Buscar en el registro

A piece of chisel that employee was using broke off and embedded in their thigh.

The employee was using a rock hammer to strike a wedge when the hammer rebounded and struck them in the forehead.

EE was removing a metal panel from the side of a machine for maintenance. EE had EE's hand on the bottom of the panel when EE removed the top bolt. The panel slipped, pinching EE's fingers between the panel and the table.

The employee was using a crowbar to move a rock when it broke on a natural seam in the stone and struck EE on the right arm.

Employee was using splitting maul to split rock. The tip chipped off striking employee on the right side of chest by the collar bone.

Employee was in the splitting bay using a trimming hammer and a small piece of stone flew off and wedged under employee's skin.

Employee was chiseling cap of rock when a piece of the chisel head broke and went into EE's left bicep.

Piece of metal off a splitting trimmer went through his glove and stuck in his index nail.

The employee came in to work on May 28th, 2014 and stated that he had a sore back from splitting stone.

Employee was splitting stone. As the hammer struck the stone he rolled his wrist, re-injuring a pre-existing condition.

He was trying to pry a stone apart with a pry bar and it hit him in the head.

He was using a chisel to trim stone and a piece of the chisel flew off into his wrist. He had no pain when it happened so he didn't report it right away. It started hurting on 8/9/11 and he reported it then.

He was trimming a piece of rock when a small chip of steel from the hammer hit him in the right side of the neck causing a puncture wound.

Employee was splitting stone, using a 16lb stone splitting hammer, when a piece of steel chipped off the hammer head and struck him in the arm. The small pc of steel punctured his arm and has to be removed.

Employee works splitting stone with a mason hammer. While trimming stone a piece of steel flew off hammer and penetrated his face.

EMPLOYEE WAS SPLITTING MATERIAL USING A 6 LB HAMMER WHEN HE HIT THE CORNER OF THE HAMMER ON THE STONE CAUSING A SMALL PIECE OF STEEL TO FLY OFF HAMMER. THE SMALL PIECE OF STEEL ENDED UP EMBEDD ED IN THE SKIN OF THE CHEST AREA.

EMPLOYEE WAS SPLITTING STONE WITH A 6 POUND TRIMMER WHEN HE HIT HIS LEFT THUMB ON MISTAKE. EE SUFFERED A FRACTURE ON THE TIP OF LEFT THUMB.

EE WAS USING A PRY BAR TO SEPARATE DRILLED SLABS WHEN HE SLIPPED OUT OF THE DRILL HOLE & FELL DOWN HITTING HIS LOWER BACK. EE SUFFERED A BACK SPRAIN & BRUISING.

EMPLOYEE WAS SWINGING A 16 LB HAMMER ATTEMPTING TO SPLIT A PIECE OF STONE WHEN THE HAMMER BOUNCED OFF THE STONE AND HIT THE EMPLOYEE'S RIGHT ANKLE.

WHILE SPLITTING A PIECE OF STONE WITH A TRIMMING HAMMER AND A CHISEL THE TRIMMING HAMMER SLIPPED OFF THE CHISEL AND EE HIT HIS LEFT THUMB.

THE EMPLOYEE WAS USING A TRIMMER/HAMMER TO STRAIGHTEN A PIECE OF STEEL FROM THE GUILLITINE AND HIT HIS FINGER WITH THE FLAT END OF THE TRIMMER.

THE EE WAS SPLITTING STONE WITH A HAMMER. WHILE WING THE HAMMER THE HEAD OF THE HAMMER CAME OFF AND PULLED HIS SHOULDER OUT AND THE HAMMER HEAD HIT HIM IN THE LEG.

EE WAS SPLITTING A STONE WITH A HAMMER AND TURNED HIS HEAD TO LOOK AT ANOTHER EE AND KINKED HIS NECK.

EE WAS USING A CROWBAR TO PRY APART A STONE HE HAD SPLIT. A SMALL CHUNK OF STONE FELL AND STRUCK HIS FOOT ABOVE THE STEEL TOE.

THERE WAS NO ACTUAL ACCIDENT. EE WAS SPLITTING STONE BY HAND USING A 616. AND OR 16 LB. HAMMER HIS FIRST DAY OF WORK HAS 3-9-98 AND AT 12:30 PM THE NEXT COMPLAINED HIS RIGHT WRIST HURT.

EE WAS NOT FOLLOWING STANDARD PROCEDURE OR REPAIR PRACTICES WHEN REMOVING A RIM FROM A LOADER TIRE HE HIT HIMSELF WITH THE 12 LB HAMMER HE WAS USING.

WHILE ANOTHER EE WAS SPLITTING STONE WITH A 16 LB SPLITTING HAMMER, NEXT TO EE, A PIECE OF STONE FLEW OFF AND HIT EE CAUSING A CUT OT HIS LEFT WRIST.

WHILE SEPARATING TWO PIECES OF STONE WITH A BAR, ONE PIECE FELL STRIKING TOP SIDE OF RIGHT FOOT

SPLITTING STONE CAUSED A PAIN IN HIS RIGHT HAND.

WHILE SPLITTING STONE A STONE FELL AND HIT HIS LEFT ANKLE.

WHILE SPLITTING STONE A PIECE OF STONE FROM ANOTHER SPLITTER HIT HIM IN THE FOREARM.

EMPLOYEE CLAIMS FOREARMS HUT FROM SPLITTING STONE WITH A TRIMMING HAMMER.

WHILE SPLITTING STONE EE PINCHED FINGER BETWEEN TWO STONES.

WHILE SPLITTING STONE; A STONE FELL OFF THE PILEAND INJURED HIS RIGHT HAND.

WHILE SPLITTING STONE THE EE PINCHED HIS LEFT THUMB BETWEEN TWO STONES.

WHILE SPITITNG STONE A STONE ROLLED OFF A SMALL PILE OF STONE STRIKING THE EMPLOYEE ON THE ANKLE.

WHILE TRIMMING A STONE, THE STONE SHIFTED AND CAUSED THE EE TO PINCH HIS RIGHT INDEX FINGER BETWEEN TWO STONES.

WHILE SPLITTING STONE WITH A HAMMER HE HI HIS RIGHT INDEX FINGER.

WHILE TRIMMING STONE RIGHT WRIST IS PAINFUL.

WHILE TIGHTENING BOLTS ON EXCAVATOR HE SLIPPED AND HIT THE TRACK ON THE MACHINE INJURING HIS SHOULDER.

STRIKING STONE WITH HAMMER,THE HAMMER TWISTED TWISTING ARM.

WHILE SPLITTING STONE A PIECE OF STEEL FLEW OFF HAMMER AND WENT INTO RIGHT KNEE.

WHILE LOOSENING BOLT ON AXLE OF LOADER,THE BOLT LOOSENED AND THE EMPLOYEE FELL BACK AND STRUCK THE BACK OF HIS NECK ON A HYDRAULIC CYCLINDER.

WHILE SPLITTING3STONE HE HAMMERED HIS LEFT RING FINGER

WHILE TRYING TO3REMOVE HAMMER HEAD TO REPLACE A HANDLE A PIECE OF STEEL CAME OFF THE HAMMER AND LODGED IN RT LEG JUST ABOVE KNEE