKET SLIPPED OFF NUT, HITTING HIS R. EYE CAUSING ABRASION TO EYE.

WHILE INSTALLING A NEW GEAR BOX EE WAS HAMMERING WHILE A CHIVE 2 FT ABOVE HIM ON THE FRAME. HIS LEFT ARM WAS ON TOP OF THE GEAR BOX WHILE HE WAS TIGHTENING THE BOLTS WITH HIS RIGHT HAND. CHIVE FELL ON LEFT WRIST.

WHILE CHECKING K2001 TRACKING, THE EE STOOD ON THE SW SIDE OF THE BELT. HE REACHED WITH HIS LEFT HAND IN BETWEEN TWO ROLLERS TO GET A ROCK WHILE THE BELT WAS RUNNING CAUSING L ARM TO FRACTURE.

EE STATES WHILE SHOVELING UNDER VSI HE PULLED MUSCLES

EMPLOYEE STATES THAT WHILE ROLLING A BIG ROCK, HE SLIPPED IN SAND, STRAINING HIS BACK.

EMPLOYEE WAS GRINDING OUT DENTS IN A HOOD OF A TRUCK WHEN THE GRINDING WHEEL CAME LOOSE AND HITHIS LEG CAUSING A CUT WITH PIECES OF THE DISC EMBEDDED IN HIS LEG.

WHILE CUTTING BELTING THE UTILITY KNIFE SLIPPED AND CUT EMPLOYEE'S LEFT HAND NEAR THE THUMB.

EE STATES HE WAS CLIMBING ON A STOPPED BELT TO REACH A GREASE FITTING AND CUT HIS LEFT LEG BELOW THE KNEE.

EE PICKED UP RAILROAD TIES TO SET ON FORKLIFT WHEN ONE SLIPPED AND SMASHED HIS FINGER.

EE STATES HE WAS CLIMBING DOWN FROM A LOADER AND SLIPPED JAMMING HIS LEFT KNEE.

THE EE WAS STANDING ON THE SCREEN WHILE THEY WERE LIFTING A CROSS OVER CONVEYOR BELT. HE PUT HISFOOT ON THE CONVEYOR TO TIGHTEN THE COMEALONG AND THE SUPPORT BRACKET WELD BROKE. THE CONVEYOR SWUNG OUT & HE LOST HIS BALANCE & FELL. HE LAND ED ON HIS RIGHT SIDE ON THE SUPPORT BRACKET. HE FELL APPROX 13 FT

EMPLOYEE WAS CLEANING OUT A CHUTE AND THE PLANT OPERATOR WAS TIGHTENING BOLTS ON THE GRIZZLY. THE OPERATOR'S LEVERAGE DEVICE SLIPPED AND FELL ONTO THE EMPLOYEE'S RIGHT ANKLE. THE EMPLOYEE WAS CLEANING OUT A CHUTE UNDER OTHER WORKERS ABOVE HIM

WALKING ON CATWALK AND TWISTED ANKLE.

REMOVING MATERIAL FROM KILNS. MATERIAL FELL DOWN STRIKING THE METAL BAR. CAUSE BAR TO HIT EE AT THE SIDE OF FACE. BREAKING CHEEK BONE AROUND THE LEFT EYE.

CLEANING DRAG CHAIN IN HOPPER. THE MACHINE WAS NOT TURNED OFF. THE CHAIN CAUGHT EE'S GLOVE PULLING HIS HADN UNDER CHAIN.

CLEANING SKID STEER LOADER. EMPLOYEE WAS BETWEENBUCKET AND LOADER FRAME. ANOTHER EMPLOYEE REACHED INTO LOADER AND ACCIDENTLY MOVED LEVER CAUSING THE BUCKET TO PINCH EMPLOYEE'S LOWER LEG. X RAY TAKEN NEGATIVE FRACTURE. PRESCRIPTION GIVEN FOR PAIN. RESTRICTED DUTY FOR 3 DAYS.

EMPLOYEE STATES THAT WHILE WORKING ON A SCREEN TAIL PULLEY HE STRAINED HIMSELF.

EE WAS HELPING AT THE CONE CRUSHER AND SLIPPED. HE HIT HIS RIGHT SIDE ON A STUD AND FELT PAIN IN HIS RIB CAGE.

EE WAS CUTTING A PIECE OF RUBBER WITH A UTILITY KNIFE AND SLIPPED CUTTING THROUGH TO THE LEFT PALM OF HIS LEFT HAND.

THE EMPLOYEE WAS MEASURING THE BELT. HE SLIPPED WHILE CLIMBING OFF AND FELL APPROX 3'. HE SPRAINED HIS RIGHT ANKLE.

EE STATES WHILE TAKING A SHOWER HE NOTCIED A LUMP IN GROIN AREA. UNKNOWN IF JOB RELATED. UNDER INVESTIGATION.

