Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
WAS CUTTING CAR FILTER LID OPEN WITH FILTER CUTTER. CUT HIS LEFT THUMB ON THE CONTACT SURFACE, RESULTING IN SUTURES.
EMP WAS CUTTING SHOT CORD WITH DULL KNIFE. WAS CUTTING TOWARD HIM INSTEAD OF PROPERLY CUTTING AWAY FROM BODY AND CUT THUMB WHICH REQUIRED SUTURES.
EMPLOYEE WAS DRIVING A RIPPER CHAIN PIN ON CM03 WITH A HAMMER WHEN A CHIP CAME OFF THE PIN STRIKING THE EMPLOYEE IN THE THIGH. EMPLOYEE WAS SENT TO DOCTOR TO HAVE THE CHIP REMOVED. EMPLOYEE RE TURNED TO WORK WITH FULL RELEASE.
WHILE PICKING & SHOVELING EE SPRAINED LEFT FOREARM.
AN EMPLOYEE WAS LIFTING A NEW CLUTCH INTO PLACE WITH A NYLON ROPE. THE INJURED EMPLOYEE WAS GUIDING THE CLUTCH INTO PLACE FROM UNDER THE TRUCK WHEN THE ROPE BROKE AND THE CLUTCH FELL ON HIS FI NGER. HIS FINGER REQUIRED 10 SUTURES AND EMPLOYEE WAS PLACED ON RESTRICTED DUTY.
SLEDGE HAMMER BLOW TO RIGHT KNEE CAP. COWORKER WAS HAMMERING TOOL JOINT LOOSE--MISSED AND HIT EE.
EMPLOYEE WAS HANGING A LOADER CABLE AT #2 ENTRY LBS #2. EMPLOYEE WAS STANDING GROUND LEVEL LIFTING THE CABLE WITH A CRUTCH. THE HOOK WAS 10.5 FTHIGH WHEN THE CABLE STARTED TO SWAY BACK AND FOR TH. THE EMPLOYEE LET THE CABLE FALL AWAY FROM HIM DISLOCATING HIS SHOULDER.
EMPLOYEE WAS USING A HAMMER TO DRIVE IN A METAL PIN. TWO METAL SPLINTER STRUCK HHIM IN TEH STOMACH. HE PULLED ONE OUT, NOT KNOWING HT EOTHER REMAINED. THE OTHER CAM EOUT BY ITSELF A FEW DAY S LATER. A SMALL INFECTION DEVELOPED WHICH WAS TREATED ON SITE WITH OINTMENT.
EE STRUCK HIMSELF IN THE FACE WITH A SMALL PRYBAR. SMALL CUT ON RIGHT SIDE OF FACE REQUIRING TWO SUTURES.
EMPLOYEE WAS TAKING A STEERING ARM OFF OF SC#30 SHUTTLE CAR USING A 3/4" ALLEN WRENCH AND HAMMER. UPON STRIKING THE ALLEN WRENCH WITH THE HAMMERTO BREAK BOLT LOOSE, THE ALLEN WRENCH CAME OF AL LEN HEAD BOLT AND HIT EMPLOYEE IN THE UPPER LIP.
THE EMPLOYEE WAS USING A TOOL WITH A HOOK ARRANGEMENT ON THE END IN ATTEMPT TO LIFT, ROTATE AND/OR FREE A STUCK ROCK. THIS HAND WAS CAUGHT BETWEEN THE TOOL AND NEARBY STRUCTURE. HIS HAND WAS C UT AND REQUIRED MEDICAL TREATMENT.
EMPLOYEE WAS USING A HAMMER TO ALIGN A MACHINE PART. A SMALL CHIP OF METAL FLEW OFF STRIKING, THE EMPLOYEE ON THE RIGTH CALF. THE CHIP WAS REMOVED BY A PHYSCIAN.
WHILE TAPPING A SPACER BAR INTO PLACE ON A SCREEN THE EMPLOYEE STRUCK HIS LEFT INDEX FINGER CAUSING A CHIPPED BONE.
EMPLOYEE WAS CUTTING OFFEND OF 1/2IN HOMP ROPE WITH POCKET KNIFE WHEN ROPE DIDNT CUT THRU AFTER 2 OR 3 SWIPES OF THE KNIFE METHOD OF CUTTING AWAY WAS ABONDONED & ROPE WAS LAID AGAINST SCAFFOLD TO CUT TOWARD IT KNIFE SLIPPED & CUT LEFT INDEXFINGER AT THE KNUCKLE
WHILE TRIGHTENING A BOLT ON A U SHAPED CLAMP THE EE HAD THE WRENCH SLIP AND HIS FORWARD MOMENTUM CAUSED HIM TO STRIKE HIS LIP AGAINST THE SIDE OF THE MACHINERY HE WAS WORKING ON. THIS REQUIRED TWO STITCHES TO CLOSE.
TIGHTENING BOLT WRENCH SLIPPED OFF BOLT STRIKING ON MOUTH
SHOVELING CLODS UNDER FEEDER. RAISED UP, HIT HEAD ON BRACE (HARD HAT ON) UNDER FEEDER.
AN EE PLACED HIS RATCHET WR4ENCH ON A TANK PLATFORM ABOVE HIM AND HAD THE WRENCH FALL AND STRIKING HIS FINGER.
PLACING SPACERS BETWEEN HINGE TO LOOSEN TAILGATE TAILGATE CLOSED SUDDENLY ON L HNAD MASHING MIDDLE FINGER
WHILE POUNDING A BIT INTO A BIT HOLDER ON A CONTINUOUS MINER,THE EMPLOYEE HAD AN UNKNOWN PARTICLE FLY INTO HIS EYE.THE DOCTOR PRESCRIBED ANTIBIOTIC DROPS FOR TREATMENT.
THE EMPLOYEE WAS ASSISTING A MECHANIC IN PLACING A NEW LINE ON A DOZER. THE LINE HAD A PROTECTIVE CAP OVER ONE END AND THE EMPLOYEE WAS CUTTING THE CAP OFF. HIS KNIFE SUDDENLY CUT THROUGH THE CAP CUTTING THE EMPLOYEE'S HAND. THE INJURED RESULTED IN A LACERATION OF THE LEFT HAND BETWEEN THE THUMB AND FOREFINGER REQUIRING SUTURES.
USING PIPE TO LEVER TRAILER HIGHER AND WHEN DOING PULLED MUSLCE IN R ELBOW
AFTER A DRIVE CHAIN ON A DRAG FEEDER. EQUIPMENT WAS BEING JOGGED TO INSPECT FOR PROBLEMS WHEN THE CHAIN SNAPPED STRIKING EE ON THE LEFT EAR.
WHILE INSTALLING LOCK RINGS ON THE MINER DRUM END COVER, A HAMMER SLIPPED OFF THE EDGE OF THE TOOL AND HIT HIS FINGER.
WRENCH SLIPPED AND FINGER STRUCK SHARP METAL AND CUT HIS FINGER.
WHILE LOOSENING A BOLT, THE EXTENSION POPPED OFF RATCHET. THE EXTENSION FLIPPED, HITTING HIM ON THE CHIN AND CHIPPING A TOOTH.
WHILE USING A CHISEL AND HAMMER, THE CHISEL FLEW BACK AND HIT THIS THUMB, CAUSING IT TO SWELL. EE WAS SENT TO THE DR. FOR X RAY. NO FRACTURE WAS FOUND. DR IMMOBILIZED FINGER TO PREVENT FURTHER IRRITATION.
EMPLOYEE WAS OPENING 6" VALVE IN (UNREADABLE) AND FAILED TO PUT VALVE WRENCH NEAR SPOKE IN WHEEL WHEN HE PULLED WRENCH IT SLIPPED ON WHEEL.
EMPL WAS ASSISTING IN THE REMOVAL OF A CHAIN LINK ON THE COLLER DRIVE WHEN ANOTHER EMPL WHO WAS STRIKING THE SAME CHAIN LINK WITH A HAMMER CAUSED A SMALL PIECE OF THE LINK PIN TO BREAK OFF AND LODGE JUST UNDER THE SKIN IN AN AREA JUST BELOW THE EMPLS CHIN THE EMPL WAS POSITIONED APPROX AN ARMS LENGTH FROM THE CHAIN AND FACING THE WORK BOTH EMPLS WERE WEARING SAFETY GLASSES
EMPLOYEE WAS CUTTING A FITTING OFF OF A 4" SUCTION HOSE USING A POCKET KNIFE. IT SLIPPED AND CUT HIS LEFT HAND. EMPLOYEE WAS SENT TO THE DR'S OFFICE AND RECEIVED 8 SUTURES.
EMPL PULLING BO PIN ON SPLICE USING VICE GRIPS.PIN BROKE AND VISE GRIPS HIT HIM IN MOUTH CHIPPING UPPER LEFT CUSPID.
WORKTRUCK BECAME STUCK IN WASH. A HIGH LIFT JACK WAS BEING USED TO LIFT TRUCK. THE JACK MAL-FUNCTIONED CAUSING THE ACCIDENT.