REMOVING MATERIAL THAT HAD STUCK ON THE INSIDE OF THE BURNER SHELL. EE REMOVED A PIECE OF MATERIAL WHICH CAUSED ANOTHER PIECE OF MATERIAL TO FALL STRIKING THE EE AND KNOCKING HIM TO THE GROUND . PATIENT COMPLETED SHIFT. VISITED DR ON 2/14/99. CONTUSION TO LOWER BACK. MUSCLE RELAXANT MEDICATION WAS PRESCRIBED.

WHILE HE WAS SHOVELING UNDER A CONVEYOR BELT HE TWISTED HIS TORSO STRAINING HIS LOWER BACK.

EMPLOYEE CLAIMS THAT HE HAD PAIN IN HIS RIGHT AND LEFT WRIST AFTER WORK ON 10/12/98. HE DID NOT REPORT THIS INJURY UNTIL 10/23/98. THE DOCTOR DIAGNOSED HIM WITH BILATERAL CARPAL TUNNEL SYNDROM E, WHICH IS A PRE-EXISTING CONDITION. THE EMPLOYEE CLAIMS THE INJURY WAS CAUSED BY SHOVELING ANDCLEANING AROUND THE CONVEYOR BELTS. SEE ATTACHMENT.

STRIPPING ELECTRICAL WIRE WITH A POCKET KNIFE. KNIFE SLIPPED CUTTING EE'S RT THUMB.

EE LOOKED AT WELDING ARC WHILE ANOTHER EE WAS WELDING.

LIGHTINGBURNER PIPE. EXCESS GAS IGNITED CAUSING FLASHBACK WHICH CAUSED FIRST DEGREE BURN TO FACE.

EE STATED THAT WHILE LIFTING AND MOVING SOME METAL STRIPS HE STRAINED HIS BACK.

EE WAS CARRING A PIECE OF SHARP STEEL AND CUT HIS LEFT LITTLE FINGER.

EE STATES THAT WHILE HE WAS CLEANING THE VSI CRUSHER WHICH WAS OUT OF SERVICE FOR A MOTOR RADIOATOR REPLACEMENT AND WHEN THE RADIATOR WAS REPLACED THE MECHANIC JOGGED THE MOTOR AND THE EE CLEA NING THE CRUHSER WAS STRUCK BY THE ROTATING TABLE.

EE WAS IN PROCESS OF CHANGING THE BLOW BARS IN THE IMPACTOR AND THE ROTOR AND BLOW BARS ON ONE SIDE HUNG UP AGAINST THE WALL. A CRANE WAS HOOKED UP TO HELP TURN THE ROTOR AND APARENNTLY WHILE THE CRANE WAS LIFTING AND PRY BAR WAS BEING USEDHIS FOOT SLIPPED DOWN INSIDE AS THE ROTOR TURNED AND IT CAUGHT HIS RIGHT FOOT.

EE STATES THAT HE WAS ADJUSTING AN IMPACTOR SETTING AND HIS HAND GOT CAUGHT BETWEEN THE WALL AND THE ROTOR

EXACT TIME OF INJUR UNKNOWN. PATIENT HAD DISCOMFORT IN RIGHT EYE AND WENT TO DR. EXAM REVEALED METAL SLIVER IN EYE.

EMPL9OYEE STATS THAT HE DOESN'T KNOW WHEN HE WAS INJURED, BUT IT MAY HAVE OCCURED WHEN HE JUMPED OFF FROM A LADDER. HIS ALLEGED INJURY IS UNDER INVESTIGATION BY THE STATE IDUSTIRAL INSURANCE SYSTEM.

EMPLOYEE WAS INSTALLING RUBBER BELT ON CONVEYOR. AS EMPLLOYEE WAS PULLING BELT, IT CAUGHT CAUSING EMPLOYEE TO EXTEND ARM INJURING SHOULDER.

REMOVING OVERSIZED MATERIAL FROM KILN WITH METAL BAR. BAR SLIPPED, CAUSING EE TO FALL ON BACK.

REMOVING MATERIAL FROM KILNS. MATERIAL FELL FROM KILN STRIKING METAL BAR CAUSING BAR TO HIT EE. LACERATION INSIDE LEFT CHEEK, CONTUSION AND MUSCLE TEAR OF LEFT SHOULDER.

WALKING DOWNSTAIRS. SLIPPED AND TRYED TO CATCH SELF FROM FALLING BY GRABBING HANDRAIL. INJURED MUSCLES IN ARM AND CHEST WHEN GRABBING HANDRAIL

CLEANING MATERIAL FROM EQUIPMENT WITH METAL BAR AND HOE. THE TWISTING AND TURNING APPARENTLY AGGREVATED A PRIOR BACK INJURY.